Abstract

This paper investigates the burnishing characteristics of a developed sliding burnishing method with active rotary tool targeting a martensitic stainless steel. Two types of martensitic stainless steel, annealing (AN) stainless steel and quenching and tempering (QT) stainless steel, were targeted. The burnishing characteristics evaluated included surface roughness, profile, microstructure, subsurface hardness, bending property, and corrosion resistance. A sufficiently smooth surface, approximately Ra = 0.1 μm and Ra = 0.025 μm in both materials, respectively, was obtained using the developed burnishing method; irregular profile smoothing occurred due to the material flow of the subsurface. The subsurface hardness increased at a depth of 40 μm or more when using the developed burnishing method on the AN material, but no effect was observed for the QT material. Moreover, the bending yield point and strength of the sheet shape workpiece increased by applying the burnishing process to the AN material. The influence of the burnishing process on the bending properties was also observed for the QT material. Corrosion resistance can be improved through the burnishing process.

This content is only available via PDF.
You do not currently have access to this content.