... % ] The three-point bend test setup Load versus displacement curves obtained from the flexural testing Bending strength and failure strain of the composite specimens with and without embedded sensor Failure of the different specimens after the short-beam strength test 06...

..., Part A , 38 ( 3 ), pp. 802 – 813 . 10.1016/j.compositesa.2006.08.005 04 04 2011 19 07 2011 22 07 2011 14 10 2011 14 10 2011 bending bending strength carbon fibre reinforced plastics carbon nanotubes filled polymers laminates nanocomposites nanofabrication...

... the fracture morphology of the tested specimens indicating proper dispersion of the xd-CNTs by fracture propagation and cleavage plane displacement. 10 03 2011 14 07 2011 22 07 2011 14 10 2011 14 10 2011 adhesion bending bending strength carbon nanotubes composite material...

... fracture surfaces compared to neat samples. Optical microscopy study revealed no significant physical change in outer surfaces of the samples conditioned up to a 90-day period. 10 03 2011 13 07 2011 22 07 2011 13 10 2011 13 10 2011 bending strength carbon fibre reinforced...

.... Phys.: Condens. Matter 0953-8984 , 13 ( 24 ), pp. 5585 – 5595 . 10.1088/0953-8984/13/24/304 16 09 2010 25 01 2011 23 03 2011 23 03 2011 bending strength compaction crystal microstructure density ductility fracture toughness optical microscopy plasma...

... , American Society for Testing and Materials , Philadelphia . 22 05 2009 13 08 2009 17 02 2010 17 02 2010 bending strength carbon fibre reinforced plastics compressibility ductility durability fabrics failure analysis filled polymers glass fibre reinforced plastics...

... oxygen-ion conductivity in a temperature range from 873 to 1273 K in air, impedance measurements were performed with alternating current (ac). Single-cell performance was confirmed under the condition of 26.2 Pa partial hydrogen pressure. Finally, to measure bending strength, three-point bending tests...

...-Plastic Foams ,” Int. J. Hydrogen Energy 0360-3199 10.1016/0360-3199(94)00087-G , 20 ( 5 ), pp. 401 – 403 . 17 05 2007 09 02 2008 11 06 2008 adhesion bending strength elastic moduli elasticity finite element analysis mechanical testing metal foams polymer foams...

... of the densification of HA. 13 08 2007 20 02 2008 11 06 2008 bending strength calcium compounds ceramics densification fracture toughness plasma materials processing sintering Young's modulus hydroxyapatite (HA) spark plasma sintering (SPS) sintering temperature sintering...

... transmission electron microscopy scanning electron microscopy hardness testing tensile testing impact testing bending strength hardness impact (mechanical) fracture surface morphology polypropylene nanocomposites montmorillonite (MMT) melt intercalation exfoliation embrittlement...

... residual stress on flexural strength of laser-treated samples was discussed. It was concluded that laser surface processing had significant effects on fracture behavior of flexure Si 3 N 4 samples. silicon compounds ceramics laser materials processing laser beam effects fracture grinding bending...

... structures polymer films embossing tensile testing impact testing tensile strength elastic constants fracture toughness bending bending strength dynamic testing 11 March 2004 28 December 2004 06 04 2005 Manuscript received March 11, 2004; revision received December 28, 2004...

.... , and Jackson , K. E. , 2000 , “ Size Effect in Scaled Fiber Composites Under Four-Point Flexural Loading ,” AIAA J. , 38 ( 6 ), pp. 1047 – 1054 . Wisnom , M. R. , 1991 , “ The Effect of Specimen Size on the Bending Strength of Unidirectional Carbon Fiber-Epoxy ,” Composite Structures , 18...

... titanium alloys nickel alloys shape memory effects corrosion fatigue bending strength infrared imaging fatigue testing Shape Memory Alloy Fatigue Titanium-Nickel Alloy Martensitic Transformation Rotating-Bending Low-Cycle Fatigue Frequency Fatigue Equation Atmosphere The shape...