Topics: Additive manufacturing , Artificial neural networks , Geometry , Imaging , Process monitoring , Quality control , Shapes , Flaw detection , Computer-aided design , Machinery

The Influence of X-Ray Computed Tomography Acquisition Parameters on Image Quality and Probability of Detection of Additive Manufacturing Defects

Felix H. Kim, Adam L. Pintar, Shawn P. Moylan, Edward J. Garboczi

J. Manuf. Sci. Eng. November 2019, 141(11): 111002. doi: https://doi.org/10.1115/1.4044515

Abstract

View articletitled, The Influence of X-Ray Computed Tomography Acquisition Parameters on Image Quality and Probability of Detection of Additive Manufacturing Defects

Open the PDF for in another window

Topics: Additive manufacturing , Algorithms , Computerized tomography , Inspection , Magnification , Noise (Sound) , Probability , Sensors , Signals , X-rays

Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle

Xiaohong Lu, Zhenyuan Jia, Shengqian Liu, Kun Yang, Yixuan Feng, Steven Y. Liang

J. Manuf. Sci. Eng. November 2019, 141(11): 111003. doi: https://doi.org/10.1115/1.4044520

Abstract

View articletitled, Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle

Open the PDF for in another window

Topics: Bearings , Frequency response , Micromilling , Stability , Centrifugal force , Chatter , Dynamics (Mechanics)

Additive Manufacturing of Bi-Continuous Piezocomposites With Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity

Xuan Song, Li He, Wenhua Yang, Zhuo Wang, Zeyu Chen, Jing Guo, Hong Wang, Lei Chen

J. Manuf. Sci. Eng. November 2019, 141(11): 111004. doi: https://doi.org/10.1115/1.4044708

Abstract

View articletitled, Additive Manufacturing of Bi-Continuous Piezocomposites With Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity

Open the PDF for in another window

Topics: Additive manufacturing , Ceramics , Manufacturing , Phase interfaces , Piezoelectricity , Polymers , Piezoelectric ceramics , Stress , Composite materials , Ferroelectric ceramics

Intensity-Based Registration With Voxel-Based Computer-Aided Manufacturing for Adaptive Machining

James S. Collins, Tommy Tucker, Thomas Kurfess

J. Manuf. Sci. Eng. November 2019, 141(11): 111005. doi: https://doi.org/10.1115/1.4044709

Abstract

View articletitled, Intensity-Based Registration With Voxel-Based Computer-Aided Manufacturing for Adaptive Machining

Open the PDF for in another window

Topics: Computer-aided design , Computer-aided manufacturing , Machining , Manufacturing , Resolution (Optics) , Surface roughness , Algorithms , Impellers , Biomedical imaging , Computer software

Effect of Progressive Tool Wear on the Evolution of the Dynamic Stability Limits in High-Speed Micromilling of Ti-6Al-4V

Rinku Mittal, Chinmay Maheshwari, Salil S. Kulkarni, Ramesh Singh

J. Manuf. Sci. Eng. November 2019, 141(11): 111006. doi: https://doi.org/10.1115/1.4044713

Abstract

View articletitled, Effect of Progressive Tool Wear on the Evolution of the Dynamic Stability Limits in High-Speed Micromilling of Ti-6Al-4V

Open the PDF for in another window

Topics: Cutting , Micromilling , Stability , Wear , Machining , Dynamic stability

Increasing the Measuring Accuracy of a Sensory Swing Clamp by Multi-Sensor Evaluation

Berend Denkena, Benjamin Bergmann, Johann Kiesner

J. Manuf. Sci. Eng. November 2019, 141(11): 111007. doi: https://doi.org/10.1115/1.4044714

Abstract

View articletitled, Increasing the Measuring Accuracy of a Sensory Swing Clamp by Multi-Sensor Evaluation

Open the PDF for in another window

Topics: Boundary-value problems , Bridges (Structures) , Clamps (Tools) , Pistons , Pressure , Sensors , Signals , Strain gages

Conditions for Wall Thickness Reduction in Hollow Sinking of SUS304 Tubes With Drawing Speed Control in Entrance and Exit Sides of Die

Takuma Kishimoto, Shiori Gondo, Kosuke Takemoto, Kenichi Tashima, Shinsuke Suzuki

J. Manuf. Sci. Eng. November 2019, 141(11): 111008. doi: https://doi.org/10.1115/1.4044710

Abstract

View articletitled, Conditions for Wall Thickness Reduction in Hollow Sinking of SUS304 Tubes With Drawing Speed Control in Entrance and Exit Sides of Die

Open the PDF for in another window

Topics: Stress , Wall thickness , Slabs

Design and Kinematic Analysis of a Novel Machine Tool With Four Rotational Axes and One Translational Axis

Song Gao, Jihong Chen, Shusheng Liu, Xiukun Yuan, Pengcheng Hu, Jianzhong Yang

J. Manuf. Sci. Eng. November 2019, 141(11): 111009. doi: https://doi.org/10.1115/1.4044711

Abstract

View articletitled, Design and Kinematic Analysis of a Novel Machine Tool With Four Rotational Axes and One Translational Axis

Open the PDF for in another window

Topics: Kinematic analysis , Kinematics , Machine tools , Machining , Impellers

Corrosion Characterization of Resistance Spot-Welded Aluminum and Steel Couple

Surender Maddela, Blair E. Carlson

J. Manuf. Sci. Eng. November 2019, 141(11): 111010. doi: https://doi.org/10.1115/1.4044836

Abstract

View articletitled, Corrosion Characterization of Resistance Spot-Welded Aluminum and Steel Couple

Open the PDF for in another window

Topics: Adhesives , Corrosion , Electrolytic corrosion , Steel , Testing , Aluminum alloys , Aluminum , Rivets , Joining

Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation

Zuowei Zhu, Nabil Anwer, Luc Mathieu

J. Manuf. Sci. Eng. November 2019, 141(11): 111011. doi: https://doi.org/10.1115/1.4044837

Abstract

View articletitled, Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation

Open the PDF for in another window

Topics: Additive manufacturing , Finite element analysis , Modal analysis , Modeling , Simulation , Shapes , Quality control

Electropulsing-Induced α to β Phase Transformation of Ti–6Al–4V

Jihui Huang, Zhutian Xu, Yujun Deng, Linfa Peng

J. Manuf. Sci. Eng. November 2019, 141(11): 111012. doi: https://doi.org/10.1115/1.4044835

Abstract

View articletitled, Electropulsing-Induced <em>α</em> to <em>β</em> Phase Transformation of Ti–6Al–4V

Open the PDF for in another window

Topics: Electric current , Phase transitions , Temperature , Heating

A Novel Rule-Based Method for Individualized Spot Welding Sequence Optimization With Respect to Geometrical Quality

Roham Sadeghi Tabar, Kristina Wärmefjord, Rikard Söderberg, Lars Lindkvist

J. Manuf. Sci. Eng. November 2019, 141(11): 111013. doi: https://doi.org/10.1115/1.4044254

Abstract

View articletitled, A Novel Rule-Based Method for Individualized Spot Welding Sequence Optimization With Respect to Geometrical Quality

Open the PDF for in another window

Topics: Manufacturing , Optimization , Simulation , Welding , Algorithms

Technical Brief

Effect of the Field Shaper Geometries in Electromagnetic Crimping of Tubes on Rods

Ramesh Kumar, Sachin D. Kore

J. Manuf. Sci. Eng. November 2019, 141(11): 114501. doi: https://doi.org/10.1115/1.4044516

Abstract

View articletitled, Effect of the Field Shaper Geometries in Electromagnetic Crimping of Tubes on Rods

Open the PDF for in another window

Topics: Copper , Current density , Finite element analysis , Joining , Magnetic fields , Materials properties , Modeling , Rods , Simulation , Temperature

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effect of microgravity on the metal droplet transfer and bead characteristics in the DED-arc process

J. Manuf. Sci. Eng

Fabrication Time Diagrams for In-Space Manufacturing of Large Reticulated Structures

J. Manuf. Sci. Eng

Gravitational effects on optical lens fabrication: First insides on Earth- and microgravity experiments

J. Manuf. Sci. Eng

Femtosecond Pulsed Laser Machining of Fused Silica for Micro-Cavities with Sharp-Corners

J. Manuf. Sci. Eng

Acquired angle error correction based on variation of an angle detection signal intensity in rotary encoders

J. Manuf. Sci. Eng

Research Papers

Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control

The Influence of X-Ray Computed Tomography Acquisition Parameters on Image Quality and Probability of Detection of Additive Manufacturing Defects

Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle

Additive Manufacturing of Bi-Continuous Piezocomposites With Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity

Intensity-Based Registration With Voxel-Based Computer-Aided Manufacturing for Adaptive Machining

Effect of Progressive Tool Wear on the Evolution of the Dynamic Stability Limits in High-Speed Micromilling of Ti-6Al-4V

Increasing the Measuring Accuracy of a Sensory Swing Clamp by Multi-Sensor Evaluation

Conditions for Wall Thickness Reduction in Hollow Sinking of SUS304 Tubes With Drawing Speed Control in Entrance and Exit Sides of Die

Design and Kinematic Analysis of a Novel Machine Tool With Four Rotational Axes and One Translational Axis

Corrosion Characterization of Resistance Spot-Welded Aluminum and Steel Couple

Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation

Electropulsing-Induced α to β Phase Transformation of Ti–6Al–4V

A Novel Rule-Based Method for Individualized Spot Welding Sequence Optimization With Respect to Geometrical Quality

Technical Brief

Effect of the Field Shaper Geometries in Electromagnetic Crimping of Tubes on Rods

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only