A reconfigurable fixturing device (RFD) is a computer-controlled reconfigurable bed-of-pins used for holding a compliant workpiece during manufacturing operations. A new RFD design, based on controlled clamping of loose pins descending on a position-controlled platen, is much simpler in design and is estimated to be significantly less expensive to make than commercially available machines. A RFD prototype with a 5×5 matrix of pins that can be individually clamped using custom-designed solenoids was prototyped to demonstrate the technology. A solenoid, which is considered the best method for clamping RFD pins, has not been used before in either commercial devices or prototypes discussed in the literature. Design models that predict stopping time and distance of pins clamped with a solenoid have also been developed along with a single pin experimental setup instrumented with linear encoders for model validation. The RFD prototype successfully demonstrated controlled clamping of the matrix of pins in either manual or computer-controlled mode. Another useful result was the validation of models for estimating solenoid force as a function of position, time for the solenoid plunger to impact the pin once energized, and distance the vertically descending pin drops before and immediately after impact by the plunger. Experimental data show that the models can accurately predict pin positioning performance with a solenoid as long as friction within the device is included. Since this RFD concept has been fully demonstrated by the prototype device, the next step in development will be a commercial machine. As such, the models for pin positioning can be used to predict shape accuracy of a particular RFD design and solenoid combination.

1.
Walczyk
,
D. F.
, and
Longtin
,
R. S.
, 2000, “
Fixturing of Compliant Parts Using a Matrix of Reconfigurable Pins
,”
ASME J. Manuf. Sci. Eng.
1087-1357,
122
(
4
), pp.
766
772
.
2.
Thyberg
,
B. S. J.
, and
Elmgren
,
K. A. S.
, 1977, “
Clamping Device for Work Pieces of Irregular Shape
,” U.S. Patent No. 4047709.
3.
Frosch
,
R. A.
,
Zebus
,
P. P.
,
Packer
,
P. N.
, and
Haynie
,
C. C.
, 1978, “
Variable Contour Securing System
,” U.S. Patent No. 4088312.
4.
Godding
,
R. G.
, 1980, “
Holder for Irregularly Shaped Articles
,” U.S. Patent No. 4200272.
5.
Barozzi
,
G. P.
, 1990, “
Workpiece-Support Assembly for Automatic Machining Lines
,” U.S. Patent No. 4936560.
6.
Terai
,
K.
,
Kurioka
,
T.
, and
Takeuchi
,
H.
, 1971, “
Plate Controlled Jigs for Built-Up Surface
,” U.S. Patent No. 3559980.
7.
Doublas
,
W.
, and
Ozer
,
T.
, 1987, “
Universal Holding Fixture
,” U.S. Patent No. 4684113.
8.
Schroeder
,
T.
, and
Stevenson
,
R.
, 1998, “
Device for Generating a Fixture
,” U.S. Patent No. 5738345.
9.
Haas
,
E. G.
,
Sullivan
,
E. V.
,
Schwarz
,
R. C.
, and
Papazian
,
J. M.
, 2000, “
Method of Forming a Modularized Adjustable Holding Fixture
,” U.S. Patent No. 6032348.
10.
Youcef-Toumi
,
K.
,
Liu
,
W. S.
, and
Asada
,
H.
, 1993, “
Computer-Aided Analysis of Reconfigurable Fixtures and Sheet Metal Parts for Robotic Drilling
,”
Rob. Comput.-Integr. Manufact.
0736-5845,
4
(
3/4
), pp.
387
393
.
11.
Rearick
,
M.
,
Hu
,
S. J.
, and
Wu
,
S. M.
, 1993, “
Optimal Fixture Design for Deformable Sheet Metal Workpieces
,”
Trans. NAMRI/SME
1047-3025,
21
, pp.
407
412
.
12.
Cai
,
W.
,
Hu
,
S. J.
, and
Yuan
,
J. X.
, 1996, “
Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations
,”
ASME J. Manuf. Sci. Eng.
1087-1357,
118
, pp.
318
324
.
13.
Hurtado
,
J. F.
, and
Melkote
,
S. N.
, 2002, “
A Model for Synthesis of the Fixturing Configuration in Pin-Array Type Flexible Machining Fixtures
,”
Int. J. Mach. Tools Manuf.
0890-6955,
42
, pp.
837
849
.
14.
Youcef-Toumi
,
K.
, and
Buitrago
,
J. H.
, 1989, “
Design and Implementation of Robot-Operated Adaptable and Modular Fixtures
,”
Rob. Comput.-Integr. Manufact.
0736-5845,
5
(
4
), pp.
343
356
.
15.
Al-Habaibeh
,
A.
,
Gindy
,
N.
, and
Parkin
,
R. M.
, 2003, “
Experimental Design and Investigation of a Pin-Type Reconfigurable Clamping System for Manufacturing Aerospace Components
,”
Proc. Inst. Mech. Eng., Part B
0954-4054,
217
(
12
), pp.
1771
1777
.
16.
Teresko
,
J.
, 2001, “
Technologies of the Year—Intelligent Fixturing System
,”
Ind. Week
0039-0895,
250
(
15
), p.
52
.
18.
Chan
,
K. C.
, and
Lin
,
C. S.
, 1996, “
Development of a Computer Numerical Control (CNC) Modular Fixture—Machine Design of a Standard Multifinger Module
,”
Int. J. Adv. Manuf. Technol.
,
11
(
1
), pp.
18
26
. 0268-3768
19.
Proctor
,
P.
, 1998, “
Pogo Fixtures Enhance Tool Flexibility
,”
Aviat. Week Space Technol.
0005-2175,
149
(
8
), pp.
50
52
.
22.
Hwang
,
W.
, 2002, “
Design of an Inexpensive Reconfigurable Fixturing Device for Compliant Parts
,” MS thesis, Rensselaer Polytechnic Institute, Troy, New York.
24.
Paul
,
C.
,
Whites
,
K.
, and
Nasar
,
S.
, 1998,
Introduction to Electromagnetic Fields
, 3rd ed.,
McGraw-Hill
,
New York
.
You do not currently have access to this content.