... by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received December 17, 2017; final manuscript received July 24, 2018; published online August 28, 2018. Assoc. Editor: Zhixiong Guo. 17 12 2017 24 07 2018 Elasticity Heat transfer...

... in the SLM process. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received October 17, 2017; final manuscript received May 6, 2018; published online June 29, 2018. Assoc. Editor: Ali Khounsary. 17...

... of both algorithms are presented and discussed. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received September 18, 2016; final manuscript received April 9, 2018; published online June 7, 2018. Assoc...

... point to produce a substantial amount of lithium vapor pressure. The vapor expands through the hot nozzle, by itself or accompanied by inert carrier gas (Ar), producing an intense and directional beam of particles or clusters [ 7 ]. Heat transfer Melting Melting Thermal stress...

... are presented through graphs. Additionally, the numerical values of friction factor and heat transfer rate are tabulated numerically for various physical parameter obtained. We also validated the present results with previous published study and found to be highly satisfactory. The formulated model...

...Lin Liu; Liancun Zheng; Yanping Chen; Fawang Liu The paper gives a comprehensive study on the space fractional boundary layer flow and heat transfer over a stretching sheet with variable thickness, and the variable magnetic field is applied. Novel governing equations with left and right Riemann...

... and the metallurgical features such as grain size and nucleation density are obtained from an exhaustive micrography campaign. The remarkable agreement with the experimental evidence validates the predicting capabilities of the proposed model. Contributed by the Heat Transfer Division of ASME for publication...

.... , 1984 , “ A New Finite Element Model for Welding Heat Sources ,” Metall. Trans. B , 15 ( 2 ), pp. 299 – 305 . 10.1007/BF02667333 [18] Rohsenow , W. M. , Hartnett , J. P. , and Cho , Y. I. , 1998 , Handbook of Heat Transfer , 3rd ed. , McGraw-Hill , New York . [19] Eagar...

... minimum for TiO 2 - water nanofluid. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received January 22, 2017; final manuscript received August 29, 2017; published online January 17, 2018. Assoc. Editor...

... , J. M. H. , 2011 , “ Modeling of Heat Transfer and Reactive Chemistry for Particles in Gas-Solid Flow Utilizing Continuum-Discrete Methodology (CDM) ,” Ph.D. thesis, West Virginia University, Morgantown, WV. [10] Iqbal , N. , and Rauh , C. , 2016 , “ Coupling of Discrete Element Model...

... , J. , 2017 , “ Theoretical Solution of Transient Heat Conduction Problem in One-Dimensional Multilayer Composite Media ,” J. Thermophys. Heat Transfer , 31 ( 2 ), pp. 483 – 488 . 10.2514/1.T4772 [9] van der Tempel , L. , Potze , W. , and Lammers , J. H. , 1999 , “ Transient...

... important in ballistic conduction and when the temperature T h is great compared to T 0 . Fig. 11 Distribution of total entropy generation due to heat transfer as a function of Knudsen number and Ω factor at t *  = 100: ( a ) without a temperature-jump boundary condition and ( b...

... emerging parameters on entropy generation number ( N G ) and Bejan number ( Be ) are investigated graphically in detail. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received October 6, 2016; final...

... of the nonisothermal drawing of a capillary preform to fiber. Model development was carried out in two stages. Initially, a fully conjugate multiphase model, which includes all heat transfer modes within an operational fiber drawing furnace, was validated against available experimental data. To evaluate the external...

... pointwise temperatures on workpiece surface and internal points which can be used as a tool for designing machining conditions. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received June 15, 2016; final manuscript received December...

...Martinus A. Arie; Amir H. Shooshtari; Veena V. Rao; Serguei V. Dessiatoun; Michael M. Ohadi This paper focuses on the study of an innovative manifold microchannel design for air-side heat transfer enhancement that uses additive manufacturing (AM) technology. A numerical-based multi-objective...

... be optimistically predicted and controlled by choosing a desired path on phase diagrams. 1 Corrsponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received March 29, 2016; final manuscript received April 18, 2016; published...

... in SLS such as thin beds, high temperatures, and degrees of powder consolidation. Random particle packing structures of spherical particles are generated and heat transfer between the particles is calculated. A particle–particle contact conduction model, a particle–fluid–particle conduction model...

.... The IQR analysis shows that the laser fluence and the electron–lattice coupling factor have the strongest influences on the interfacial location, velocity, and temperatures. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T...

...Mustafa Turkyilmazoglu 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF H EAT T RANSFER . Manuscript received June 16, 2014; final manuscript received March 22, 2015; published online June 2, 2015. Assoc. Editor: Peter Vadasz...