Topics: Anodes , Boundary-value problems , Current density , Electric arcs , Gas tungsten arc welding , Magnetic fields , Temperature , Heat flux , Electric potential , Pressure

Estimation of Milling Tool Temperature Considering Coolant and Wear

Hsin-Yu Kuo, Kevin Meyer, Roger Lindle, Jun Ni

J. Manuf. Sci. Eng. June 2012, 134(3): 031002. doi: https://doi.org/10.1115/1.4005799

Abstract

View articletitled, Estimation of Milling Tool Temperature Considering Coolant and Wear

Open the PDF for in another window

Topics: Coolants , Cutting , Heat , Milling , Temperature , Wear , Modeling , Heat flux , Flow (Dynamics)

Development of an Empirical Model to Characterize Fracture Behavior During Forming of Advanced High Strength Steels Under Bending Dominated Conditions

S. Sriram, H. Yao, N. Ramisetti

J. Manuf. Sci. Eng. June 2012, 134(3): 031003. doi: https://doi.org/10.1115/1.4006092

Abstract

View articletitled, Development of an Empirical Model to Characterize Fracture Behavior During Forming of Advanced High Strength Steels Under Bending Dominated Conditions

Open the PDF for in another window

Topics: Failure , Finite element analysis , Fracture (Materials) , Fracture (Process) , Tension , Necking , Stress , Steel , Metal stamping , Shear (Mechanics)

Machine Tool Condition Monitoring Based on an Adaptive Gaussian Mixture Model

Jianbo Yu

J. Manuf. Sci. Eng. June 2012, 134(3): 031004. doi: https://doi.org/10.1115/1.4006093

Abstract

View articletitled, Machine Tool Condition Monitoring Based on an Adaptive Gaussian Mixture Model

Open the PDF for in another window

Topics: Algorithms , Condition monitoring , Density , Machine tools , Probability , Sensors , Signals , Wear , Feature extraction , Machinery

An Experimental and Numerical Investigation on Polymer Melt Injected Sheet Metal Forming

Muhammad Masood Hussain, Michael Trompeter, Jörg Witulski, A. Erman Tekkaya

J. Manuf. Sci. Eng. June 2012, 134(3): 031005. doi: https://doi.org/10.1115/1.4006117

Abstract

View articletitled, An Experimental and Numerical Investigation on Polymer Melt Injected Sheet Metal Forming

Open the PDF for in another window

Topics: Blanks , Domes (Structural elements) , Polymer melts , Pressure , Sheet metal , Temperature , Polymers , Sheet metal work

Femtosecond Laser-Induced Simultaneous Surface Texturing and Crystallization of a-Si:H Thin Film: Absorption and Crystallinity

Hongliang Wang, Panjawat Kongsuwan, Gen Satoh, Y. Lawrence Yao

J. Manuf. Sci. Eng. June 2012, 134(3): 031006. doi: https://doi.org/10.1115/1.4006548

Abstract

View articletitled, Femtosecond Laser-Induced Simultaneous Surface Texturing and Crystallization of a-Si:H Thin Film: Absorption and Crystallinity

Open the PDF for in another window

Topics: Absorption , Crystallization , Lasers , Water , Spectra (Spectroscopy) , Thin films , Silicon

Piecewise B-Spline Tool Paths With the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles

Zezhong C. Chen, Maqsood A. Khan

J. Manuf. Sci. Eng. June 2012, 134(3): 031007. doi: https://doi.org/10.1115/1.4006551

Abstract

View articletitled, Piecewise B-Spline Tool Paths With the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles

Open the PDF for in another window

Topics: B-splines , Errors

Effect of Severe Plastic Deformation in Machining Elucidated via Rate-Strain-Microstructure Mappings

S. Shekhar, S. Abolghasem, S. Basu, J. Cai, M. R. Shankar

J. Manuf. Sci. Eng. June 2012, 134(3): 031008. doi: https://doi.org/10.1115/1.4006549

Abstract

View articletitled, Effect of Severe Plastic Deformation in Machining Elucidated via Rate-Strain-Microstructure Mappings

Open the PDF for in another window

Topics: Deformation , Grain size , Machining , Temperature , Thermography

CAD-Based Calculation of Cutting Force Components in Gear Hobbing

Tapoglou Nikolaos, Antoniadis Aristomenis

J. Manuf. Sci. Eng. June 2012, 134(3): 031009. doi: https://doi.org/10.1115/1.4006553

Abstract

View articletitled, CAD-Based Calculation of Cutting Force Components in Gear Hobbing

Open the PDF for in another window

Topics: Cutting , Gears , Simulation , Computer-aided design

Experimental and Numerical Analysis of Low Output Power Laser Bending of Thin Steel Sheets

Vicente Stevens, Diego Celentano, Jorge Ramos-Grez, Magdalena Walczak

J. Manuf. Sci. Eng. June 2012, 134(3): 031010. doi: https://doi.org/10.1115/1.4005807

Abstract

View articletitled, Experimental and Numerical Analysis of Low Output Power Laser Bending of Thin Steel Sheets

Open the PDF for in another window

Topics: Lasers , Temperature , Deformation , Thermomechanics , Laser beams

The Influence of Friction Stir Welding Process Idealization on Residual Stress and Distortion Predictions for Future Airframe Assembly Simulations

R. W. McCune, A. Murphy, M. Price, J. Butterfield

J. Manuf. Sci. Eng. June 2012, 134(3): 031011. doi: https://doi.org/10.1115/1.4006554

Abstract

View articletitled, The Influence of Friction Stir Welding Process Idealization on Residual Stress and Distortion Predictions for Future Airframe Assembly Simulations

Open the PDF for in another window

Topics: Manufacturing , Simulation , Stress , Welding , Friction , Engineering simulation , Modeling , Torque , Residual stresses , Forging

Technical Briefs

An Approach for Automated and Optimized Selection of Weldguns for Spot Welding in Automotive Body Shop

Ashish Gupta, Gopalakrishna K. Shastry, Narahari K. Hunsur, Wayne Cai, Robert Tilove

J. Manuf. Sci. Eng. June 2012, 134(3): 034501. doi: https://doi.org/10.1115/1.4005795

Abstract

View articletitled, An Approach for Automated and Optimized Selection of Weldguns for Spot Welding in Automotive Body Shop

Open the PDF for in another window

Topics: Design , Manufacturing , Welding , Geometry , Automobiles , Automotive industry , Integer programming , Production planning , Vacuum , Vehicles

Nondestructive Testing of Ultrasonic Welding Joints Using Shearography Technique

Shuhai Jia, En Hong, Reuven Katz, Leonid C. Lev, Susan Smyth, Jeffrey Abell

J. Manuf. Sci. Eng. June 2012, 134(3): 034502. doi: https://doi.org/10.1115/1.4006550

Abstract

View articletitled, Nondestructive Testing of Ultrasonic Welding Joints Using Shearography Technique

Open the PDF for in another window

Topics: Nondestructive evaluation , Ultrasonic welding , Batteries , Inspection

Enhanced Laser Shock by an Active Liquid Confinement—Hydrogen Peroxide

Yiliang Liao, Yingling Yang, Gary J. Cheng

J. Manuf. Sci. Eng. June 2012, 134(3): 034503. doi: https://doi.org/10.1115/1.4006552

Abstract

View articletitled, Enhanced Laser Shock by an Active Liquid Confinement—Hydrogen Peroxide

Open the PDF for in another window

Topics: Hydrogen , Laser hardening , Lasers , Plasmas (Ionized gases) , Pressure , Shock (Mechanics) , Water , Ablation (Vaporization technology) , Laser ablation , Etching

Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability

Joshua J. Jones, Laine Mears, John T. Roth

J. Manuf. Sci. Eng. June 2012, 134(3): 034504. doi: https://doi.org/10.1115/1.4006547

Abstract

View articletitled, Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability

Open the PDF for in another window

Topics: Current density , Deformation , Magnesium (Metal) , Temperature , Electric arc furnaces

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effects of chitosan addition on mechanical, surface, and antibacterial properties of 3D printed photopolymers

J. Manuf. Sci. Eng

Effect of Process Parameters on Texture in Quasi-Isotropic IN718 Processed by Laser Powder Bed Fusion

J. Manuf. Sci. Eng (July 2025)

Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in Single Point Incremental Forming

J. Manuf. Sci. Eng

Characterization of adhesion in lithium-ion battery electrodes with laser-textured current collectors

J. Manuf. Sci. Eng

Experimental Study on Force and Surface Morphology of Additive Manufacturing FeCoNiCrAl_0.5 High Entropy Alloy

J. Manuf. Sci. Eng (July 2025)

Research Papers

Modeling Three-Dimensional Plasma Arc in Gas Tungsten Arc Welding

Estimation of Milling Tool Temperature Considering Coolant and Wear

Development of an Empirical Model to Characterize Fracture Behavior During Forming of Advanced High Strength Steels Under Bending Dominated Conditions

Machine Tool Condition Monitoring Based on an Adaptive Gaussian Mixture Model

An Experimental and Numerical Investigation on Polymer Melt Injected Sheet Metal Forming

Femtosecond Laser-Induced Simultaneous Surface Texturing and Crystallization of a-Si:H Thin Film: Absorption and Crystallinity

Piecewise B-Spline Tool Paths With the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles

Effect of Severe Plastic Deformation in Machining Elucidated via Rate-Strain-Microstructure Mappings

CAD-Based Calculation of Cutting Force Components in Gear Hobbing

Experimental and Numerical Analysis of Low Output Power Laser Bending of Thin Steel Sheets

The Influence of Friction Stir Welding Process Idealization on Residual Stress and Distortion Predictions for Future Airframe Assembly Simulations

Technical Briefs

An Approach for Automated and Optimized Selection of Weldguns for Spot Welding in Automotive Body Shop

Nondestructive Testing of Ultrasonic Welding Joints Using Shearography Technique

Enhanced Laser Shock by an Active Liquid Confinement—Hydrogen Peroxide

Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only