Template-based chemical vapor deposition (TB-CVD) is a versatile technique for manufacturing carbon nanotubes (CNTs) or CNT-based devices for various applications. In this process, carbon is deposited by thermal decomposition of a carbon-based precursor gas inside the nanoscopic cylindrical pores of anodized aluminum oxide (AAO) templates to form CNTs. Experimental results show that CNT formation in templates is controlled by TB-CVD process parameters, such as time, temperature, and flow rate. However, optimization of this process is done empirically, requiring tremendous time and effort. Moreover, there is a need for a more comprehensive and low cost way to characterize the flow in the furnace in order to understand how process parameters may affect CNT formation. In this report, we describe the development of four, 3D numerical models (73 < Re < 1100), each varying in complexity, to elucidate the thermofluid behavior in the TB-CVD process. Using computational fluid dynamic (CFD) commercial codes, the four models are compared to determine how the presence of the template and boat, composition of the precursor gas, and consumption of species at the template surface affect the temperature profiles, velocity fields, mixed convection, and strength of circulations in the system. The benefits and shortcomings of each model, as well as a comparison of model accuracy and computational time, are presented. Due to limited data, simulation results are validated by experiments and visual observations of the flow structure whenever possible. Decent agreement between experimental data and simulation supports the reliability of the simulation.
Issue Section:
Heat Transfer in Manufacturing
Keywords:
Thermal systems
References
1.
Weihua
, H.
, Shen
, H. U.
, Daiwen
, P.
, Zongli
, W.
, and Jieke
, C.
, 2000
, “Monitoring the Secretion From Single Cells With Temporal and Spatial Resolution, Monitoring the Secretion From Single Cells With Temporal and Spatial Resolution
,” Chin. Sci. Bull.
, 45
(4
), pp. 289
–295
.2.
Santra
, T. S.
, and Tseng
, F. G.
, 2014
, “Micro/Nanofluidic Devices for Single Cell Analysis
,” Micromachines
, 5
(2
), pp. 154
–157
.3.
Schrlau
, M. G.
, and Bau
, H. H.
, 2009
, “Carbon-Based Nanoprobes for Cell Biology
,” Microfluid. Nanofluid.
, 7
(4
), pp. 439
–450
.4.
Schrlau
, M. G.
, Brailoiu
, E.
, Patel
, S.
, Gogotsi
, Y.
, Dun
, N. J.
, and Bau
, H. H.
, 2008
, “Carbon Nanopipettes Characterize Calcium Release Pathways in Breast Cancer Cells
,” Nanotechnology
, 19
(32
), p. 325102
.5.
Schrlau
, M. G.
, Falls
, E. M.
, Ziober
, B. L.
, and Bau
, H. H.
, 2008
, “Carbon Nanopipettes for Cell Probes and Intracellular Injection
,” Nanotechnology
, 19
(1
), p. 015101
.6.
Niu
, J. J.
, Schrlau
, M. G.
, Friedman
, G.
, and Gogotsi
, Y.
, 2011
, “Carbon Nanotube-Tipped Endoscope for In Situ Intracellular Surface-Enhanced Raman Spectroscopy
,” Small
, 7
(4
), pp. 540
–545
.7.
Schrlau
, M. G.
, Dun
, N. J.
, and Bau
, H. H.
, 2009
, “Cell Electrophysiology With Carbon Nanopipettes
,” ACS Nano
, 3
(3
), pp. 563
–568
.8.
Singhal
, R.
, Orynbayeva
, Z.
, Kalyana Sundaram
, R. V.
, Niu
, J. J.
, Bhattacharyya
, S.
, Vitol
, E. A.
, Schrlau
, M. G.
, Papazoglou
, E. S.
, Friedman
, G.
, and Gogotsi
, Y.
, 2011
, “Multifunctional Carbon-Nanotube Cellular Endoscopes
,” Nat. Nanotechnol.
, 6
(1
), pp. 57
–64
.9.
Orynbayeva
, Z.
, Singhal
, R.
, Vitol
, E. A.
, Schrlau
, M. G.
, Papazoglou
, E.
, Friedman
, G.
, and Gogotsi
, Y.
, 2012
, “Physiological Validation of Cell Health Upon Probing With Carbon Nanotube Endoscope and Its Benefit for Single-Cell Interrogation
,” Nanomed. Nanotechnol. Biol. Med.
, 8
(5
), pp. 590
–598
.10.
Choy
, K. L.
, 2003
, “Chemical Vapour Deposition of Coatings
,” Prog. Mater. Sci.
, 48
(2
), pp. 57
–170
.11.
Martin
, C. R.
, 1994
, “Nanomaterials: A Membrane-Based Synthetic Approach
,” Science
, 266
(5193
), pp. 1961
–1966
.12.
Kyotani
, T.
, Tsai
, L.
, and Tomita
, A.
, 1995
, “Formation of Ultrafine Carbon Tubes by Using an Anodic Aluminum Oxide Film as a Template
,” Chem. Mater.
, 7
(8
), pp. 1427
–1428
.13.
Kyotani
, T.
, Tsai
, L.
, and Tomita
, A.
, 1996
, “Preparation of Ultrafine Carbon Tubes in Nanochannels of an Anodic Aluminum Oxide Film
,” Chem. Mater.
, 8
(8
), pp. 2109
–2113
.14.
Che
, G.
, Lakshmi
, B. B.
, Fisher
, E. R.
, and Martin
, C. R.
, 1998
, “Carbon Nanotubule Membranes for Electrochemical Energy Storage and Production
,” Nature
, 393
(6683
), pp. 346
–349
.15.
Golshadi
, M.
, and Schrlau
, M. G.
, 2013
, “Template-Based Synthesis of Aligned Carbon Nanotube Arrays for Microfluidic and Nanofluidic Applications
,” ECS Trans.
, 50
(33
), pp. 1
–14
.16.
Vitol
, E. A.
, Schrlau
, M. G.
, Bhattacharyya
, S.
, Ducheyne
, P.
, Bau
, H. H.
, Friedman
, G.
, and Gogotsi
, Y.
, 2009
, “Effects of Deposition Conditions on the Structure and Chemical Properties of Carbon Nanopipettes
,” Chem. Vap. Deposition
, 15
(7–9
), pp. 204
–208
.17.
Golshadi
, M.
, Maita
, J.
, Lanza
, D.
, Zeiger
, M.
, Presser
, V.
, and Schrlau
, M. G.
, 2014
, “Effects of Synthesis Parameters on Carbon Nanotubes Manufactured by Template-Based Chemical Vapor Deposition
,” Carbon
, 80
, pp. 28
–39
.18.
Kuwana
, K.
, Endo
, H.
, Saito
, K.
, Qian
, D.
, Andrews
, R.
, and Grulke
, E. A.
, 2005
, “Catalyst Deactivation in CVD Synthesis of Carbon Nanotubes
,” Carbon
, 43
(2
), pp. 253
–260
.19.
Endo
, H.
, Kuwana
, K.
, Saito
, K.
, Qian
, D.
, Andrews
, R.
, and Grulke
, E. A.
, 2004
, “CFD Prediction of Carbon Nanotube Production Rate in a CVD Reactor
,” Chem. Phys. Lett.
, 387
(4–6
), pp. 307
–311
.20.
Ibrahim
, J.
, and Paolucci
, S.
, 2011
, “Transient Solution of Chemical Vapor Infiltration/Deposition in a Reactor
,” Carbon
, 49
(3
), pp. 915
–930
.21.
Mishra
, P.
, and Verma
, N.
, 2012
, “A CFD Study on a Vertical Chemical Vapor Deposition Reactor for Growing Carbon Nanofibers
,” Chem. Eng. Res. Des.
, 90
(12
), pp. 2293
–2301
.22.
Kuwana
, K.
, Li
, T.
, and Saito
, K.
, 2006
, “Gas-Phase Reactions During CVD Synthesis of Carbon Nanotubes: Insights Via Numerical Experiments
,” Chem. Eng. Sci.
, 61
(20
), pp. 6718
–6726
.23.
Cheng
, W. T.
, Li
, H. C.
, and Huang
, C. N.
, 2008
, “Simulation and Optimization of Silicon Thermal CVD Through CFD Integrating Taguchi Method
,” Chem. Eng. J.
, 137
(3
), pp. 603
–613
.24.
Evans
, G.
, and Greif
, R.
, 1993
, “Thermally Unstable Convection With Applications to Chemical Vapor Deposition Channel Reactors
,” Int. J. Heat Mass Transfer
, 36
(11
), pp. 2769
–2781
.25.
Spall
, R. E.
, 1996
, “Observations of Spanwise Symmetry Breaking for Unsteady Mixed Convection in Horizontal Ducts
,” ASME J. Heat Transfer
, 118
(4
), pp. 885
–888
.26.
Tuh
, J. L.
, and Lin
, T. F.
, 2003
, “Visualization of Return Flow Structure in Mixed Convection of Gas Over a Heated Circular Plate in a Horizontal Flat Duct
,” J. Cryst. Growth
, 257
(1–2
), pp. 199
–211
.27.
Nicolas
, X.
, 2002
, “Revue Bibliographique Sur Les écoulements de Poiseuille–Rayleigh–Bénard : écoulements de Convection Mixte en Conduites Rectangulaires Horizontales Chauffées par le Bas
,” Int. J. Therm. Sci.
, 41
(10
), pp. 961
–1016
.28.
Kelly
, R. E.
, 1994
, “The Onset and Development of Thermal Convection in Fully Developed Shear Flows
,” Advances in Applied Mechanics
, J. W. H. and T. Y.
Wu
, eds., Elsevier
, Cambridge, MA
, pp. 35
–112
.29.
Nicolas
, X.
, Benzaoui
, A.
, and Xin
, S.
, 2008
, “Numerical Simulation of Thermoconvective Flows and More Uniform Depositions in a Cold Wall Rectangular APCVD Reactor
,” J. Cryst. Growth
, 310
(1
), pp. 174
–186
.30.
Wang
, Q.
, Yoo
, H.
, and Jaluria
, Y.
, 2003
, “Convection in a Horizontal Rectangular Duct Under Constant and Variable Property Formulations
,” Int. J. Heat Mass Transfer
, 46
(2
), pp. 297
–310
.31.
Cheng
, T. S.
, and Hsiao
, M. C.
, 2008
, “Numerical Investigations of Geometric Effects on Flow and Thermal Fields in a Horizontal CVD Reactor
,” J. Cryst. Growth
, 310
(12
), pp. 3097
–3106
.32.
Chiu
, W. K. S.
, Richards
, C. J.
, and Jaluria
, Y.
, 2000
, “Flow Structure and Heat Transfer in a Horizontal Converging Channel Heated From Below
,” Phys. Fluids
, 12
(8
), pp. 2128
–2136
.33.
Fotiadis
, D. I.
, and Jensen
, K. F.
, 1990
, “Thermophoresis of Solid Particles in Horizontal Chemical Vapor Deposition Reactors
,” J. Cryst. Growth
, 102
(4
), pp. 743
–761
.34.
Visser
, E. P.
, Kleijn
, C. R.
, Govers
, C. A. M.
, Hoogendoorn
, C. J.
, and Giling
, L. J.
, 1989
, “Return Flows in Horizontal MOCVD Reactors Studied With the Use of TiO2 Particle Injection and Numerical Calculations
,” J. Cryst. Growth
, 94
(4
), pp. 929
–946
.35.
Karki
, K. C.
, Sathyamurthy
, P. S.
, and Patankar
, S. V.
, 1993
, “Three-Dimensional Mixed Convection in a Horizontal Chemical Vapor Deposition Reactor
,” ASME J. Heat Transfer
, 115
(3
), pp. 803
–806
.36.
Kleijn
, C. R.
, and Hoogendoorn
, C. J.
, 1991
, “A Study of 2- and 3-D Transport Phenomena in Horizontal Chemical Vapor Deposition Reactors
,” Chem. Eng. Sci.
, 46
(1
), pp. 321
–334
.37.
Danckwerts
, P. V.
, and Lannus
, A.
, 1970
, “Gas-Liquid Reactions
,” J. Electrochem. Soc.
, 117
(10
)(10
(10
)), pp. 369C
–370C
.38.
Levenspiel
, O.
, 1999
, “Chemical Reaction Engineering
,” Ind. Eng. Chem. Res.
, 38
(11
), pp. 4140
–4143
.39.
A.
Lautenschleger
, and Olenberg
, A.
, 2015
, “A Systematic CFD-Based Method to Investigate and Optimise Novel Structured Packings
,” Chem. Eng. Sci.
, 122
, pp. 452
–464
.40.
Vahedein
, Y. S.
, and Schrlau
, M. G.
, 2015
, “Numerical Model of Template-Based Chemical Vapor Deposition Processes to Manufacture Carbon Nanotubes for Biological Devices
,” ASME
Paper No. ICNMM2015-48520, p. V001T03A005.41.
Giling
, L. J.
, 1982
, “Gas Flow Patterns in Horizontal Epitaxial Reactor Cells Observed by Interference Holography
,” J. Electrochem. Soc.
, 129
(3
), pp. 634
–644
.42.
Rogers
, G. F. C.
, and Mayhew
, Y. R.
, 1994
, Thermodynamic and Transport Properties of Fluids
, Wiley-Blackwell
, Oxford, UK
.43.
Patankar
, S. V.
, Ramadhyani
, S.
, and Sparrow
, E. M.
, 1978
, “Effect of Circumferentially Nonuniform Heating on Laminar Combined Convection in a Horizontal Tube
,” ASME J. Heat Transfer
, 100
(1
), pp. 63
–70
.44.
Shannon
, R. L.
, and Depew
, C. A.
, 1968
, “Combined Free and Forced Laminar Convection in a Horizontal Tube With Uniform Heat Flux
,” ASME J. Heat Transfer
, 90
(3
), pp. 353
–357
.45.
Choudhury
, D.
, and Patankar
, S. V.
, 1988
, “Combined Forced and Free Laminar Convection in the Entrance Region of an Inclined Isothermal Tube
,” ASME J. Heat Transfer
, 110
(4a
), pp. 901
–909
.46.
Bergles
, A. E.
, and Simonds
, R. R.
, 1971
, “Combined Forced and Free Convection for Laminar Flow in Horizontal Tubes With Uniform Heat Flux
,” Int. J. Heat Mass Transfer
, 14
(12
), pp. 1989
–2000
.47.
Newell
, P. H.
, and Bergles
, A. E.
, 1970
, “Analysis of Combined Free and Forced Convection for Fully Developed Laminar Flow in Horizontal Tubes
,” ASME J. Heat Transfer
, 92
(1
), pp. 83
–93
.48.
Chapman
, S.
, and Cowling
, T. G.
, 1970
, The Mathematical Theory of Non-Uniform Gases: An Account of the Kinetic Theory of Viscosity, Thermal Conduction and Diffusion in Gases
, 3rd ed., Cambridge University Press, London
.49.
Jones
, J. E.
, 1924
, “On the Determination of Molecular Fields. II. From the Equation of State of a Gas
,” Proc. R. Soc. A
, 106
(738
), pp. 463
–477
.50.
Haar
, D. T.
, 1954
, “Molecular Theory of Gases and Liquids. Joseph O. Hirschfelder, Charles F. Curtiss, and R. Byron Bird. Wiley, New York; Chapman & Hall, London, 1954
,” Science
, 120
(3131
), pp. 1097
–1097
.51.
Guermond
, J. L.
, Minev
, P.
, and Shen
, J.
, 2006
, “An Overview of Projection Methods for Incompressible Flows
,” Comput. Methods Appl. Mech. Eng.
, 195
(44–47
), pp. 6011
–6045
.52.
Rhie
, C. M.
, and Chow
, W. L.
, 1983
, “Numerical Study of the Turbulent Flow Past an Airfoil With Trailing Edge Separation
,” AIAA J.
, 21
(11
), pp. 1525
–1532
.53.
Guillén
, I.
, and Treviño
, C.
, 2014
, “Unsteady Laminar Mixed Convection Heat Transfer From a Horizontal Isothermal Cylinder in Contra-Flow: Buoyancy and Wall Proximity Effects on the Flow Response and Wake Structure
,” Exp. Therm. Fluid Sci.
, 52
, pp. 30
–46
.54.
Ingham
, D. D. B.
, and Merkin
, D. J. H.
, 1981
, “Unsteady Mixed Convection From an Isothermal Circular Cylinder
,” Acta Mech.
, 38
(1–2
), pp. 55
–69
.55.
Jain
, P. C.
, and Lohar
, B. L.
, 1979
, “Unsteady Mixed Convection Heat Transfer From a Horizontal Circular Cylinder
,” ASME J. Heat Transfer
, 101
(1
), pp. 126
–131
.56.
Lax
, P. D.
, and Richtmyer
, R. D.
, 1956
, “Survey of the Stability of Linear Finite Difference Equations
,” Commun. Pure Appl. Math.
, 9
(2
), pp. 267
–293
.57.
Jensen
, K. F.
, and Einset
, E. O.
, 1991
, “Flow Phenomena in Chemical Vapor Deposition of Thin Films
,” Annu. Rev. Fluid Mech.
, 23
(1
), pp. 197
–232
.58.
Sornek
, R. J.
, Dobashi
, R.
, and Hirano
, T.
, 2000
, “Effect of Turbulence on Vaporization, Mixing, and Combustion of Liquid-Fuel Sprays
,” Combust. Flame
, 120
(4
), pp. 479
–491
.59.
Cho
, W.
, Schulz
, M.
, and Shanov
, V.
, 2013
, Kinetics of Growing Centimeter Long Carbon Nanotube Arrays, Syntheses and Applications of Carbon Nanotubes and Their Composites, S.
Suzuki
, ed., InTech
, Rijeka, Croatia
.60.
Chase
, M. W.
, 1997
, “Constants of Inorganic Substances. A Handbook. Revised and Augmented Edition. By R. A. Lidin, L. L. Andreeva, and V. A. Molochko. Begell House, Inc.: New York. 1996. 444 pp., ISBN 1-56700-014-X
,” J. Chem. Eng. Data
, 42
(1
), pp. 223
–224
.Copyright © 2016 by ASME
You do not currently have access to this content.
