Vortex-induced vibration (VIV) in oscillatory flow is experimentally investigated in the ocean basin. The test flexible cylinder was forced to harmonically oscillate in various combinations of amplitude and period with Keulegan-Carpenter () number between 26 and 178 in three different maximum reduced velocities, , , and separately. VIV responses at cross-flow (CF) direction are investigated using modal decomposition and wavelet transformation. The results show that VIV in oscillatory flow is quite different from that in steady flow; features, such as intermittent VIV, hysteresis, amplitude modulation, and mode transition (time sharing) are observed. Moreover, a VIV developing process including “building-up,” “lock-in,” and “dying-out” in oscillatory flow, is further proposed and analyzed.
Skip Nav Destination
Shanghai Jiao Tong University,
Centre for Ships and Ocean Structures, NTNU,
Article navigation
February 2014
Research-Article
Features of Vortex-Induced Vibration in Oscillatory Flow
Shixiao Fu,
Shixiao Fu
1
e-mail: shixiao.fu@sjtu.edu.cn
1Corresponding author.
Search for other works by this author on:
Jungao Wang,
Shanghai Jiao Tong University,
Jungao Wang
State Key Laboratory of Ocean Engineering
,Shanghai Jiao Tong University,
Shanghai
, China
Search for other works by this author on:
C. M. Larsen
Centre for Ships and Ocean Structures, NTNU,
C. M. Larsen
Department of Marine Technology
,Centre for Ships and Ocean Structures, NTNU,
Trondheim
, Norway
Search for other works by this author on:
Shixiao Fu
e-mail: shixiao.fu@sjtu.edu.cn
Jungao Wang
State Key Laboratory of Ocean Engineering
,Shanghai Jiao Tong University,
Shanghai
, China
Rolf Baarholm
Statoil
,Trondheim
, Norway
Jie Wu
Marintek
,Trondheim
, Norway
C. M. Larsen
Department of Marine Technology
,Centre for Ships and Ocean Structures, NTNU,
Trondheim
, Norway
1Corresponding author.
Contributed by the Ocean, Offshore, and Arctic Engineering Division of ASME for publication in the JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING. Manuscript received April 23, 2013; final manuscript received October 3, 2013; published online November 28, 2013. Assoc. Editor: Wei Qiu.
J. Offshore Mech. Arct. Eng. Feb 2014, 136(1): 011801 (10 pages)
Published Online: November 28, 2013
Article history
Received:
April 23, 2013
Revision Received:
October 3, 2013
Citation
Fu, S., Wang, J., Baarholm, R., Wu, J., and Larsen, C. M. (November 28, 2013). "Features of Vortex-Induced Vibration in Oscillatory Flow." ASME. J. Offshore Mech. Arct. Eng. February 2014; 136(1): 011801. https://doi.org/10.1115/1.4025759
Download citation file:
Get Email Alerts
Cited By
Strouhal Number for Vortex-Induced Vibration Excitation of Long Slender Structures
J. Offshore Mech. Arct. Eng (August 2022)
Heave Motion Induced Vortex-Induced Vibrations of a Full-Scale Steel Lazy Wave Riser
J. Offshore Mech. Arct. Eng (August 2022)
Tribo-Erosion Performance of GFRP Composite Panels in Both Offshore and Onshore Environmental Conditions
J. Offshore Mech. Arct. Eng (August 2022)
Active Absorption of Random Waves in Wave Flume Using Artificial Neural Networks
J. Offshore Mech. Arct. Eng (August 2022)
Related Articles
Prototype Reynolds Number Vortex-Induced Vibration Tests on a Full-Scale Rigid Riser
J. Offshore Mech. Arct. Eng (February,2018)
Hydrodynamics of Flexible Pipe With Staggered Buoyancy Elements Undergoing Vortex-Induced Vibrations
J. Offshore Mech. Arct. Eng (December,2018)
Full-Scale Fairing Qualification Tests
J. Offshore Mech. Arct. Eng (August,2017)
Sensitivity to Zone Covering of the Map of Passive Turbulence Control to Flow-Induced Motions for a Circular Cylinder at 30,000 ≤ Re ≤ 120,000
J. Offshore Mech. Arct. Eng (April,2017)
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Reference Method Accuracy and Precision (ReMAP): Phase I
Reference Method Accuracy and Precision (ReMAP): Phase 1 (CRTD Vol. 60)
Two Advanced Methods
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine