Open-cell aluminum foams were investigated using water to determine their hydraulic characteristics. Maximum fluid flow velocities achieved were 1.042 m/s. The permeability and form coefficient varied from and 8701 to and 120 respectively. It was determined that the flowrate range influenced these calculated parameters, especially in the transitional regime where the permeability based Reynolds number varied between unity and 26.5. Beyond the transition regime where the permeability and form coefficient monotonically approached values which were reported as being calculated at the maximum flow velocities attained. The results obtained in this study are relevant to engineering applications employing metal foams ranging from convection heat sinks to filters and flow straightening devices.
The Effects of Compression and Pore Size Variations on the Liquid Flow Characteristics in Metal Foams
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division January 29, 2001; revised manuscript received August 24, 2001. Associate Editor: P. W. Bearman.
- Views Icon Views
- Share Icon Share
- Search Site
Boomsma, K., and Poulikakos, D. (August 24, 2001). "The Effects of Compression and Pore Size Variations on the Liquid Flow Characteristics in Metal Foams ." ASME. J. Fluids Eng. March 2002; 124(1): 263–272. https://doi.org/10.1115/1.1429637
Download citation file: