... module. This assessment required measurements be taken within the engine, during operation up to maximum power, using rotor mounted thermocouples and strain gauges. The acquisition of this data necessitated the use of a telemetry system that could be integrated into the existing engine architecture...

.... An electric motor drives the hollow shaft using a spline coupling connection. A mechanical loading device provides static loads on test GFB upward via a metal wire, and a strain gauge type load cell placed in the middle of the wire indicates the applied loads. During experiments for shaft speeds of 5 krpm, 10...

...Sunil K. Sinha; Kevin E. Turner; Nitesh Jain In the present paper, a hydrodynamic bird material model made up of water and air mixture is developed, which produces good correlation with the measured strain-gauge test data in a panel test. This parametric bird projectile model is used to generate...

... elements of the probe are two piezoresistive pressure transducers that are used to measure the unsteady pressure and unsteady velocity field, as well as the steady temperature. Additional temperature and strain gauge sensors are embedded in the shaft to allow a much higher degree of robustness in the use...

... tools. In this work, measurements of blade surface pressure and aerodynamic work distribution were addressed. A series of pressure sensors were designed and installed on rotating impeller blades and simultaneous measurements with blade-mounted strain gauges were performed under engine representative...

...Zachary S. Zutavern; Dara W. Childs A method is presented for parameter identification of an annular gas seal on a flexible-rotor test rig. Dynamic loads are applied by magnetic bearings (MBs) that support the rotor. MB forces are measured using fiber-optic strain gauges that are bonded...

... Technical Editor: D. Wisler. 07 June 1999 09 March 1999 03 January 2000 vibration measurement gas turbines testing acoustic resonance strain gauges Rotating blade vibration measurements are a key part of any turbomachinery research and development program. Contacting...