0
RESEARCH PAPERS

Heat Transfer Coefficients Over a Flat Surface With Air and CO2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method

[+] Author and Article Information
S. V. Ekkad, D. Zapata, J. C. Han

Turbine Heat Transfer Laboratory, Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123

J. Turbomach 119(3), 580-586 (Jul 01, 1997) (7 pages) doi:10.1115/1.2841161 History: Received February 04, 1995; Online January 29, 2008

Abstract

This paper presents the detailed heat transfer coefficients over a flat surface with one row of injection holes inclined streamwise at 35 deg for three blowing ratios (M = 0.5–2.0). Three compound angles of 0, 45, and 90 deg with air (D.R. = 0.98) and CO2 (D.R. = 1.46) as coolants were tested at an elevated free-stream turbulence condition (Tu ≈ 8.5 percent). The experimental technique involves a liquid crystal coating on the test surface. Two related transient tests obtained detailed heat transfer coefficients and film effectiveness distributions. Heat transfer coefficients increase with increasing blowing ratio for a constant density ratio, but decrease with increasing density ratio for a constant blowing ratio. Heat transfer coefficients increase for both coolants over the test surface as the compound angle increases from 0 to 90 deg. The detailed heat transfer coefficients obtained using the transient liquid crystal technique, particularly in the near-hole region, will provide a better understanding of the film cooling process in gas turbine components.

Copyright © 1997 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In