Thermomechanical fatigue (TMF) and isothermal fatigue (IF) experiments were performed on bare Mar-M246 as well as bare and coated Mar-M247 nickel based superalloys at strain ranges from 0.335 to 1 percent. The experiments were conducted in air, through a temperature range of 500 to 1038°C at a constant strain rate of 5.0 × 10-5 s-1. Due to the coarse-grained structure of Mar-M246, TMF lives scattered considerably under low strain range conditions. Electron microscopy studies show that significant surface oxidation and gamma prime, γ′, depleted zones occur for Mar-M246 under these conditions. In the surface grain, where the change in γ′ morphology is most pronounced, γ′ rafted along axes ≈ ±45 deg from the loading axis. The influence of a protective coating on the IF and TMF lives of Mar-M247 was also examined. Results indicate that the coating does not significantly affect the fatigue lives of Mar-M247. The oxidation behavior of bare and coated Mar-M247 was investigated via X-ray microprobe and Auger Spectroscopy. Through these analyses, it is evident that the coating was completely degraded when exposed to the test environment for a long time. In both Mar-M246 and Mar-M247, in-phase thermomechanical fatigue (TMF IP) loading resulted in intergranular cracking. TMF IP loading promoted multiple cracks at the coating/substrate interface of coated Mar-M247. Finally, Eshelby techniques were used to calculate stress distributions in the vicinity of a surface oxide and second-phase particle at the coating/substrate interface.
Skip Nav Destination
Article navigation
January 1996
Technical Papers
Thermomechanical and Isothermal Fatigue Behavior of Bare and Coated Superalloys
Yavuz Kadioglu,
Yavuz Kadioglu
Department of Mechanical Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801
Search for other works by this author on:
Huseyin Sehitoglu
Huseyin Sehitoglu
Department of Mechanical Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801
Search for other works by this author on:
Yavuz Kadioglu
Department of Mechanical Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801
Huseyin Sehitoglu
Department of Mechanical Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801
J. Eng. Mater. Technol. Jan 1996, 118(1): 94-102 (9 pages)
Published Online: January 1, 1996
Article history
Received:
January 19, 1994
Revised:
September 15, 1994
Online:
November 27, 2007
Citation
Kadioglu, Y., and Sehitoglu, H. (January 1, 1996). "Thermomechanical and Isothermal Fatigue Behavior of Bare and Coated Superalloys." ASME. J. Eng. Mater. Technol. January 1996; 118(1): 94–102. https://doi.org/10.1115/1.2805939
Download citation file:
Get Email Alerts
Related Articles
Thermo-Mechanical Fatigue of Mar-M247: Part 1—Experiments
J. Eng. Mater. Technol (January,1990)
Biaxial Thermomechanical-Fatigue Life Property of a Directionally Solidified Ni-Base Superalloy
J. Eng. Gas Turbines Power (November,2008)
Observations of Material Behavior Under Isothermal and Thermo-Mechanical Loading
J. Eng. Mater. Technol (April,1986)
Intermediate Temperature, Low-Cycle Fatigue Behavior of Coated and Uncoated Nickel Base Superalloys in Air and Corrosive Sulfate Environments
J. Eng. Mater. Technol (January,1984)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Understanding the Problem
Design and Application of the Worm Gear
Relationship Between Tool Deterioration and Cutting Force During Milling of a Nickel-Based Superalloy Using Cemented Carbide Tool
Advances in Multidisciplinary Engineering