Bons,
J. P.
, 2002, “
St and
cf Augmentation for Real Turbine Roughness With Elevated Freestream Turbulence,” ASME J. Turbomach.,
124(4), pp. 632–644.
[CrossRef]
Lewis,
S.
,
Barker,
B.
,
Bons,
J. P.
,
Ai,
W.
, and
Fletcher,
T. H.
, 2011, “
Film Cooling Effectiveness and Heat Transfer Near Deposit-Laden Film Holes,” ASME J. Turbomach.,
133(3), p. 031003.
[CrossRef]
Dunn,
M. G.
,
Baran,
A. J.
, and
Miatech,
J.
, 1996, “
Operation of Gas Turbine Engines in Volcanic Ash Clouds,” ASME J. Eng. Gas Turbines Power,
118(4), pp. 724–731.
[CrossRef]
Lawson,
S. A.
,
Lynch,
S. P.
, and
Thole,
K. A.
, 2012, “
Simulations of Multi-Phase Particle Deposition on a Non-Axisymmetric Contoured Endwall With Film-Cooling,” ASME Paper No. GT2012-68174.
Albert,
J. E.
, and
Bogard,
D. G.
, 2013, “
Experimental Simulation of Contaminant Deposition on a Film-Cooled Turbine Vane Pressure Side With a Trench,” ASME J. Turbomach.,
135(5), p. 051008.
Jensen,
J. W.
,
Squire,
S. W.
,
Bons,
J. P.
, and
Fletcher,
T. H.
, 2005, “
Simulated Land-Based Turbine Deposits Generated in an Accelerated Deposition Facility,” ASME J. Turbomach.,
127(3), pp. 462–470.
[CrossRef]
Murphy,
R. G.
,
Nix,
A. C.
,
Lawson,
S. A.
,
Straub,
D.
, and
Beer,
S. K.
, 2012, “
Preliminary Experimental Investigation of the Effects of Particulate Deposition on IGCC Turbine Film-Cooling in a High-Pressure Combustion Facility,” ASME Paper No. GT2012-68806.
Webb,
J.
,
Casaday,
B.
,
Barker,
B.
,
Bons,
J. P.
,
Gledhill,
A. D.
, and
Padture,
N. P.
, 2013, “
Coal Ash Deposition on Nozzle Guide Vanes—Part I: Experimental Characteristics of Four Coal Ash Types,” ASME J. Turbomach.,
135(2), p. 021033.
Brach,
R. M.
, and
Dunn,
P. F.
, 1992, “
A Mathematical Model of the Impact and Adhesion of Microspheres,” Aerosol Sci. Technol.,
16(1), pp. 51–64.
[CrossRef]
Thornton,
C.
, and
Ning,
Z.
, 1998, “
A Theoretical Model for the Stick/Bounce Behavior of Adhesive, Elastic-Plastic Sheres,” Powder Technol.,
99(2), pp. 154–162.
[CrossRef]
Sreedharan,
S. S.
, and
Tafti,
D. K.
, 2010, “
Composition Dependent Model for the Prediction of Syngas Ash Deposition With the Application to a Leading Edge Turbine Vane,” ASME Paper No. GT2010-23655.
Singh,
S.
, and
Tafti,
D.
, 2013, “
Predicting the Coefficient of Restitution for Particle Wall Impacts in Gas Turbine Components,” ASME Paper No. GT2013-95623.
Shang,
T.
, and
Epstein,
A. H.
, 1997, “
Analysis of Hot Streak Effects on Turbine Rotor Heat Load,” ASME J. Turbomach.,
119(3), pp. 544–553.
Povey,
T.
,
Chana,
K. S.
,
Jones,
T. V.
, and
Hurrion,
J.
, 2007, “
The Effect of Hot-Streaks on HP Vane Surface and Endwall Heat Transfer: An Experimental and Numerical Study,” ASME J. Turbomach.,
129(1), pp. 32–43.
Ong,
J.
, and
Miller,
R.
, 2008, “
Hot Streak and Vane Coolant Migration in a Downstream Rotor,” ASME Paper No. GT2008-50971.
Qingjun,
Z.
,
Hulshe,
W.
,
Xlaolu,
Z.
, and
Jianzhong,
X.
, 2007, “
Numerical Investigation on the Influence of Hot Streak Temperature Ratio in a High-Pressure Stage of Vaneless Counter-Rotating Turbine,” Int. J. Rotating Mach.,
2007, p. 56097.
[CrossRef]
Chambers,
J. C.
, 1985, “
The 1982 Encounter of British Airways 747 With the Mt. Galunggung Eruption Cloud,” AIAA Paper No. 85-0097.
Casaday,
B.
,
Ameri,
A.
, and
Bons,
J. P.
, 2012, “
Effect of Hot Streaks on Ash Deposition in an Uncooled Turbine Vane Passage,” AIAA Paper No. 2012-0474.
Casaday,
B.
,
Prenter,
R.
,
Bonilla,
C.
,
Lawrence,
M.
,
Clum,
C.
,
Ameri,
A.
, and
Bons,
J. P.
, 2013, “
Deposition With Hot Streaks in an Uncooled Turbine Vane Passage,” ASME J. Turbomach.,
136(4), p. 041017.
Ai,
W.
,
Murray,
N.
,
Fletcher,
T. H.
,
Harding,
S.
,
Lewis,
S.
, and
Bons,
J.
, 2012, “
Deposition Near Film Cooling Holes on a High Pressure Turbine Vane,” ASME J. Turbomach.,
134(4), p. 041013.
Bonilla,
C.
,
Webb,
J.
,
Clum,
C.
,
Casaday,
B.
,
Brewer,
E.
, and
Bons,
J.
, 2012, “
The Effect of Particle Size and Film Cooling on Nozzle Guide Vane Deposition,” ASME J. Eng. Gas Turbines Power,
134(10), p. 101901.
Borello,
D.
,
D'Angeli,
L.
,
Salvagni,
A.
,
Venturini,
P.
, and
Rispoli,
F.
, 2014, “
Study of Particles Deposition in Gas Turbine Blades in Presence of Film Cooling,” ASME Paper No. GT2014-26250.
Prenter,
R.
,
Whitaker,
S.
,
Ameri,
A.
, and
Bons,
J. P.
, 2014, “
The Effects of Slot Film Cooling on Deposition on a Nozzle Guide Vane,” ASME Paper No. GT2014-27171.
Prenter,
R.
,
Ameri,
A.
, and
Bons,
J. P.
, 2015, “
Measurement and Prediction of Hot Streak Profiles Generated by Axially Opposed Dilution Jets,” AIAA Paper No. 2015-0304.
Whitaker,
S.
,
Prenter,
R.
, and
Bons,
J.
, 2015, “
The Effect of Free-Stream Turbulence on Deposition for Nozzle Guide Vanes,” ASME J. Turbomach.,
137(12), p. 121001.
ANSYS, 2011, “
Ansys Fluent User's Guide,”
ANSYS Inc.,
Canonsburg, PA.
N'Dala,
I.
,
Cambier,
F.
,
Anseau,
M. R.
, and
Urbain,
G.
, 1984, “
Viscosity of Liquid Feldspars. Part I: Viscosity Measurements,” Br. Ceram. Trans. J.,
83(4), pp. 108–112.
Senior,
C. L.
, and
Srinivasachar,
S.
, 1995, “
Viscosity of Ash Particles in Combustion Systems for Prediction of Particle Sticking,” Energy and Fuels,
9(2), pp. 277–283.
[CrossRef]
Dorney,
D.
, and
Schwab,
J.
, 1996, “
Unsteady Numerical Simulations of Radial Temperature Profile Redistribution in a Single-Stage Turbine,” ASME J. Turbomach.,
118(4), pp. 783–791.
Whitaker,
S. M.
,
Reilly,
D.
, and
Bons,
J. P.
, 2013, “
A Survey of Airborne Particle Impact Characteristics Using High Speed Particle Shadow Velocimetry,” AIAA Paper No. 2013-2484.