A passive control means to suppress flow-induced motions (FIM) of a rigid circular cylinder in the TrSL3, high-lift, flow regime is formulated and tested experimentally. The developed method uses passive turbulence control (PTC) consisting of selectively located roughness on the cylinder surface with thickness about equal to the boundary layer thickness. The map of “PTC-to-FIM,” developed in previous work, revealed robust zones of weak suppression, strong suppression, hard galloping, and soft galloping. PTC has been used successfully to enhance FIM for hydrokinetic energy harnessing using the VIVACE Converter. PTC also revealed the potential to suppress FIM to various levels. The map is flow-direction dependent. In this paper, the “PTC-to-FIM” map is used to guide development of FIM suppression devices that are flow-direction independent and hardly affect cylinder geometry. Experiments are conducted in the Low Turbulence Free Surface Water Channel of the University of Michigan on a rigid, horizontal, circular cylinder, suspended on springs. Amplitude and frequency measurements and broad field-of-view visualization reveal complex flow structures and their relation to suppression. Several PTC designs are tested to understand the effect of PTC roughness, location, coverage, and configuration. Gradual modification of PTC parameters, leads to improved suppression and evolution of a design reducing the VIV synchronization range. Over a wide range of high reduced velocities, VIV is fully suppressed. The maximum amplitude occurring near the system’s natural frequency is reduced by about 63% compared to the maximum amplitude of the smooth cylinder.
Selective Roughness in the Boundary Layer to Suppress Flow-Induced Motions of Circular Cylinder at 30,000<Re<120,000
- Views Icon Views
- Share Icon Share
- Search Site
Park, H., Bernitsas, M. M., and Ajith Kumar, R. (May 31, 2012). "Selective Roughness in the Boundary Layer to Suppress Flow-Induced Motions of Circular Cylinder at 30,000<Re<120,000." ASME. J. Offshore Mech. Arct. Eng. November 2012; 134(4): 041801. https://doi.org/10.1115/1.4006235
Download citation file: