Due to joint clearance, a parallel manipulator’s end-effector exhibits position and orientation (or collectively referred to as pose) errors of various degrees. This paper aims to provide a systematic study of the error analysis problem for a general parallel manipulator influenced by joint clearance. We propose an error prediction model that is applicable to planar or spatial parallel manipulators that are either overconstrained or nonoverconstrained. By formulating the problem as a standard convex optimization problem, the maximal pose error in a prescribed workspace can be efficiently computed. We present several numerical examples to show the applicability and the efficiency of the proposed method.

1.
Parenti-Castelli
,
V.
, and
Venanzi
,
S.
, 2002, “
On the Joint Clearance Effects in Serial and Parallel Manipulators
,”
Proceedings of the Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators
, pp.
215
223
.
2.
Parenti-Castelli
,
V.
, and
Venanzi
,
S.
, 2002, “
A New Deterministic Method for Clearance Influence Analysis in Spatial Mechanisms
,”
Proceedings of the 2002 ASME International Mechanical Engineering Congress and Exposition
.
3.
Venanzi
,
S.
, and
Parenti-Castelli
,
V.
, 2005, “
A New Technique for Clearance Influence Analysis in Spatial Mechanisms
,”
ASME J. Mech. Des.
0161-8458,
127
, pp.
446
455
.
4.
Meng
,
J.
,
Zhang
,
D.
, and
Li
,
Z.
, 2007, “
Assembly Problem of Overconstrained and Clearance-Free Parallel Manipulators
,”
International Conference on Robotics and Automation
.
5.
Ting
,
K.
,
Zhu
,
J.
, and
Watkins
,
D.
, 2000, “
The Effects of Joint Clearance on Position and Orientation Deviation of Linkages and Manipulators
,”
Mech. Mach. Theory
0094-114X,
35
, pp.
391
401
.
6.
Lin
,
P. D.
, and
Chen
,
J. F.
, 1992, “
Accuracy Analysis of Planar Linkages by the Matrix Method
,”
Mech. Mach. Theory
0094-114X,
27
, pp.
507
516
.
7.
Voglewede
,
P.
, and
Uphoff
,
I.
, 2004, “
Application of Workspace Generation Techniques to Determine the Unconstrained Motion of Parallel Manipulators
,”
ASME J. Mech. Des.
0161-8458,
126
, pp.
283
290
.
8.
Dhande
,
S.
, and
Chackraborty
,
J.
, 1978, “
Mechanical Error Analysis of Spatial Linkages
,”
ASME J. Mech. Des.
,
100
, pp.
732
738
. 0161-8458
9.
Mayourian
,
M.
, and
Rastegar
,
J.
, 1990, “
Stochastic Modeling of the Mechanical Behavior of Mechanisms in the Presence of Joint Clearances
,”
Proceedings of 1990 ASME Mechanisms Conference
, pp.
177
182
.
10.
Hartenberg
,
R.
, and
Denavit
,
J.
, 1964,
Kinematic Synthesis of Linkages
,
McGraw-Hill
,
New York
.
11.
Fogarasy
,
A.
, and
Smith
,
M.
, 1998, “
The Influence of Manufacturing Tolerances on the Kinematic Performance of Mechanisms
,”
Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci.
0954-4062,
212
, pp.
35
47
.
12.
Innocenti
,
C.
, 2002, “
Kinematic Clearance Sensitivity Analysis of Spatial Structures With Revolute Joints
,”
ASME J. Mech. Des.
0161-8458,
124
, pp.
52
57
.
13.
Parenti-Castelli
,
V.
, and
Venanzi
,
S.
, 2005, “
Clearance Influence Analysis on Mechanisms
,”
Mech. Mach. Theory
0094-114X,
40
, pp.
1316
1329
.
14.
Venanzi
,
S.
, 2004, “
Methods for Clearance Influence Analysis in Planar and Spatial Mechanisms
,” Ph.D. thesis, University of Bologna, Bologna, Italy.
15.
Murray
,
R.
,
Li
,
Z.
, and
Sastry
,
S.
, 1994,
A Mathematical Introduction to Robotic Manipulation
,
CRC
,
Boca Raton, FL
.
16.
Wang
,
H.
, and
Roth
,
B.
, 1989, “
Position Errors Due to Clearance in Journal Bearing
,”
ASME J. Mech., Transm., Autom. Des.
0738-0666,
111
, pp.
315
320
.
17.
Tsai
,
L.
, 1996, “
Kinematics of a Three-DOF Platform With Three Extensible Limbs
,”
Recent Advances in Robot Kinematics: Analysis and Control
,
J.
Lenaric
and
M. L.
Husty
, eds.,
Kluwer Academic Publishers
,
Dordrecht, Germany
, pp.
49
58
.
18.
Boyd
,
S.
, and
Vandenberghe
,
L.
, 2001,
Convex Optimization
, 1st ed.
Cambridge University Press
,
Cambridge, England
.
19.
Chablat
,
D.
, and
Wenger
,
P.
, 2003, “
Architecture Optimization of a 3-DOF Translational Parallel Mechanism for Machining Applications, the Orthoglide
,”
IEEE Trans. Rob. Autom.
1042-296X,
19
(
3
), pp.
403
410
.
20.
Han
,
C.
,
Kim
,
J.
,
Kim
,
J.
, and
Park
,
F.
, 2002, “
Kinematic Sensitivity Analysis of the 3-UPU Parallel Mechanism
,”
Mech. Mach. Theory
0094-114X,
37
, pp.
787
798
.
You do not currently have access to this content.