High temperature thermosyphons are devices designed to operate at temperatures above . They can be applied in many industrial applications, including heat recovery from high temperature air fluxes. After a short literature review, which shows a deficiency of models for liquid metal thermosyphons, an analytical model, developed to predict the temperature distribution and the overall thermal resistance, is shown. In this model, the thermosyphon is divided into seven regions: three regions for the condensed liquid, including the condenser, adiabatic region, and evaporator; one region for vapor; one for the liquid pool; one for the noncondensable gases; and another for the tube wall. The condensation phenomenon is modeled according to the Nusselt theory for condensation in vertical walls. Numerical methods are used to solve the resulting equations and to determine the temperature distribution in the tube wall. Ideal gas law is applied for the noncondensable gases inside the thermosyphon, while the evaporator and condenser heat transfer coefficients are obtained from literature correlations. Experimental tests are conducted for thermosyphon with mercury as working fluid, designed and constructed in the laboratory. The results for two thermosyphons with different geometry configurations are tested: one made of a finned tube in the condenser region and another of a smooth tube. The finned tube presents lower wall temperature levels when compared with the smooth tube. The experimental data are compared with the proposed model for two different liquid pool heat transfer coefficients. It is observed that the comparison between the experimental data and theoretical temperature profiles is good for the condenser region. For the evaporator, where two distinct regions are observed (liquid film and pool), the comparison is not so good, independent of the heat transfer coefficient used. In a general sense, the model has proved to be a useful tool for the design of liquid metal thermosyphons.
Skip Nav Destination
Article navigation
September 2009
This article was originally published in
Journal of Heat Transfer
Research Papers
Analytical and Experimental Analysis of a High Temperature Mercury Thermosyphon
André Felippe Vieira da Cunha,
André Felippe Vieira da Cunha
Assistant Researcher
Department of Mechanical Engineering, Heat Pipe Laboratory (LABTUCAL),
Federal University of Santa Catarina
, Florianópolis, SC 88040-970, Brazil
Search for other works by this author on:
Marcia B. H. Mantelli
Marcia B. H. Mantelli
Professor
Department of Mechanical Engineering, Heat Pipe Laboratory (LABTUCAL),
Federal University of Santa Catarina
, Florianópolis, SC 88040-970, Brazil
Search for other works by this author on:
André Felippe Vieira da Cunha
Assistant Researcher
Department of Mechanical Engineering, Heat Pipe Laboratory (LABTUCAL),
Federal University of Santa Catarina
, Florianópolis, SC 88040-970, Brazil
Marcia B. H. Mantelli
Professor
Department of Mechanical Engineering, Heat Pipe Laboratory (LABTUCAL),
Federal University of Santa Catarina
, Florianópolis, SC 88040-970, BrazilJ. Heat Transfer. Sep 2009, 131(9): 092901 (7 pages)
Published Online: June 22, 2009
Article history
Received:
April 24, 2008
Revised:
January 29, 2009
Published:
June 22, 2009
Citation
Vieira da Cunha, A. F., and Mantelli, M. B. H. (June 22, 2009). "Analytical and Experimental Analysis of a High Temperature Mercury Thermosyphon." ASME. J. Heat Transfer. September 2009; 131(9): 092901. https://doi.org/10.1115/1.3089551
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Heat Transfer Performance of a Glass Thermosyphon Using Graphene–Acetone Nanofluid
J. Heat Transfer (November,2015)
Temperature Response of Heat Transport in a Micro Heat Pipe
J. Heat Transfer (May,1999)
Experimental Investigation of a Flat-Plate Oscillating Heat Pipe With Groove-Enhanced Minichannels
J. Thermal Sci. Eng. Appl (December,2020)
Heat Transport Capability and Fluid Flow Neutron Radiography of Three-Dimensional Oscillating Heat Pipes
J. Heat Transfer (June,2010)
Related Proceedings Papers
Related Chapters
The Special Characteristics of Closed-Cycle Gas Turbines
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Scope of Section I, Organization, and Service Limits
Power Boilers: A Guide to the Section I of the ASME Boiler and Pressure Vessel Code, Second Edition