In this study, fluid flow induced by a two stage electrohydrodynamic (EHD) gas pump in a square channel has been evaluated by experimental measurement and numerical simulations. This study is implemented for a two stage EHD gas pump with three emitting electrode configurations: 8, 24, and 56 respectively to seek the relation between the number of stages and emitting electrodes. The EHD pump is evaluated for a wide range of operating voltages starting from 20 kV up to 28 kV for further improvement in its performance over a single stage. To achieve the maximum enhancement, the emitting electrodes of the EHD gas pump are flush mounted on the channel walls so that the corona wind produced directly disturbs the boundary layer thickness and improves the heat transfer. This is leading to a higher velocity near the channel walls and resulting in an inverted parabolic velocity profile at the center of the channel, which is opposite to the fully developed velocity profile of a forced flow. Velocities are measured at three cross-sections along the tube length and then integrated to obtain the volume flow rate. The results show that EHD technique has a great potential for many engineering applications.

This content is only available via PDF.
You do not currently have access to this content.