This paper presents model-based design and hardware-in-the-loop (HIL) simulation of engine lean operation. The functionalities of the homogeneous combustion subsystem in engine Electronic Control Unit (ECU) in dSPACE Automotive Simulation Models (ASM) are first analyzed. To control the gasoline engine in lean operation without the drop of output torque, the combustion subsystem in engine ECU is modified by introducing two control loops, torque modifier and fuel multiplier. The performance of these two controllers is evaluated by HIL simulation using a dSPACE HIL simulator. The HIL simulation models, including vehicle plant model and softECUs in HIL simulator and engine lean control model in hardware engine ECU are modeled using model-based design. With HIL simulation, the designed engine control strategies can be immediately tested to evaluate the overall vehicle performance. The HIL simulation results show that the designed lean combustion control strategy can reduce fuel consumption and is able to meet the torque requirement at lean engine operating conditions.
- Dynamic Systems and Control Division
Model-Based Design and Hardware-in-the-Loop Simulation of Engine Lean Operation
- Views Icon Views
- Share Icon Share
- Search Site
Agashe, P, Li, Y, & Chen, B. "Model-Based Design and Hardware-in-the-Loop Simulation of Engine Lean Operation." Proceedings of the ASME 2014 Dynamic Systems and Control Conference. Volume 3: Industrial Applications; Modeling for Oil and Gas, Control and Validation, Estimation, and Control of Automotive Systems; Multi-Agent and Networked Systems; Control System Design; Physical Human-Robot Interaction; Rehabilitation Robotics; Sensing and Actuation for Control; Biomedical Systems; Time Delay Systems and Stability; Unmanned Ground and Surface Robotics; Vehicle Motion Controls; Vibration Analysis and Isolation; Vibration and Control for Energy Harvesting; Wind Energy. San Antonio, Texas, USA. October 22–24, 2014. V003T39A001. ASME. https://doi.org/10.1115/DSCC2014-6000
Download citation file: