Abstract

Deviated well sections are common in modern well construction. In mature areas like the North Sea region, practically all producers or injector wells will have highly deviated sections. These wells must be drilled and completed in an optimal manner with respect to drill time, cost, risk and functionality. Most cuttings transport and hydraulic models are developed based on tests with model fluids and often in small diameter test sections. Hole cleaning properties and hydraulic behaviour of field fluids differ from those of most model fluids. Furthermore, results from small diameter tests may not always be relevant for, nor scalable to, field applications due to time, length and other scale differences. Hence, there is a need for studies in controlled laboratory environments with various field application designed drilling fluids to improve engineering models and practices.

This paper presents results from laboratory tests using field applied fluids. The drilling fluids have similar density and viscosity within the relevant shear rate range applied during drilling operations and in the tests. One of the fluids is oil-based and the other one is an inhibitive water-based drilling fluid.

This content is only available via PDF.
You do not currently have access to this content.