... 2009 14 05 2010 13 08 2010 13 08 2010 boiling heat transfer lubricants mixtures pipe flow polymers nucleate pool boiling enhancement heat transfer lubricant Boiling heat transfer study usually is conducted for pure medium. However, generally, lubricant should...

...Tanmay Basak; Sankaran Durairaj A detailed theoretical analysis has been carried out to study efficient microwave assisted heating of thermoplastic (Nylon 66) slabs via polymer-ceramic-polymer composite attached with ceramic plate at one side. The ceramic layer or plate is chosen as Al 2 O 3 or SiC...

...Matthew J. Traum; Peter Griffith; Edwin L. Thomas; William A. Peters Microscale truss architectures provide high mechanical strength, light weight, and open porosity in polymer sheets. Liquid evaporation and transport of the resulting vapor through truss voids cool nearby surfaces. Thus, microtruss...

... and r c —the contact resistance. 20 07 2006 20 04 2007 composite material interfaces contact resistance finite element analysis heat transfer Kapitza resistance polymers thermal conductivity thermal conductivity composite thermal contact resistance finite elements...

... the passing behaviors of vapor through cloth. We appreciate that this research was partially supported by funds of Grant-in-Aid for Scientific Research in Japan. flow through porous media clothing cotton polymers heat transfer mass transfer temperature distribution two-phase flow flow visualisation...

... and a water-soluble polymer material. Rectangular heat exchangers with 3.2 cm×2.2 cm planform area and varying thickness, porosity, number of channels, and channel diameter were fabricated and tested. The perchannel Reynolds number places the friction coefficients in the developing to developed hydrodynamic...

...Zhihua Li; Jane H. Davidson; Susan C. Mantell The use of polymer tubes for heat exchanger tube bundles is of interest in many applications where corrosion, mineral build-up and/or weight are important. The challenge of overcoming the low thermal conductivity of polymers may be met by using many...

... Current Address: Ecole des Mines de Douai, Technology of Polymers and Composites Department, 941 Rue Charles Bourseul, 59508 Douai, France Hsiao , K. T. , Laudorn , H. , and Advani , S. G. , 2001 , “ Experimental Investigation of Thermal Dispersion Due to Impregnation of Viscous...

... surfactants drag reduction turbulence channel flow non-Newtonian flow non-Newtonian fluids cryogenics transmission electron microscopy Heat Transfer Microstructures Non-Newtonian Polymers Rheological Thermal Turbulence Visualization Vortex Reduction of friction losses in turbulent...

....-C., Moon, T. J., and Howell, J. R., 2002, “On-Line Processing of Unidirectional Fiber Composites Using Radiative Heating: I. Model,” J. Compos. Mater., 36 . Kim , C. , Teng , H. , Tucker , C. L. , and White , S. R. , 1995 , “ The Continuous Curing Process for Thermoset Polymer...

...William P. King; Kenneth E. Goodson 16 07 2002 atomic force microscopy nanostructured materials imaging polymers thermal resistance Journal of Heat Transfer AUGUST 2002, Vol. 124 Õ 597 2002 ASME ...

...R. M. Tarafdar; T. L. Bergman Simulations and experiments are performed to investigate the coupled thermal and morphological response of polymer material during non-isothermal sintering. The experimental results are utilized to validate a numerical model that describes the response of the system...

... of Michigan, Ann Arbor, MI. 06 February 2000 03 November 2000 polymers fires combustion absorption coefficients light absorption Combustion Fire Heat Transfer Particulate Radiation Fires fueled by silicones exhibit low heat release rates and fire severity 1 2...

...S. K. Parihar; N. T. Wright 05 Aug 1998 16 Dec 1998 05 12 2007 Conduction Contact Resistance Heat Transfer Polymers Cooper M. G. , Mikic B. B. , and Yovanovich M. M. , 1969 , “ Thermal Contact Conductance ,” J. Heat Mass Trans. , Vol. 12 , pp. 279...

... directions. Choy et al. 1 demonstrated, however, that initially isotropic semi-crystalline polymers may develop anisotropic thermal diffusivity when subjected to plastic deformation. In order to determine if the initial three-dimensional results were an experimental...