This paper develops a passivity-based robust motion controller for a robot used in prosthetic leg performance studies. The mathematical model of the robot and passive prosthesis corresponds to a three degree-of-freedom, underactuated rigid manipulator. A form of robotic testing of prostheses involves tracking reference trajectories obtained from human gait studies. The robot presented in this paper emulates hip vertical displacement and thigh swing, and we consider a prosthesis with a passive knee for control development. The control objectives are to track commanded hip displacements and thigh angles accurately, even in the presence of parametric uncertainties and large disturbance forces arising from ground contact during the stance phase. We develop a passivity-based controller suitable for an underactuated system and compare it with a simple independent-joint sliding mode controller (IJ-SMC). This paper describes the mathematical model and nominal parameters, derives the passivity-based controller using Lyapunov techniques and reports success in real-time implementation of both controllers, whose advantages and drawbacks are compared.
Robust Tracking Control of a Prosthesis Test Robot
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received February 1, 2013; final manuscript received December 1, 2013; published online February 19, 2014. Assoc. Editor: Won-jong Kim.
- Views Icon Views
- Share Icon Share
- Search Site
Richter, H., and Simon, D. (February 19, 2014). "Robust Tracking Control of a Prosthesis Test Robot." ASME. J. Dyn. Sys., Meas., Control. May 2014; 136(3): 031011. https://doi.org/10.1115/1.4026342
Download citation file: