Skip Nav Destination
Issues
July 1983
This article was originally published in
Journal of Engineering for Power
ISSN 0022-0825
In this Issue
Research Papers
A Theory for Boundary Layer Growth on the Blades of a Radial Impeller Including Endwall Influence
J. Eng. Power. July 1983, 105(3): 403–411.
doi: https://doi.org/10.1115/1.3227429
Manufacturing Methods for Erosion-Resistant Ceramic Nozzles for Small Gas Turbines
J. Eng. Power. July 1983, 105(3): 412–416.
doi: https://doi.org/10.1115/1.3227430
Topics:
Ceramics
,
Erosion
,
Gas turbines
,
Manufacturing
,
Nozzles
,
Metals
,
Corrosion
,
Engines
,
Thermal shock
,
Tooling
Transonic Compressor Development for Large Industrial Gas Turbines
J. Eng. Power. July 1983, 105(3): 417–421.
doi: https://doi.org/10.1115/1.3227431
Topics:
Compressors
,
Industrial gases
,
Turbines
,
Gas turbines
,
Pressure
,
Design
,
Flow (Dynamics)
,
Cycles
,
Mach number
,
Rotors
A Three-Dimensional Turbulent Flow Analysis Method for the Rotating Channels of a Centrifugal Turbomachine
J. Eng. Power. July 1983, 105(3): 422–429.
doi: https://doi.org/10.1115/1.3227432
Topics:
Turbomachinery
,
Turbulence
,
Flow (Dynamics)
,
Impellers
,
Numerical analysis
Effect of Using Emulsions of High Nitrogen Containing Fuels and Water in a Gas Turbine Combustor on NOx and Other Emissions
J. Eng. Power. July 1983, 105(3): 430–437.
doi: https://doi.org/10.1115/1.3227433
Topics:
Combustion chambers
,
Emissions
,
Emulsions
,
Fuels
,
Gas turbines
,
Nitrogen
,
Nitrogen oxides
,
Water
,
Coal
,
Underground injection
The Gas Turbine Heat Exchanger in the Fluidized Bed Combustor
J. Eng. Power. July 1983, 105(3): 438–445.
doi: https://doi.org/10.1115/1.3227434
Topics:
Combustion chambers
,
Fluidized beds
,
Gas turbines
,
Heat exchangers
,
Coal
,
Oxygen
,
Pressure
,
Design
,
Closed-cycle gas turbines
,
Combined heat and power
Materials Selection for Metallic Heat Exchangers in Advanced Coal-Fired Heaters
J. Eng. Power. July 1983, 105(3): 446–451.
doi: https://doi.org/10.1115/1.3227435
Topics:
Coal
,
Heat exchangers
,
Alloys
,
Combustion chambers
,
Corrosion
,
Fluidized beds
,
Fluids
,
Nickel
,
Cladding systems (Building)
,
Closed-cycle gas turbines
A Theoretical Investigation of Transonic Flows in Radial Compressor Diffusers
J. Eng. Power. July 1983, 105(3): 452–456.
doi: https://doi.org/10.1115/1.3227436
Topics:
Compressors
,
Diffusers
,
Transonic flow
,
Flow (Dynamics)
,
Boundary layers
,
Pressure
,
Blades
,
High pressure (Physics)
,
Shock (Mechanics)
Effect of Impeller-Extended Shrouds on Centrifugal Compressor Performance as a Function of Specific Speed
J. Eng. Power. July 1983, 105(3): 457–465.
doi: https://doi.org/10.1115/1.3227437
Topics:
Compressors
,
Impellers
,
Blades
,
Vaneless diffusers
,
Compression
,
Flow (Dynamics)
,
Pressure
The Design and Testing of Air-Cooled Blading for an Industrial Gas Turbine
J. Eng. Power. July 1983, 105(3): 466–473.
doi: https://doi.org/10.1115/1.3227438
Topics:
Design
,
Industrial gases
,
Testing
,
Turbines
,
Engines
,
Blades
,
Cooling
,
Gas turbines
,
High pressure (Physics)
,
Instrumentation
The Calculation of Deviation Angle in Axial-Flow Compressor Cascades
J. Eng. Power. July 1983, 105(3): 474–479.
doi: https://doi.org/10.1115/1.3227439
Topics:
Axial flow
,
Compressors
,
Vorticity
,
Turbulence
,
Algebra
,
Blades
,
Cascades (Fluid dynamics)
,
Chords (Trusses)
,
Differential equations
,
Eddies (Fluid dynamics)
Transient Vibration of High-Speed, Lightweight Rotors Due to Sudden Imbalance
J. Eng. Power. July 1983, 105(3): 480–486.
doi: https://doi.org/10.1115/1.3227440
Topics:
Rotors
,
Transients (Dynamics)
,
Vibration
,
Blades
,
Disks
,
Equations of motion
,
Machinery
,
Rotordynamics
,
Vibration analysis
Optimal Design of Squeeze Film Supports for Flexible Rotors
J. Eng. Power. July 1983, 105(3): 487–494.
doi: https://doi.org/10.1115/1.3227441
Topics:
Design
,
Rotors
,
Vibration
,
Bearings
,
Computation
,
Lubricants
,
Lubrication
,
Pressure
,
Rotor vibration
Experimental Evaluation of Squeeze Film Supported Flexible Rotors
J. Eng. Power. July 1983, 105(3): 495–503.
doi: https://doi.org/10.1115/1.3227442
Topics:
Rotors
,
Errors
,
Lubricants
,
Uncertainty
,
Vibration
,
Viscosity
Unconditionally Stable Calculation of Transonic Potential Flow Through Cascades Using an Adaptive Mesh for Shock Capture
J. Eng. Power. July 1983, 105(3): 504–513.
doi: https://doi.org/10.1115/1.3227443
Topics:
Flow (Dynamics)
,
Shock (Mechanics)
,
Density
,
Compressibility
,
Space
,
Viscosity
An Improved Time-Marching Method for Turbomachinery Flow Calculation
J. Eng. Power. July 1983, 105(3): 514–521.
doi: https://doi.org/10.1115/1.3227444
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Entropy
,
Blades
,
Corners (Structural elements)
,
Errors
,
Shock (Mechanics)
The Control of Engine Vibration Using Squeeze Film Dampers
J. Eng. Power. July 1983, 105(3): 525–529.
doi: https://doi.org/10.1115/1.3227447
Topics:
Dampers
,
Engines
,
Vibration
,
Cavitation
,
Gas turbines
,
Springs
,
Stiffness
,
Vibration isolators
The Elliptic Solution of the Secondary Flow Problem
J. Eng. Power. July 1983, 105(3): 530–535.
doi: https://doi.org/10.1115/1.3227448
Topics:
Flow (Dynamics)
,
Boundary-value problems
,
Ducts
,
Inviscid flow
,
Pressure
,
Vorticity
A Quasi-Three-Dimensional Finite Element Solution for Steady Compressible Flow Through Turbomachines
J. Eng. Power. July 1983, 105(3): 536–542.
doi: https://doi.org/10.1115/1.3227449
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method
J. Eng. Power. July 1983, 105(3): 543–550.
doi: https://doi.org/10.1115/1.3227450
Topics:
Dynamic systems
,
Rotors
,
Bearings
,
Design
Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper
J. Eng. Power. July 1983, 105(3): 551–556.
doi: https://doi.org/10.1115/1.3227451
Topics:
Dampers
,
Rotors
,
Steady state
,
Algebra
,
Bearings
,
Energy consumption
,
Fluids
,
Springs
The Effect of Journal Misalignment on the Oil-Film Forces Generated in a Squeeze Film Damper
J. Eng. Power. July 1983, 105(3): 560–564.
doi: https://doi.org/10.1115/1.3227454
Topics:
Dampers
,
Bearings
,
Clearances (Engineering)
,
Computation
,
Disks
,
Gas turbines
Unsteady Aerodynamics and Gapwise Periodicity of Oscillating Cascaded Airfoils
J. Eng. Power. July 1983, 105(3): 565–574.
doi: https://doi.org/10.1115/1.3227455
Topics:
Aerodynamics
,
Airfoils
,
Blades
,
Cascades (Fluid dynamics)
,
Pressure
,
Chords (Trusses)
,
Damping
,
Stability
,
Stress
,
Unsteady flow
Aerodynamic Damping Measurements in a Transonic Compressor
J. Eng. Power. July 1983, 105(3): 575–584.
doi: https://doi.org/10.1115/1.3227456
Topics:
Compressors
,
Damping
,
Blades
,
Disks
,
Structural dynamics
,
Dimensional analysis
,
Equations of motion
,
Rotors
,
Shock (Mechanics)
,
Test facilities
In-Plane Inertial Coupling in Tuned and Severely Mistuned Bladed Disks
J. Eng. Power. July 1983, 105(3): 585–590.
doi: https://doi.org/10.1115/1.3227457
Topics:
Disks
,
Blades
,
Rotors
,
Cantilevers
,
Compressors
,
Resonance
An Improved Method for Calculating Critical Speeds and Rotordynamic Stability of Turbomachinery
J. Eng. Power. July 1983, 105(3): 591–595.
doi: https://doi.org/10.1115/1.3227458
Topics:
Stability
,
Turbomachinery
,
Bearings
,
Damping
,
Polynomials
,
Rotors
,
Computer software
,
Modeling
Comparison of Two- and Three-Dimensional Flow Computations With Laser Anemometer Measurements in a Transonic Compressor Rotor
J. Eng. Power. July 1983, 105(3): 596–605.
doi: https://doi.org/10.1115/1.3227459
Topics:
Compressors
,
Computation
,
Flow (Dynamics)
,
Lasers
,
Rotors
,
Blades
,
Design
,
Mach number
,
Pressure
,
Waves
Nonlinear Analysis of Rotor-Bearing Systems Using Component Mode Synthesis
J. Eng. Power. July 1983, 105(3): 606–614.
doi: https://doi.org/10.1115/1.3227460
Topics:
Bearings
,
Rotors
,
Blades
,
Computer software
,
Dampers
,
Dynamics (Mechanics)
,
Nonlinear systems
,
Shock (Mechanics)
,
Simulation
,
Stress
The Effect of Temperature Ratios on the Film Cooling Process
J. Eng. Power. July 1983, 105(3): 615–620.
doi: https://doi.org/10.1115/1.3227461
Topics:
Film cooling
,
Temperature
,
Heat transfer
,
Wall temperature
,
Gas turbines
,
Wind tunnels
RACER Conceptual Design
J. Eng. Power. July 1983, 105(3): 621–626.
doi: https://doi.org/10.1115/1.3227462
Topics:
Conceptual design
,
Design
,
Energy recovery
,
Exhaust systems
,
Fuels
,
Gas turbines
,
Heat recovery
,
Horsepower
,
Navy
,
Propulsion
Investigation of F/A-18A Engine Throttle Usage and Parametric Sensitivities
J. Eng. Power. July 1983, 105(3): 627–634.
doi: https://doi.org/10.1115/1.3227463
Topics:
Engines
,
Aircraft
,
Cycles
,
Flight
,
Design
,
Durability
,
Composite materials
,
Navy
,
Rivers
,
Simulation models
The Feasibility of Water Injection Into the Turbine Coolant to Permit Gas Turbine Contingency Power for Helicopter Application
J. Eng. Power. July 1983, 105(3): 635–642.
doi: https://doi.org/10.1115/1.3227464
Topics:
Coolants
,
Gas turbines
,
Turbines
,
Underground injection
,
Engines
,
Temperature
,
Rupture
,
Stress
,
Water
,
Cooling
Inertia Effects on the Dynamics of a Disk Levitated by Incompressible Laminar Fluid Flow
J. Eng. Power. July 1983, 105(3): 643–653.
doi: https://doi.org/10.1115/1.3227465
Topics:
Disks
,
Dynamics (Mechanics)
,
Fluid dynamics
,
Inertia (Mechanics)
,
Flow (Dynamics)
,
Fluids
,
Damping
,
Differential equations
,
Film thickness
,
Flat plates
Vectoring Exhaust Systems for STOL Tactical Aircraft
J. Eng. Power. July 1983, 105(3): 654–662.
doi: https://doi.org/10.1115/1.3227466
Topics:
Aircraft
,
Exhaust systems
,
Nozzles
,
Equilibrium (Physics)
,
Propulsion systems
,
Thrust
F-14 Aircraft and Propulsion Control Integration Evaluation
J. Eng. Power. July 1983, 105(3): 663–668.
doi: https://doi.org/10.1115/1.3227467
Topics:
Aircraft
,
Propulsion
,
Engines
,
Navy
,
Aerospace industry
,
Air flow
,
Atomic force microscopy
,
Control systems
,
Fuel consumption
,
Fuel management
LMFBR Operational and Experimental In-Core, Local-Fault Experience, Primarily With Oxide Fuel Elements
J. Eng. Power. July 1983, 105(3): 669–678.
doi: https://doi.org/10.1115/1.3227468
Topics:
Fuels
,
Liquid metal fast breeder reactors
,
Failure
,
Neutrons
,
Nuclear fission
,
Signals
,
Sodium
,
Thermal reactors
The LMFBR Fuel-Design Environment for Endurance Testing, Primarily of Oxide Fuel Elements With Local Faults
J. Eng. Power. July 1983, 105(3): 679–689.
doi: https://doi.org/10.1115/1.3227469
Topics:
Design
,
Fuels
,
Liquid metal fast breeder reactors
,
Testing
,
Failure
,
Neutrons
,
Nuclear fission
Design Concept and Development of a Heavy-Duty Truck Diesel Engine for Better Fuel Economy
J. Eng. Power. July 1983, 105(3): 690–696.
doi: https://doi.org/10.1115/1.3227470
Topics:
Corporate average fuel economy
,
Design
,
Diesel engines
,
Fuel efficiency
,
Trucks
,
Engines
,
Fuels
,
Torque
,
Brakes
,
Combustion
Some Aspects of Constant Pressure Turbocharged Marine Diesel Engines of Medium and Low Speed
J. Eng. Power. July 1983, 105(3): 697–711.
doi: https://doi.org/10.1115/1.3227471
Topics:
Diesel engines
,
Pressure
,
Thermal efficiency
,
Unsteady flow
,
Differential equations
,
Engines
,
Exhaust systems
,
Fluctuations (Physics)
,
Resonance
,
Simulation
Discussions
Discussion: “An Improved Time-Marching Method for Turbomachinery Flow Calculation” (Denton, J. D., 1983, ASME J. Eng. Power, 105, pp. 514–521)
J. Eng. Power. July 1983, 105(3): 521–523.
doi: https://doi.org/10.1115/1.3227445
Topics:
Flow (Dynamics)
,
Turbomachinery
Closure to “Discussion of ‘An Improved Time-Marching Method for Turbomachinery Flow Calculation’” (1983, ASME J. Eng. Power, 105, pp. 521–523)
J. Eng. Power. July 1983, 105(3): 523–524.
doi: https://doi.org/10.1115/1.3227446
Topics:
Flow (Dynamics)
,
Turbomachinery
Discussion: “Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper” (Taylor, D. L., and Kumar, B. R. K., 1983, ASME J. Eng. Power, 105, pp. 551–556)
J. Eng. Power. July 1983, 105(3): 556–558.
doi: https://doi.org/10.1115/1.3227452
Topics:
Dampers
,
Rotors
,
Steady state
Closure to “Discussion of ‘Closed-Form, Steady-State Solution for the Unbalance Response of a Rigid Rotor in Squeeze Film Damper’” (1983, ASME J. Eng. Power, 105, pp. 556–558)
J. Eng. Power. July 1983, 105(3): 558–559.
doi: https://doi.org/10.1115/1.3227453
Topics:
Rotors
,
Steady state
Email alerts
RSS Feeds
In-Situ Species Concentration Measurements In Ammonia-Mix Flames Using Ftir Spectroscopy
J. Eng. Gas Turbines Power
Temperature Dependence of Aerated Turbine Lubricating Oil Degradation from a Lab-Scale Test Rig
J. Eng. Gas Turbines Power
Multi-Disciplinary Surrogate-Based Optimization of a Compressor Rotor Blade Considering Ice Impact
J. Eng. Gas Turbines Power
Experimental Investigations on Carbon Segmented Seals With Smooth and Pocketed Pads
J. Eng. Gas Turbines Power