This paper presents an investigation of fixel design alternatives for active (dynamic) fixturing to be incorporated into mesoscale manufacturing systems. Using simple compliant mechanisms and components, fixels exhibiting mechanically adjustable stiffness characteristics are achievable. Via manual or automated stiffness adjustments, these fixels provide functionality for enabling greater control of the dynamic response of the workpiece subject to vibrations and/or variations in contact forces at the tool-workpiece-fixture interface. To quantify the fixel functionality, this paper presents theoretical models of the stiffness characteristics expressed as a function of the mechanical variable(s), thus forming a basis for exploring the adjustability in stiffness achievable for each fixel design. Also presented are results of the dynamic behavior of the active fixturing implemented in a milling process based on a “regenerative force, dynamic deflection model” augmented with the active fixturing variable stiffness model and inclusion of tool runout. These simulation results indicate the expected performance of the active fixturing upon its implementation in actual fixturing for the creation of micron features on micro- and macroparts.
Modeling and Analysis of Fixel Designs for Micromanufacturing Active Fixturing
Rippere, T. B., Rao, K. J., and Wiens, G. J. (March 30, 2011). "Modeling and Analysis of Fixel Designs for Micromanufacturing Active Fixturing." ASME. J. Manuf. Sci. Eng. April 2011; 133(2): 024505. https://doi.org/10.1115/1.4003784
Download citation file: