... fatigue fatigue testing fracture mechanics remaining life assessment shapes (structures) structural engineering finite element analysis tubular joints structural stress fatigue test offshore structures welded joints master S-N curve stress concentration factor Fatigue design...

... be guaranteed that all points at the circumference of the pipe at a certain location along the pipe axis undergo the same load cycle during one excitation cycle. A resonant bending fatigue setup to perform fatigue tests on pipe joints from 6 in. to 20 in. pipes was developed and built at the Laboratory...

... experimentally by strain gauges and numerically by finite element analysis using different types of elements. Fatigue testing was carried out and SN-curves were plotted according to the relevant stress as specified by the rules. In order to investigate the shakedown effect of residual stress, testing...

... to the actual yard practice. A series of fatigue test results is represented as S-N curves. Cyclic fatigue loadings were carefully considered similar to the actual sloshing loads. The effect of sloshing impacts is considered by selecting the stress ratio ( R = − 10 ) . The load levels have been determined based...

...Inge Lotsberg; Stig Wästberg; Hugo Ulle; Per Haagensen; Michael E. Hall Design S-N curves in design codes are based on fatigue test data, where the stress cycle is under external tension load. It is observed that during pile driving most of the stress cycle is compressive and the design procedure...

.... 10 07 2006 09 10 2007 18 07 2008 drag fatigue fatigue testing offshore installations structural engineering An important element in the design of jacket offshore structures with a significant dynamic behavior is the estimation of fatigue life. The simplest approach...

... rise to significant bending in the weld throat section. An example of such a detail is a doubler plate connection, which is often applied in connection with modifications of offshore structures. As a part of the present work, fatigue tests have been performed with test specimens fabricated...

...W. S. Kim; I. Lotsberg Five different specimens representing different typical welded connections in ship-shaped structures were fatigue-tested by HHI in Korea. The test data from the five different specimens for one loading condition were transferred into one hot spot S-N diagram. It was observed...

...-term condition of these elements is crucial for the structural safety of the floating structure. Inspection Planning Mooring Lines Fracture Mechanics Structural Reliability fatigue testing offshore installations inspection planning fracture mechanics risk analysis 02...

... is determined from fatigue test data. A closed-form equation is proposed for fatigue life estimation. The results obtained from a fatigue test and the calculated fatigue lives are compared. Kozljakov, V. V., 1992, “An Analysis of Structural Peculiarities and Causes of Severe Hull Damages of Bulk Carriers...

... in defect assessment. These data include the results of fatigue testing of both base material and welded joints in air and seawater with and without cathodic protection and at different R -ratios and test frequencies. The results suggest that for crack growth rates above 10 − 7 in. / cycle , crack growth...

... jointing fatigue fatigue cracks fatigue testing Fatigue is an important consideration for jackets in areas with more or less continuous storm loading such as the North Sea, and especially for dynamically sensitive platforms. The gradual development of cracks from fabrication defects to rupture...

... Technical Editor: C. Guedes Soares. 05 July 1998 02 March 2000 14 April 2000 inspection fatigue fatigue cracks fatigue testing crack detection oil technology A major failure mode of offshore jacket steel structures is the fatigue of tubular joints. Adequate safety...

.... 25 June 1999 03 March 2000 fatigue testing fracture toughness cracks welding failure (mechanical) Welded joints are of particular concern in a fatigue analysis, due to the likely stress concentrations, weld imperfections, and variable microstructure created during...