Volume 124 Issue 2 | J. Eng. Mater. Technol.

Technical Papers

On the Optimal Damping of a Vibrating Shape Memory Alloy Rod

Eduard R. Oberaigner, Franz D. Fischer, Kikuaki Tanaka

J. Eng. Mater. Technol. April 2002, 124(2): 97–102. doi: https://doi.org/10.1115/1.1310306

View articletitled, On the Optimal Damping of a Vibrating Shape Memory Alloy Rod

Topics: Damping , Heat conduction , Shape memory alloys , Stress , Temperature , Vibration , Phase transitions , Waves , Integral equations , Constitutive equations

Application of a Unified Viscoplastic Model With Mixed Hardening to Ionic Solids and Metallic Alloys

O. M. L. Yahya, M. Aubertin

J. Eng. Mater. Technol. April 2002, 124(2): 103–111. doi: https://doi.org/10.1115/1.1446865

Abstract

View articletitled, Application of a Unified Viscoplastic Model With Mixed Hardening to Ionic Solids and Metallic Alloys

Open the PDF for in another window

Topics: Alloys , Creep , Flow (Dynamics) , Hardening , Relaxation (Physics) , Steel , Stress , Temperature , Constitutive equations , Dislocations

Mechanical Behavior of a Cu-Al-Be Shape Memory Alloy Under Multiaxial Proportional and Nonproportional Loadings

Christophe Bouvet, Sylvain Calloch, Christian Lexcellent

J. Eng. Mater. Technol. April 2002, 124(2): 112–124. doi: https://doi.org/10.1115/1.1448324

Abstract

View articletitled, Mechanical Behavior of a Cu-Al-Be Shape Memory Alloy Under Multiaxial Proportional and Nonproportional Loadings

Open the PDF for in another window

Topics: Compression , Mechanical behavior , Pressure , Shape memory alloys , Shapes , Stress , Tension , Testing equipment , Stress-strain curves , Temperature

Anisotropic Yield Locus Evolution During Cold Pilgering of Titanium Alloy Tubing

Richard W. Davies, Mohammad A. Khaleel, William C. Kinsel, Hussein M. Zbib

J. Eng. Mater. Technol. April 2002, 124(2): 125–134. doi: https://doi.org/10.1115/1.1446472

Abstract

View articletitled, Anisotropic Yield Locus Evolution During Cold Pilgering of Titanium Alloy Tubing

Open the PDF for in another window

Topics: Anisotropy , Deformation , Finite element analysis , Stress , Texture (Materials) , Titanium alloys , Tubing , Yield strength , Testing , Thermal stresses

Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening

Hitoshi Soyama, Kenichi Saito, Masumi Saka

J. Eng. Mater. Technol. April 2002, 124(2): 135–139. doi: https://doi.org/10.1115/1.1447926

Abstract

View articletitled, Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening

Open the PDF for in another window

Topics: Aluminum alloys , Cavitation , Fatigue strength , Fatigue testing , Shot peening , Stress , Strips

Three-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys

Jidong Kang, W. Steven Johnson, David A. Clark

J. Eng. Mater. Technol. April 2002, 124(2): 140–145. doi: https://doi.org/10.1115/1.1448922

Abstract

View articletitled, Three-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys

Open the PDF for in another window

Topics: Aluminum alloys , Finite element analysis , Residual stresses , Stress , Hardening , Finishes , Work hardening

Some Plastic Deformation Modes for Indentation of Half Space by a Rigid Body With Serrated Surface as a Model of Roughness Transfer in Metal Forming

Jingyu Shi, D. L. S. McElwain, S. A. Domanti

J. Eng. Mater. Technol. April 2002, 124(2): 146–151. doi: https://doi.org/10.1115/1.1446864

Abstract

View articletitled, Some Plastic Deformation Modes for Indentation of Half Space by a Rigid Body With Serrated Surface as a Model of Roughness Transfer in Metal Forming

Open the PDF for in another window

Topics: Deformation , Surface roughness , Metalworking

In Situ Matrix Shear Response Using Torsional Test Data of Fiber Reinforced Unidirectional Polymer Composites

Chandra S. Yerramalli, Anthony M. Waas

J. Eng. Mater. Technol. April 2002, 124(2): 152–159. doi: https://doi.org/10.1115/1.1446471

Abstract

View articletitled, <em>In Situ</em> Matrix Shear Response Using Torsional Test Data of Fiber Reinforced Unidirectional Polymer Composites

Open the PDF for in another window

Topics: Carbon , Composite materials , Fibers , Glass , Shear (Mechanics) , Shear modulus , Cylinders , Polymer composites , Stress-strain curves , Torsion

Surface Texture, Fatigue, and the Reduction in Stiffness of Fiber Reinforced Plastics

D. Arola, C. L. Williams

J. Eng. Mater. Technol. April 2002, 124(2): 160–166. doi: https://doi.org/10.1115/1.1416479

Abstract

View articletitled, Surface Texture, Fatigue, and the Reduction in Stiffness of Fiber Reinforced Plastics

Open the PDF for in another window

Topics: Fatigue , Laminates , Stiffness , Surface roughness , Surface texture , Fiber reinforced plastics , Stress , Stress concentration

Effect of Strain Gradients and Heterogeneity on Flow Strength of Particle Reinforced Metal-Matrix Composites

D-M. Duan, N. Q. Wu, M. Zhao, W. S. Slaughter, Scott X. Mao

J. Eng. Mater. Technol. April 2002, 124(2): 167–173. doi: https://doi.org/10.1115/1.1417487

Abstract

View articletitled, Effect of Strain Gradients and Heterogeneity on Flow Strength of Particle Reinforced Metal-Matrix Composites

Open the PDF for in another window

Topics: Deformation , Dislocations , Flow (Dynamics) , Metal matrix composites , Particle size , Particulate matter , Strain gradient , Stress , Plasticity

Analysis of High Volume Fraction Irregular Particulate Damping Composites

R. S. Lakes, S. Kose, H. Bahia

J. Eng. Mater. Technol. April 2002, 124(2): 174–178. doi: https://doi.org/10.1115/1.1448923

Abstract

View articletitled, Analysis of High Volume Fraction Irregular Particulate Damping Composites

Open the PDF for in another window

Topics: Asphalt , Composite materials , Damping , Finite element analysis , Particulate matter , Stiffness , Viscoelasticity , Shapes , Shear modulus

Relationship Between Rockwell C Hardness and Inelastic Material Constants

Akihiko Hirano, Masao Sakane, Naomi Hamada

J. Eng. Mater. Technol. April 2002, 124(2): 179–184. doi: https://doi.org/10.1115/1.1446863

Abstract

View articletitled, Relationship Between Rockwell C Hardness and Inelastic Material Constants

Open the PDF for in another window

Topics: Deformation , Displacement , Finite element analysis , Friction , Testing , Work hardening , Yield stress , Young's modulus , Finite element model

Residual Stress Measurement in a Ceramic-Metallic Graded Material

Michael R. Hill, Wei-Yan Lin

J. Eng. Mater. Technol. April 2002, 124(2): 185–191. doi: https://doi.org/10.1115/1.1446073

Abstract

View articletitled, Residual Stress Measurement in a Ceramic-Metallic Graded Material

Open the PDF for in another window

Topics: Error analysis , Stress , Functionally graded materials

Development of an Analytical Model for Drilling Burr Formation in Ductile Materials

Jinsoo Kim, David A. Dornfeld

J. Eng. Mater. Technol. April 2002, 124(2): 192–198. doi: https://doi.org/10.1115/1.1429937

Abstract

View articletitled, Development of an Analytical Model for Drilling Burr Formation in Ductile Materials

Open the PDF for in another window

Topics: Cutting , Deformation , Drilling , Drills (Tools) , Thrust , Fracture (Materials) , Fracture (Process)

Creep Rupture Due to Material Damage by Cavitation

A. R. Ragab

J. Eng. Mater. Technol. April 2002, 124(2): 199–205. doi: https://doi.org/10.1115/1.1446076

Abstract

View articletitled, Creep Rupture Due to Material Damage by Cavitation

Open the PDF for in another window

Topics: Creep , Rupture , Damage

Damage Zone Around Tip of an Interface Crack Between Rubber-Modified Epoxy Resin and Aluminum

Deok-Bo Lee, Toru Ikeda, Noriyuki Miyazaki, Nak-Sam Choi

J. Eng. Mater. Technol. April 2002, 124(2): 206–214. doi: https://doi.org/10.1115/1.1417980

Abstract

View articletitled, Damage Zone Around Tip of an Interface Crack Between Rubber-Modified Epoxy Resin and Aluminum

Open the PDF for in another window

Topics: Aluminum , Epoxy resins , Fracture (Materials) , Rubber , Stress , Damage , Particulate matter

A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds

M. A. Sutton, A. P. Reynolds, D.-Q. Wang, C. R. Hubbard

J. Eng. Mater. Technol. April 2002, 124(2): 215–221. doi: https://doi.org/10.1115/1.1429639

Abstract

View articletitled, A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds

Open the PDF for in another window

Topics: Aluminum , Friction , Neutron diffraction , Residual stresses , Stress , Welded joints , Stress concentration , Welding , Grain size

Effects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V

S. A. Namjoshi, V. K. Jain, S. Mall

J. Eng. Mater. Technol. April 2002, 124(2): 222–228. doi: https://doi.org/10.1115/1.1448323

Abstract

View articletitled, Effects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V

Open the PDF for in another window

Topics: Fatigue , Finite element analysis , Shot peening , Stress , Fracture (Materials) , Fatigue life , Tension

Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V

Alan R. Kallmeyer, Ahmo Krgo, Peter Kurath

J. Eng. Mater. Technol. April 2002, 124(2): 229–237. doi: https://doi.org/10.1115/1.1446075

Abstract

View articletitled, Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V

Open the PDF for in another window

Topics: Fatigue , Stress , Damage , Fatigue life

Micro and Macro Deformation of Single Crystal NiTi

Ken Gall, Martin L. Dunn, Yiping Liu, Paul Labossiere, Huseyin Sehitoglu, Yuriy I. Chumlyakov

J. Eng. Mater. Technol. April 2002, 124(2): 238–245. doi: https://doi.org/10.1115/1.1416684

Abstract

View articletitled, Micro and Macro Deformation of Single Crystal NiTi

Open the PDF for in another window

Topics: Compression , Crystals , Deformation , Dislocation motion , Martensitic transformations , Nickel titanium alloys , Stress , Temperature

On the Elastic Properties of PVD Coatings in Relation to Their Microstructure

I. Sevostianov, M. Kachanov, J. Ruud

J. Eng. Mater. Technol. April 2002, 124(2): 246–249. doi: https://doi.org/10.1115/1.1446074

Abstract

View articletitled, On the Elastic Properties of PVD Coatings in Relation to Their Microstructure

Open the PDF for in another window

Topics: Coatings , Elasticity , Stiffness , Stress , Compressive stress

On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part I—Analysis of Calibration Coefficients Obtained by a 3-D FEM Model

Jong-Ning Aoh, Chung-Sheng Wei

J. Eng. Mater. Technol. April 2002, 124(2): 250–258. doi: https://doi.org/10.1115/1.1416685

Abstract

View articletitled, On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part I—Analysis of Calibration Coefficients Obtained by a 3-D FEM Model

Open the PDF for in another window

Topics: Calibration , Drilling , Stress , Three-dimensional models , Finite element methods

Prediction of Forming Limit Diagram Based on Damage Coupled Kinematic-Isotropic Hardening Model Under Nonproportional Loading

C. L. Chow, X. J. Yang, E. Chu

J. Eng. Mater. Technol. April 2002, 124(2): 259–265. doi: https://doi.org/10.1115/1.1431908

Abstract

View articletitled, Prediction of Forming Limit Diagram Based on Damage Coupled Kinematic-Isotropic Hardening Model Under Nonproportional Loading

Open the PDF for in another window

Topics: Damage , Forming limit diagrams , Hardening , Kinematics , Necking , Anisotropy

Numerical Simulation of the Mechanically Coupled Cook-Off Experiment

Jobie M. Gerken, Joel G. Bennett, F. W. Smith

J. Eng. Mater. Technol. April 2002, 124(2): 266–273. doi: https://doi.org/10.1115/1.1429936

Abstract

View articletitled, Numerical Simulation of the Mechanically Coupled Cook-Off Experiment

Open the PDF for in another window

Topics: Computer simulation , Finite element analysis , Fracture (Materials) , Simulation , Stress , Fracture (Process) , Thermal expansion

A Technique for Deducing In-Plane Modulus and Coefficient of Thermal Expansion of a Supported Thin Film

Martin Y. M. Chiang, Chwan K. Chiang, Wen-li Wu

J. Eng. Mater. Technol. April 2002, 124(2): 274–277. doi: https://doi.org/10.1115/1.1448522

Abstract

View articletitled, A Technique for Deducing In-Plane Modulus and Coefficient of Thermal Expansion of a Supported Thin Film

Open the PDF for in another window

Topics: Elastic moduli , Temperature , Thermal expansion , Thermal stresses , Thin films

Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel

Gang Liu, Zhongqin Lin, Youxia Bao

J. Eng. Mater. Technol. April 2002, 124(2): 278–285. doi: https://doi.org/10.1115/1.1448523

Abstract

View articletitled, Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel

Open the PDF for in another window

Topics: Design , Optimization

Technical Papers

On the Optimal Damping of a Vibrating Shape Memory Alloy Rod

Application of a Unified Viscoplastic Model With Mixed Hardening to Ionic Solids and Metallic Alloys

Mechanical Behavior of a Cu-Al-Be Shape Memory Alloy Under Multiaxial Proportional and Nonproportional Loadings

Anisotropic Yield Locus Evolution During Cold Pilgering of Titanium Alloy Tubing

Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening

Three-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys

Some Plastic Deformation Modes for Indentation of Half Space by a Rigid Body With Serrated Surface as a Model of Roughness Transfer in Metal Forming

In Situ Matrix Shear Response Using Torsional Test Data of Fiber Reinforced Unidirectional Polymer Composites

Surface Texture, Fatigue, and the Reduction in Stiffness of Fiber Reinforced Plastics

Effect of Strain Gradients and Heterogeneity on Flow Strength of Particle Reinforced Metal-Matrix Composites

Analysis of High Volume Fraction Irregular Particulate Damping Composites

Relationship Between Rockwell C Hardness and Inelastic Material Constants

Residual Stress Measurement in a Ceramic-Metallic Graded Material

Development of an Analytical Model for Drilling Burr Formation in Ductile Materials

Creep Rupture Due to Material Damage by Cavitation

Damage Zone Around Tip of an Interface Crack Between Rubber-Modified Epoxy Resin and Aluminum

A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds

Effects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V

Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V

Micro and Macro Deformation of Single Crystal NiTi

On the Elastic Properties of PVD Coatings in Relation to Their Microstructure

On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part I—Analysis of Calibration Coefficients Obtained by a 3-D FEM Model

Prediction of Forming Limit Diagram Based on Damage Coupled Kinematic-Isotropic Hardening Model Under Nonproportional Loading

Numerical Simulation of the Mechanically Coupled Cook-Off Experiment

A Technique for Deducing In-Plane Modulus and Coefficient of Thermal Expansion of a Supported Thin Film

Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only