Volumes | Smart Materials, Adaptive Structures and Intelligent Systems | American Society of Mechanical Engineers Digital Collection

Skip Nav Destination

ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems

September 10–12, 2018

San Antonio, Texas, USA

Conference Sponsors:

ISBN:

978-0-7918-5194-4

In This Volume

Development and Characterization of Multifunctional Materials (22)
Modeling, Simulation, and Control of Adaptive Systems (33)
Integrated System Design and Implementation (28)

Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation, and Control of Adaptive Systems; Integrated System Design and Implementation

Development and Characterization of Multifunctional Materials

Magnetic-Assisted Alignment of Reinforcing Functionalized-Fibers in a Composite for Lightweight Structures

C. Torres-Sánchez, M. Haghihi-Abayneh, P. P. Conway

SMASIS 2018; V001T01A001doi:https://doi.org/10.1115/SMASIS2018-7911

Abstract

View Article

PDF

Topics: Composite materials , Fibers , Lightweight structures , Stress , Carbon fibers , Stiffness , Adhesion , Carbon dioxide , Chemistry , Compression

Influence of the Manufacturing Process on Hot Extruded Shape Memory Alloy Metal Matrix Composites

C. Dahnke, A. E. Tekkaya

SMASIS 2018; V001T01A002doi:https://doi.org/10.1115/SMASIS2018-7934

Abstract

View Article

PDF

Topics: Manufacturing , Metal matrix composites , Shape memory alloys , Wire , Actuators , Bonding , Stress , Aluminum , Composite materials , Extruding

3D-Printed Stretchable Strain Sensor With Application to Wind Sensing

Mohammed Al-Rubaiai, Ryohei Tsuruta, Umesh Gandhi, Chuan Wang, Xiaobo Tan

SMASIS 2018; V001T01A003doi:https://doi.org/10.1115/SMASIS2018-7945

Abstract

View Article

PDF

Topics: Additive manufacturing , Strain sensors , Wind , Wind velocity , Composite materials , Electrical conductivity , Gages , Lithography , Reliability , Robotics

The Ferroelectricity and Crystallinity of Zirconia, Hafnia and Hafnium Zirconium Oxide (HZO) Ultrathin Films Prepared by Atomic Layer Deposition With and Without Post-Annealing

Tzu-Yao Hsu, Bo-Ting Lin, Jay Shieh, Miin-Jang Chen

SMASIS 2018; V001T01A004doi:https://doi.org/10.1115/SMASIS2018-7946

Abstract

View Article

PDF

Topics: Annealing , Zirconium , Crystallization , Plasmas (Ionized gases) , High pressure (Physics) , Temperature , Solid solutions , Thermal stresses

Dynamic Characterization and Control of a Metamaterials-Inspired Smart Composite

Timothy Emerson, Alessio Lozzi, He Bai, James Manimala

SMASIS 2018; V001T01A005doi:https://doi.org/10.1115/SMASIS2018-7961

Abstract

View Article

PDF

Topics: Composite materials , Metamaterials , Additive manufacturing , Cantilever beams , Carbon reinforced plastics , Control algorithms , Control systems , Electricity (Physics) , Electromagnetic spectrum , Energy harvesting

Parametric Design of a Soft Gripper Actuated Using the Electrostrictive PVDF-Based Terpolymer

Wei Zhang, Jonathan Hong, Saad Ahmed, Zoubeida Ounaies, Mary Frecker

SMASIS 2018; V001T01A006doi:https://doi.org/10.1115/SMASIS2018-7966

Abstract

View Article

PDF

Topics: Grippers , Parametric design , Deflection , Design , Finite element analysis , Actuators , Grasping , Biomedicine , Compliant mechanisms , Deformation

On the Potential of Using the Small Punch Test for the Characterization of SMA Behavior Under Multi-Axial Loading Conditions

Björn Kiefer, Jarno Hein, Martin Abendroth, Horst Biermann, Sebastian Henkel, Thomas Niendorf, Philipp Krooß, Yves Chemisky

SMASIS 2018; V001T01A007doi:https://doi.org/10.1115/SMASIS2018-7973

Abstract

View Article

PDF

Topics: Constitutive equations , Damage , Deflection , Failure mechanisms , Fatigue , Fracture (Materials) , Fracture (Process) , Microscale devices , Shape memory alloys , Shapes

Electrical Properties of Additively Manufactured Acrylonitrile Butadiene Styrene/Carbon Nanotube Nanocomposite

Dominic Thaler, Nahal Aliheidari, Amir Ameli

SMASIS 2018; V001T01A008doi:https://doi.org/10.1115/SMASIS2018-8002

Abstract

View Article

PDF

Topics: Additive manufacturing , Carbon nanotubes , Electrical properties , Nanocomposites , Electrical conductivity , Compression , Feedstock , Nozzles , Printing , Bonding

Experimental Study of Multifunctional NCM-Si Batteries With Self-Actuation

Jun Ma, Cody Gonzalez, Christopher Rahn, Mary Frecker, Donghai Wang

SMASIS 2018; V001T01A009doi:https://doi.org/10.1115/SMASIS2018-8004

Abstract

View Article

PDF

Topics: Anodes , Batteries , Cantilevers , Coating processes , Coatings , Design , Displacement , Lithium , Lithium-ion batteries , Manufacturing

Tailoring and Characterization of the Liquid Crystalline Structure of Cellulose Nanocrystals for Opto-Electro-Mechanical Multifunctional Applications

Inseok Chae, Amira Meddeb, Zoubeida Ounaies, Seong H. Kim

SMASIS 2018; V001T01A010doi:https://doi.org/10.1115/SMASIS2018-8016

Abstract

View Article

PDF

Topics: Nanocrystals , Electric fields , Mechanical properties , Biomedical engineering , Biopolymers , Computer numerical control machine tools , Crystals , Dipole moments , Fracture toughness , Functional materials

Linear and Nonlinear Viscoelastic Behavior of MR Fluids: Effect of Temperature

Masoud Hemmatian, Ramin Sedaghati, Subhash Rakheja

SMASIS 2018; V001T01A011doi:https://doi.org/10.1115/SMASIS2018-8033

Abstract

View Article

PDF

Topics: Fluids , Temperature , Viscoelasticity , Magnetic fields , Shear (Mechanics) , Density , Magnetic induction , Rheology , Rheometers , Storage

Melt Processed Conductive Polycarbonate Composites With Ternary Fillers Towards Bipolar Plate Applications

Ahmed Naji, Petra Pötschke, Amir Ameli

SMASIS 2018; V001T01A012doi:https://doi.org/10.1115/SMASIS2018-8046

Abstract

View Article

PDF

Topics: Composite materials , Fillers (Materials) , Carbon nanotubes , Proton exchange membrane fuel cells , Electrical conductivity , Thermal conductivity , Fuel cells , Graphite , Weight (Mass) , Carbon fibers

Self-Adaptable Carbon Fiber Composite

Arnaldo Casalotti, Krishna C. Chinnam, Giulia Lanzara

SMASIS 2018; V001T01A013doi:https://doi.org/10.1115/SMASIS2018-8058

Abstract

View Article

PDF

Topics: Carbon fibers , Composite materials , Temperature , Control systems , Damping , Engineering prototypes , Epoxy adhesives , Epoxy resins , Fibers , Manufacturing

Evaluation of Various Factors on Electrical Properties of GNP-Reinforced Mortar Composites

Osman E. Ozbulut, Zhangfan Jiang, Guohua Xing

SMASIS 2018; V001T01A014doi:https://doi.org/10.1115/SMASIS2018-8062

Abstract

View Article

PDF

Topics: Composite materials , Electrical properties , Mortar , Cements (Adhesives) , Superplasticizers , Graphene , Agglomeration (Materials) , Carbon nanotubes , Chain , Electrical resistivity

Interface Engineering of CNT/Polymer Nanocomposites With Tunable Damping Properties

Michela Talò, Giulia Lanzara, Maryam Karimzadeh, Walter Lacarbonara

SMASIS 2018; V001T01A015doi:https://doi.org/10.1115/SMASIS2018-8066

Abstract

View Article

PDF

Topics: Carbon nanotubes , Damping , Polymer nanocomposites , Coating processes , Coatings , Nanocomposites , Polymers , Stick-slip , Design , Energy dissipation

Multi-Field Processing of Micro-Platelets for Magneto-Active Applications

Md Abdulla Al Masud, Zoubeida Ounaies, Paris von Lockette

SMASIS 2018; V001T01A016doi:https://doi.org/10.1115/SMASIS2018-8080

Abstract

View Article

PDF

Topics: Platelets , Magnetic fields , Chain , Composite materials , Electric fields , Manufacturing , Conducting polymers , Elastomers , Magnetic particles , Magnetization

Energy Harvesting Performance of Printed Barium Titanate Nanocomposites

Mohammad H. Malakooti, Florian Julé, Henry A. Sodano

SMASIS 2018; V001T01A017doi:https://doi.org/10.1115/SMASIS2018-8093

Abstract

View Article

PDF

Topics: Energy harvesting , Nanocomposites , Manufacturing , Additive manufacturing , Nanowires , Energy storage , Inks , Nanomaterials , Nanostructures

Design, Development and Characterization of Linear, Soft Actuators via Additive Manufacturing

Alfonso Costas, Daniel E. Davis, Yixian Niu, Sadegh Dabiri, Jose Garcia, Brittany Newell

SMASIS 2018; V001T01A018doi:https://doi.org/10.1115/SMASIS2018-8097

Abstract

View Article

PDF

Topics: Actuators , Additive manufacturing , Design , Cylinders , Manufacturing , Pistons , Aviation , Durability , Finishes , Fluids

Experimental Validation of Neo-Hookean Fiber Reinforced Elastic Solids

Veysel Erel, Mingliang Jiang, Michael R. Moreno, Alan D. Freed

SMASIS 2018; V001T01A019doi:https://doi.org/10.1115/SMASIS2018-8118

Abstract

View Article

PDF

Topics: Fibers , Solids , Anisotropy , Deformation , Silicones , Laminates

Static and Dynamic Characterization of Magnetorheological Elastomers Under Shear Mode Operation

Ashkan Dargahi, Ramin Sedaghati, Subhash Rakheja

SMASIS 2018; V001T01A020doi:https://doi.org/10.1115/SMASIS2018-8209

Abstract

View Article

PDF

Topics: Elastomers , Shear (Mechanics) , Iron , Magnetic induction , Particulate matter , Excitation , Shear modulus , Stress

Parameter Study of a Multi-Field Actuated, Multilayered, Segmented Flexible Composite Beam

Anil Erol, Paris von Lockette, Mary Frecker

SMASIS 2018; V001T01A021doi:https://doi.org/10.1115/SMASIS2018-8215

Abstract

View Article

PDF

Topics: Active materials , Approximation , Composite building materials , Composite materials , Conducting polymers , Design , Elastomers , Electric fields , Energy consumption , Errors

Structural Health Monitoring of Solid Rocket Propellants Using Piezoresistive Properties of Dispersed Carbon Nano-Tube Sensing Networks

Nishant Shirodkar, Samantha Rocker, Gary D. Seidel

SMASIS 2018; V001T01A022doi:https://doi.org/10.1115/SMASIS2018-8250

Abstract

View Article

PDF

Topics: Carbon , Nanotubes , Solid rocket propellants , Structural health monitoring , Carbon nanotubes , Polymers , Binders (Materials) , Aluminum powders , Crystals , Energetics

Modeling, Simulation, and Control of Adaptive Systems

A Semi-Analytical Model of Shape-Control in an Adaptive Air Foil Bearing

Hossein Sadri, Alexander Kyriazis, Henning Schlums, Michael Sinapius

SMASIS 2018; V001T03A001doi:https://doi.org/10.1115/SMASIS2018-7915

Abstract

View Article

PDF

Topics: Foil bearings , Shapes , Bearings , Rotors , Air bearings , Finite element methods , Finite element model , Geometry , Modeling , Optimization

Suppression of Cross-Well Oscillations With Active Control of a Bistable Laminate

Andrew J. Lee, Antai Xie, Daniel J. Inman

SMASIS 2018; V001T03A002doi:https://doi.org/10.1115/SMASIS2018-7919

Abstract

View Article

PDF

Topics: Laminates , Oscillations , Dynamics (Mechanics) , Vibration , Composite materials , Control equipment , Energy conversion , Energy harvesting , Excitation , Feedback

A Piezoelectric Metamaterial With Bistable Circuit Shunts for Adaptive Non-Reciprocal Elastic Wave Transmission

Yisheng Zheng, Zhen Wu, Xinong Zhang, K. W. Wang

SMASIS 2018; V001T03A003doi:https://doi.org/10.1115/SMASIS2018-7924

Abstract

View Article

PDF

Topics: Circuits , Elastic waves , Metamaterials , Excitation , Energy gap , Wave energy , Dynamics (Mechanics) , Resonance , Wave propagation , Waves

Feasibility Research on Coupled Friction/Piezoelectric Dampers

Lin Li, Yaguang Wu, Yu Fan

SMASIS 2018; V001T03A004doi:https://doi.org/10.1115/SMASIS2018-7933

Abstract

View Article

PDF

Topics: Dampers , Friction , Dry friction , Damping , Aircraft engines , Circuits , Deformation , Degrees of freedom , Energy conversion , Piezoelectric materials

Coupled Band Gaps in the Piezoelectric Composite Plate With Interconnected Electric Impedance

Lin Li, Zhou Jiang, Yu Fan, Jun Li

SMASIS 2018; V001T03A005doi:https://doi.org/10.1115/SMASIS2018-7948

Abstract

View Article

PDF

Topics: Composite materials , Energy gap , Waves , Wavelength , Deformation , Finite element methods , Piezoelectric materials , Plates (structures)

Forced Vibration Analysis of FG-Graphene Platelet Reinforced Polymer Composite Shells Bonded With Piezoelectric Layers Considering Electroelastic Nonlinearities

M. N. Rao, R. Schmidt, K.-U. Schröder

SMASIS 2018; V001T03A006doi:https://doi.org/10.1115/SMASIS2018-7978

Abstract

View Article

PDF

Topics: Graphene , Platelets , Polymer composites , Shells , Vibration analysis , Composite materials , Vibration , Constitutive equations , Resonance , Weight (Mass)

Fabrication and Testing of Kirigami-Inspired Multi-Stable Composites

Aditya Lele, Oliver J. Myers, Suyi Li

SMASIS 2018; V001T03A007doi:https://doi.org/10.1115/SMASIS2018-7981

Abstract

View Article

PDF

Topics: Composite materials , Manufacturing , Testing , Laminates , Cutting , Deformation , Design , Fibers , Energy harvesting , Shapes

Capturing Age-Dependent Properties of Human Skin Using Magnetorheological Elastomers

Kyle Weaver, Jeong-Hoi Koo, Tae-Heon Yang, Young-Min Kim

SMASIS 2018; V001T03A008doi:https://doi.org/10.1115/SMASIS2018-8015

Abstract

View Article

PDF

Topics: Elastomers , Skin , Stiffness , Testing , Magnetic fields , Mechanical properties , Artificial skin , Biomedicine , Fillers (Materials) , Iron

Optimization of Vibration Reduction in a Helicopter Blade With 2 Way Fluid-Structure Interaction

Mürüvvet Sinem Sicim, Metin Orhan Kaya

SMASIS 2018; V001T03A009doi:https://doi.org/10.1115/SMASIS2018-8017

Abstract

View Article

PDF

Topics: Blades , Fluid structure interaction , Optimization , Vibration , Actuators , Fibers , Cantilever beams , Flight , Aerospace industry , Airfoils

Hybrid Mass Damper Experimental Analysis of Shock Response

Kevin Billon, Matthias Perez, Simon Chesné, Guoying Zhao, Christophe Collette

SMASIS 2018; V001T03A010doi:https://doi.org/10.1115/SMASIS2018-8025

Abstract

View Article

PDF

Topics: Dampers , Experimental analysis , Shock (Mechanics) , Magnets , Blades , Computer simulation , Control equipment , Degrees of freedom , Feedback , Passive damping

Modeling Hydrogel-Controlled Micro-Reactors for Enzyme Assays With Finite Elements for Improved Flow and Filling Distribution

Philipp J. Mehner, Franziska Obst, David Simon, Jing Tang, Anthony Beck, Denise Gruner, Mathias Busek, Dietmar Appelhans, Uwe Marschner, Brigitte Voit, Andreas Richter

SMASIS 2018; V001T03A011doi:https://doi.org/10.1115/SMASIS2018-8027

Abstract

View Article

PDF

Topics: Assaying , Enzymes , Finite element analysis , Flow (Dynamics) , Hydrogels , Modeling , Microfluidics , Design , Circuits , Computer-aided design

Active Control of Origami Inspired Camber Morphing Airfoil for Gust Load Alleviation

Kaman Thapa Magar, Kazuko Fuchi, Alexander M. Pankonien, Richard V. Beblo, Gregory W. Reich

SMASIS 2018; V001T03A012doi:https://doi.org/10.1115/SMASIS2018-8040

Abstract

View Article

PDF

Topics: Airfoils , Origami-inspired design , Stress , Chords (Trusses) , Vibration , Vibration suppression , Design , Control equipment , Control systems , Degrees of freedom

Design of a Beam-Based Variable Stiffness Actuator via Shape Optimization in a CAD/CAE Environment

Pietro Bilancia, Giovanni Berselli, Umberto Scarcia, Gianluca Palli

SMASIS 2018; V001T03A013doi:https://doi.org/10.1115/SMASIS2018-8053

Abstract

View Article

PDF

Topics: Actuators , Computer-aided design , Computer-aided engineering , Design , Shape optimization , Stiffness , Robots , Compliant mechanisms , Safety , Additive manufacturing

Estimation of Distribution Errors in Piezoelectric Subordinate Oscillator Arrays

Sai Tej Paruchuri, Andrew Kurdila, Joseph Vignola

SMASIS 2018; V001T03A014doi:https://doi.org/10.1115/SMASIS2018-8065

Abstract

View Article

PDF

Topics: Errors , Frequency response , Vibration , Manufacturing

Analytical Model of Shape Memory Alloy Helical Springs

Wael Zaki, N. V. Viet

SMASIS 2018; V001T03A015doi:https://doi.org/10.1115/SMASIS2018-8075

Abstract

View Article

PDF

Topics: Shape memory alloys , Springs , Constitutive equations , Deformation , Engineering systems and industry applications , Finite element analysis , Phase transitions

Analytical Model for a Functionally Graded Material/Shape Memory Alloy Laminated Composite Cantilever Beam

Wael Zaki, N. V. Viet

SMASIS 2018; V001T03A016doi:https://doi.org/10.1115/SMASIS2018-8076

Abstract

View Article

PDF

Topics: Cantilever beams , Composite materials , Functionally graded materials , Shape memory alloys , Finite element analysis , Phase transitions , Young's modulus

A Tailored Nonlinear Slat-Cove Filler for Airframe Noise Reduction

Gaetano Arena, Rainer Groh, Alberto Pirrera, William Scholten, Darren Hartl, Travis Turner

SMASIS 2018; V001T03A017doi:https://doi.org/10.1115/SMASIS2018-8079

Abstract

View Article

PDF

Topics: Fillers (Materials) , Noise control , Composite materials , Noise (Sound) , Deformation , Acoustics , Air flow , Design , Displacement , Fatigue

Essentially Nonlinear Piezoelectric Attachment for Aeroelastic Flutter Suppression

Gabriela Mayumi de Freitas Otsubo, Carlos De Marqui, Jr.

SMASIS 2018; V001T03A018doi:https://doi.org/10.1115/SMASIS2018-8094

Abstract

View Article

PDF

Topics: Circuits , Energy transformation , Flutter (Aerodynamics) , Resonance , Robustness , Stiffness

Effects of Bandgap Formation on the Aeroelastic Behavior of a Plate-Like Wing

João Henrique Ribeiro Dainezi, Gabriel Bellomi Schiavon, Carlos De Marqui, Jr.

SMASIS 2018; V001T03A019doi:https://doi.org/10.1115/SMASIS2018-8095

Abstract

View Article

PDF

Topics: Energy gap , Wings , Flow (Dynamics) , Flutter (Aerodynamics) , Air flow , Excitation , Frequency response , Periodic structures , Stress

An Investigation of the Electroaeroelastic Behavior of a Locally Resonant Piezoelectric Metastructure

Gabriel B. Schiavon, Joao H. R. Dainezi, Carlos De Marqui, Jr.

SMASIS 2018; V001T03A020doi:https://doi.org/10.1115/SMASIS2018-8096

Abstract

View Article

PDF

Topics: Resonance , Smart materials , Wings , Actuators , Aeroelasticity , Air flow , Circuits , Control systems , Finite element analysis , Passive control

Numerical Techniques to Model Fractional-Order Nonlinear Viscoelasticity in Soft Elastomers

Paul Miles, Graham Pash, William Oates, Ralph C. Smith

SMASIS 2018; V001T03A021doi:https://doi.org/10.1115/SMASIS2018-8102

Abstract

View Article

PDF

Topics: Elastomers , Viscoelasticity , Modeling , Adaptive structures , Approximation

Nonlocal Buckling Characteristics of Functionally Graded Nano-Plates Subjected to Thermal Loads and Biaxial Linearly Varying Forces

Ma’en S. Sari, Seyedeh Sepideh Ghaffari, Samantha Ceballes, Abdessattar Abdelkefi

SMASIS 2018; V001T03A022doi:https://doi.org/10.1115/SMASIS2018-8107

Abstract

View Article

PDF

Topics: Buckling , Plates (structures) , Stress , Boundary-value problems , Ceramics , Constitutive equations , Elasticity , Equations of motion , Hamilton's principle , Mechanical properties

Linear Parameter Varying Modeling and Estimation of a SMA Wire Actuator

Kyle Kubik, Austin Gurley, David Beale, Amanda Skalitzky

SMASIS 2018; V001T03A023doi:https://doi.org/10.1115/SMASIS2018-8121

Abstract

View Article

PDF

Topics: Actuators , Modeling , Wire , Crystals , Temperature , Approximation , Linear systems , Muscle , Phase transitions , Shape memory alloys

Piezoelectric Vibration Control of a Sandwich Beam With Tip Mass

Eshagh Farzaneh, Oumar Barry, Pablo Tarazaga

SMASIS 2018; V001T03A024doi:https://doi.org/10.1115/SMASIS2018-8127

Abstract

View Article

PDF

Topics: Actuators , Algorithms , Boundary-value problems , Center of mass , Computer software , Equations of motion , Feedback , Finite element analysis , Hamilton's principle , Partial differential equations

Simulation of a Composite Piezoelectric and Glass Fiber Reinforced Polymer Beam for Adaptive Stiffness Applications

Srinivas Koushik Gundimeda, Selin Kunc, John A. Gallagher, Roselita Fragoudakis

SMASIS 2018; V001T03A025doi:https://doi.org/10.1115/SMASIS2018-8132

Abstract

View Article

PDF

Topics: Composite materials , Glass fibers , Polymers , Simulation , Stiffness , Fibers , Stress , Deflection , Glass reinforced plastics , Springs

Data-Driven Modeling Techniques to Estimate Dispersion Relations of Structural Components

Vijaya V. N. Sriram Malladi, Mohammad I. Albakri, Pablo A. Tarazaga, Serkan Gugercin

SMASIS 2018; V001T03A026doi:https://doi.org/10.1115/SMASIS2018-8135

Abstract

View Article

PDF

Topics: Dispersion relations , Modeling , Structural elements (Construction) , Frequency response , Boundary-value problems , Computer simulation , Dimensions , Elastic waves , Fittings , Wave equations

Deep Learning Based Spectrum Compression Algorithm for Rotating Machinery Condition Monitoring

Gürkan Aydemir

SMASIS 2018; V001T03A027doi:https://doi.org/10.1115/SMASIS2018-8137

Abstract

View Article

PDF

Topics: Algorithms , Compression , Condition monitoring , Machinery , Bearings , Maintenance , Signals , Artificial neural networks , Feature extraction , Flaw detection

On the Lifetime Performance of a Styrenic Rubber Membrane for Dielectric Elastomer Transducers

Chen Yi, Lorenzo Agostini, Marco Fontana, Giacomo Moretti, Rocco Vertechy

SMASIS 2018; V001T03A028doi:https://doi.org/10.1115/SMASIS2018-8143

Abstract

View Article

PDF

Topics: Elastomers , Membranes , Rubber , Transducers , Capacitance , Natural rubber , Reliability , Silicones , Stress

Parametric Study of Helicopter Blade for Active Twist Control Incorporating Macro Fiber Composite Actuator

Mürüvvet Sinem Sicim, Dinçer Demirci, Metin Orhan Kaya

SMASIS 2018; V001T03A029doi:https://doi.org/10.1115/SMASIS2018-8144

Abstract

View Article

PDF

Topics: Actuators , Blades , Composite materials , Fibers , Rotors , Spar platforms , Stress , Wing spars , Design , Fluid structure interaction

Investigation of Elastic Meta-Structures With Periodic Localized Stress-Fields

Mohammad I. Albakri, Pablo A. Tarazaga

SMASIS 2018; V001T03A030doi:https://doi.org/10.1115/SMASIS2018-8147

Abstract

View Article

PDF

Topics: Stress , Energy gap , Deformation , Vibration , Acoustics , Elastic waves , Electromagnetic spectrum , Timoshenko beam theory , Wave propagation

Electro-Active Polymer Based Self-Folding Approach Devoted to Origami-Inspired Structures

Amine Benouhiba, Kanty Rabenorosoa, Patrick Rougeot, Morvan Ouisse, Nicolas Andreff

SMASIS 2018; V001T03A031doi:https://doi.org/10.1115/SMASIS2018-8153

Abstract

View Article

PDF

Topics: Origami-inspired design , Polymers

Experimental Validation of Adaptive Control for a Shape Memory Alloy Actuated Lightweight Robotic Arm

Serket Quintanar-Guzmán, Somasundar Kannan, Holger Voos, Mohamed Darouach, Marouane Alma

SMASIS 2018; V001T03A032doi:https://doi.org/10.1115/SMASIS2018-8165

Abstract

View Article

PDF

Topics: Adaptive control , Robotics , Shape memory alloys , Wire , Degrees of freedom , Design , Hardware , Modeling , Nonlinear dynamics

Design and Analysis of SMA Woven Fabric

Amanda Skalitzky, Austin Gurley, David Beale, Kyle Kubik

SMASIS 2018; V001T03A033doi:https://doi.org/10.1115/SMASIS2018-8206

Abstract

View Article

PDF

Topics: Design , Textiles , Nickel titanium alloys , Wire , Actuators , Biomedicine , Robotics , Temperature , Tension , Aerospace industry

Integrated System Design and Implementation

Smart Trailing Edges for Wind Turbines

Johannes Riemenschneider, Martin Pohl, Róbert Ungurán, Vlaho Petrović, Martin Kühn, Ayan Haldar, Hinesh Madhusoodanan, Eelco Jansen, Raimund Rolfes

SMASIS 2018; V001T04A001doi:https://doi.org/10.1115/SMASIS2018-7916

Abstract

View Article

PDF

Topics: Wind turbines , Stress , Blades , Fatigue , Rotors , Compliant mechanisms , Design , Simulation , Structural design , Wind shear

Active-Contracting Variable-Stiffness Fabrics for Self-Fitting Wearables

Kevin Eschen, Julianna Abel, Rachael Granberry, Brad Holschuh

SMASIS 2018; V001T04A002doi:https://doi.org/10.1115/SMASIS2018-7920

Abstract

View Article

PDF

Topics: Fittings , Stiffness , Textiles , Actuators , Design , Pressure , Shapes , Biomedicine , Deflection , Experimental analysis

Structural Design of a Multifunctional Morphing Fowler Flap for a Twin-Prop Regional Aircraft

Francesco Rea, Francesco Amoroso, Rosario Pecora, Maria Chiara Noviello, Maurizio Arena

SMASIS 2018; V001T04A003doi:https://doi.org/10.1115/SMASIS2018-7937

Abstract

View Article

PDF

Topics: Aircraft , Structural design , Design , Airfoils , Finite element analysis , Flight , Kinematics , Motors , Shapes , Stress

Design of an Adaptive Twist Trailing Edge for Large Commercial Aircraft Applications

Francesco Rea, Francesco Amoroso, Rosario Pecora, Markus Kintscher

SMASIS 2018; V001T04A004doi:https://doi.org/10.1115/SMASIS2018-7939

Abstract

View Article

PDF

Topics: Aircraft , Design , Wings , Composite materials , Stress , Weight (Mass) , Chords (Trusses) , Deformation , Drag (Fluid dynamics) , Embedded systems

A Multi-Point Loaded Piezocomposite Beam: Mechanics and Response to Harmonic Excitation

Patrick S. Heaney, Onur Bilgen

SMASIS 2018; V001T04A005doi:https://doi.org/10.1115/SMASIS2018-7940

Abstract

View Article

PDF

Topics: Boundary-value problems , Dynamic response , Excitation , Symmetry (Physics) , Vibration

A Multi-Point Loaded Piezocomposite Beam: Experiments on Sensing and Vibration Energy Harvesting

Patrick S. Heaney, Onur Bilgen

SMASIS 2018; V001T04A006doi:https://doi.org/10.1115/SMASIS2018-7941

Abstract

View Article

PDF

Topics: Energy harvesting , Vibration , Piezoelectric materials , Shapes

A Piezocomposite Trailing-Edge for Subsonic Aircraft

Cody Wright, Onur Bilgen

SMASIS 2018; V001T04A007doi:https://doi.org/10.1115/SMASIS2018-7943

Abstract

View Article

PDF

Topics: Aircraft , Airfoils , Design , Actuators , Drag (Fluid dynamics) , Fluid structure interaction , Stress , Unmanned aerial vehicles , Wings

Induced Strain Actuation for Solid-State Ornithopters: An Aeroelastic Study

Francis Hauris, Onur Bilgen

SMASIS 2018; V001T04A008doi:https://doi.org/10.1115/SMASIS2018-7944

Abstract

View Article

PDF

Topics: Boundary-value problems , Chords (Trusses) , Drag (Fluid dynamics) , Fluid structure interaction , Reynolds number , Wings

A Multi-Point Loaded Piezocomposite Beam: Modeling of Vibration Energy Harvesting

Hesam Sharghi, Onur Bilgen

SMASIS 2018; V001T04A009doi:https://doi.org/10.1115/SMASIS2018-7947

Abstract

View Article

PDF

Topics: Energy harvesting , Modeling , Vibration , Boundary-value problems , Cantilever beams , Deformation , Euler-Bernoulli beam theory , Piezoelectric materials , Stress , Structural health monitoring

Pressure-Driven Morphing Devices for 3D Shape Changes With Multiple Degrees-of-Freedom

Srinivas Vasista, Johannes Riemenschneider, Torsten Mendrock, Hans Peter Monner

SMASIS 2018; V001T04A010doi:https://doi.org/10.1115/SMASIS2018-7949

Abstract

View Article

PDF

Topics: Degrees of freedom , Pressure , Shapes , Additive manufacturing , Actuators , Aircraft , Design , Elastomers , Fluids , Geometry

Peristaltic Pumping and Propulsion With Distributed Piezocomposite Actuators

Onur Bilgen, Ian Bartol, Paul S. Krueger

SMASIS 2018; V001T04A011doi:https://doi.org/10.1115/SMASIS2018-7953

Abstract

View Article

PDF

Topics: Actuators , Propulsion , Excitation , Experimental analysis , Fluids , Hydrostatics , Jet propulsion , Motors , Propulsion systems , Thrust

The Duffing-Holmes Oscillator With Hybrid Position Feedback Controller: Stability and Response Analysis

Mehmet R. Simsek, Onur Bilgen

SMASIS 2018; V001T04A012doi:https://doi.org/10.1115/SMASIS2018-7954

Abstract

View Article

PDF

Topics: Control equipment , Feedback , Stability , Equilibrium (Physics) , Attractors , Blades , Switches , Wind turbines , Wings

Hybrid Skin Design of the Transition Region Between Morphing Wing and Fixed Wing

Martin Radestock, Alexander Falken, Johannes Riemenschneider, Markus Kintscher

SMASIS 2018; V001T04A013doi:https://doi.org/10.1115/SMASIS2018-7976

Abstract

View Article

PDF

Topics: Design , Skin , Wings , Rubber , Glass fibers , Chords (Trusses) , Aircraft , Computer simulation , Deformation , EPDM rubber

Vacuum Gripper System Based on Bistable SMA Actuation

Felix Welsch, Susanne-Marie Kirsch, Paul Motzki, Marvin Schmidt, Stefan Seelecke

SMASIS 2018; V001T04A014doi:https://doi.org/10.1115/SMASIS2018-7980

Abstract

View Article

PDF

Topics: Grippers , Vacuum , Wire , Membranes , Springs , Design , Electronics , Feedback , Heating , Levers

Reduction of Low-Frequency Sound Transmission Using an Array of 3D-Printed Resonant Structures

Stephan Algermissen, Hans P. Monner

SMASIS 2018; V001T04A015doi:https://doi.org/10.1115/SMASIS2018-7985

Abstract

View Article

PDF

Topics: Additive manufacturing , Resonance , Sound , Noise (Sound) , Engines , Design , Electromagnetic spectrum , Phononic crystals , Acoustic intensity , Acoustics

Transient Motion of a Piezoelectrically-Actuated Bistable Beam

Masoud Zarepoor, Onur Bilgen

SMASIS 2018; V001T04A016doi:https://doi.org/10.1115/SMASIS2018-7989

Abstract

View Article

PDF

Topics: Transients (Dynamics) , Blades , Piezoelectric actuators , Stress , Wind turbines , Wings , Aircraft , Energy harvesting , Excitation , Vibration

Designing Fractal Origami Tessellations Through Eigen Analysis

Kazuko Fuchi, Andrew S. Gillman, Alexander B. Cook, Alexander M. Pankonien, Philip R. Buskohl

SMASIS 2018; V001T04A017doi:https://doi.org/10.1115/SMASIS2018-8020

Abstract

View Article

PDF

Topics: Design , Fractals , Boundary-value problems , Shapes , Springs , Trusses (Building) , Wings

Multi-Modal Morphing Wing Flaps for Next Generation Green Regional Aircraft: The CleanSky Challenge

Rosario Pecora

SMASIS 2018; V001T04A018doi:https://doi.org/10.1115/SMASIS2018-8108

Abstract

View Article

PDF

Topics: Aircraft , Wings , Design , Engines , Noise (Sound) , Rotors , Turbofans , Architecture , Aviation , Commercial air transport

Aerodynamic and Structural Evaluation of an SMA Slat-Cove Filler Using Computational and Experimental Tools at Model Scale

William Scholten, Ryan Patterson, Makiah Eustice, Sebastian Cook, Darren Hartl, Thomas Strganac, Travis Turner

SMASIS 2018; V001T04A019doi:https://doi.org/10.1115/SMASIS2018-8129

Abstract

View Article

PDF

Topics: Fillers (Materials) , Computational fluid dynamics , Noise (Sound) , Displacement , Fluid structure interaction , Wind tunnels , Additive manufacturing , Aircraft , Constitutive equations , Deformation

Preliminary Assessment of Morphing Winglet and Flap Tabs Influence on the Aeroelastic Stability of Next Generation Regional Aircraft

Maria Chiara Noviello, Ignazio Dimino, Francesco Amoroso, Antonio Concilio, Rosario Pecora

SMASIS 2018; V001T04A020doi:https://doi.org/10.1115/SMASIS2018-8138

Abstract

View Article

PDF

Topics: Aircraft , Stability , Design , Wings , Flutter (Aerodynamics) , Architecture , Stiffness , Actuators , Clearances (Engineering) , Computation

Active Load Control of a Regional Aircraft Wing Equipped With Morphing Winglets

Federico Fonte, Giuseppe Iannaccone, Nicola Cimminiello, Ignazio Dimino, Sergio Ricci

SMASIS 2018; V001T04A021doi:https://doi.org/10.1115/SMASIS2018-8167

Abstract

View Article

PDF

Topics: Aircraft , Stress , Wings , Flight , Actuators , Control equipment , Deflection , Design , Engineering simulation , Feedforward control

Traveling Waves As a De-Powdering Process for Additively Manufactured Parts

Charles M. Tenney, Vijaya V. N. Sriram Malladi, Patrick F. Musgrave, Christopher B. Williams, Pablo A. Tarazaga

SMASIS 2018; V001T04A022doi:https://doi.org/10.1115/SMASIS2018-8189

Abstract

View Article

PDF

Topics: Additive manufacturing , Traveling waves , Excitation , Signals , Steady state , Actuators , Nylon fabrics , Piezoelectric ceramics , Dynamic response , Geometry

AIRGREEN2 - Clean Sky 2 Programme: Adaptive Wing Technology Maturation, Challenges and Perspectives

Salvatore Ameduri, Antonio Concilio, Ignazio Dimino, Rosario Pecora, Sergio Ricci

SMASIS 2018; V001T04A023doi:https://doi.org/10.1115/SMASIS2018-8235

Abstract

View Article

PDF

Topics: Aerospace industry , Wings

Preliminary Failure Analysis and Structural Design of a Morphing Winglet for Green Regional Aircraft

Ignazio Dimino, Salvatore Ameduri, Antonio Concilio

SMASIS 2018; V001T04A024doi:https://doi.org/10.1115/SMASIS2018-8236

Abstract

View Article

PDF

Topics: Aircraft , Failure analysis , Structural design , Design , Stress , Wings , Flight , Kinematics , Accounting , Actuators

Design of a Leading Edge Morphing Based on Compliant Structures in the Framework of the CS2-AIRGREEN2 Project

Alessandro De Gaspari, Alessandro Gilardelli, Sergio Ricci, Alessandro Airoldi, Frederic Moens

SMASIS 2018; V001T04A025doi:https://doi.org/10.1115/SMASIS2018-8246

Abstract

View Article

PDF

Topics: Design , Aircraft , Skin , Wings

Monolithic Morphing Rib With Selective Stiffness From Embeddable Bi-Stable Elements

D. Matthew Boston, Andres Arrieta, Jose Rivas-Padilla

SMASIS 2018; V001T04A026doi:https://doi.org/10.1115/SMASIS2018-8256

Abstract

View Article

PDF

Topics: Design , Finite element model , Load bearing capacity , Stiffness , Tradeoffs , Trusses (Building) , Weight (Mass)

Ultrasonic Piezoelectric Atomizers: Electromechanical Modeling and Performance Testing

Eric D. Dupuis, Ayyoub M. Momen, Viral K. Patel, Shima Shahab

SMASIS 2018; V001T04A027doi:https://doi.org/10.1115/SMASIS2018-8262

Abstract

View Article

PDF

Topics: Aerosols , Bubbles , Cavitation , Computer simulation , Design , Drops , Drug delivery systems , Drying , Modeling , Piezoelectric transducers