To give a proper and accurate estimation of the fatigue life of ball grid array (BGA) solder joints, a mechanical fatigue test method under mixed-mode loading is proposed. Experiments were conducted with and solder joints in room temperature. The mechanical low cycle fatigue tests were performed under several loading angles. The loading angle is controlled by several grips which have specific surface angle to the loading direction. Constant displacement controlled tests are performed using a micro-mechanical test apparatus. It was found that the normal deformation significantly affects the fatigue life of the solder joint. Throughout the whole test conditions at room temperature, solder alloy had longer fatigue life than alloy. Failure patterns of the fatigue tests were observed and discussed. A morrow energy model was examined and found to be a proper low cycle fatigue model for solder joints under mixed mode loading condition.
Skip Nav Destination
e-mail: taesang.park@samsung.com
e-mail: sblee@kaist.ac.kr
Article navigation
September 2005
Research Papers
Low Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions
Tae-Sang Park,
e-mail: taesang.park@samsung.com
Tae-Sang Park
Mechatronics & Manufacturing Technology Center
, Corporate Technology Operations, Samsung Electronics Co., LTD, 416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, 443-742, Korea
Search for other works by this author on:
Soon-Bok Lee
Soon-Bok Lee
CARE-Electronic Packaging Laboratory, Department of Mechanical Engineering,
e-mail: sblee@kaist.ac.kr
Korea Advanced Institute of Science and Technology
, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Korea
Search for other works by this author on:
Tae-Sang Park
Mechatronics & Manufacturing Technology Center
, Corporate Technology Operations, Samsung Electronics Co., LTD, 416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, 443-742, Koreae-mail: taesang.park@samsung.com
Soon-Bok Lee
CARE-Electronic Packaging Laboratory, Department of Mechanical Engineering,
Korea Advanced Institute of Science and Technology
, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Koreae-mail: sblee@kaist.ac.kr
J. Electron. Packag. Sep 2005, 127(3): 237-244 (8 pages)
Published Online: May 26, 2004
Article history
Received:
October 1, 2003
Revised:
May 26, 2004
Citation
Park, T., and Lee, S. (May 26, 2004). "Low Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions." ASME. J. Electron. Packag. September 2005; 127(3): 237–244. https://doi.org/10.1115/1.1871192
Download citation file:
Get Email Alerts
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Related Articles
Isothermal Cyclic Bend Fatigue Test Method for Lead-Free Solder Joints
J. Electron. Packag (December,2007)
A Global–Local Approach for Mechanical Deformation and Fatigue
Durability of Microelectronic Packaging Systems
J. Electron. Packag (June,2007)
Phase Structure and Cyclic Deformation in Eutectic Tin-Lead Alloy: A Numerical Analysis
J. Electron. Packag (March,2001)
Effects of Cycling Parameters on the Thermal Fatigue Life of Mixed SnAgCu/SnPb Solder Joints
J. Electron. Packag (June,2011)
Related Proceedings Papers
Related Chapters
Understanding the Problem
Design and Application of the Worm Gear
Cyclic Deformation and Failure of Polymers
Cyclic Stress-Strain Behavior—Analysis, Experimentation, and Failure Prediction
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading