Fluidelastic instability is the most important vibration excitation mechanism for heat exchanger tube bundles subjected to cross-flow. Most of the available data on this topic have been reviewed from the perspective of the designer. Uniform definitions of critical flow velocity for instability, damping, natural frequency and hydrodynamic mass were used. Nearly 300 data points were assembled. We found that only data from experiments where all tubes are free to vibrate are valid from a design point of view. In liquids, fluid damping is important and should be considered in the formulation of fluidelastic instability. From a practical design point of view, we conclude that fluidelastic instability may be expressed simply in terms of dimensionless flow velocity and dimensionless mass-damping. There is no advantage in considering more sophisticated models at this time. Practical design guidelines are discussed.
Skip Nav Destination
Article navigation
Research Papers
Fluidelastic Instability of Heat Exchanger Tube Bundles: Review and Design Recommendations
M. J. Pettigrew,
M. J. Pettigrew
AECL Research, Chalk River Laboratories, Chalk River, Ontario, Canada
Search for other works by this author on:
C. E. Taylor
C. E. Taylor
AECL Research, Chalk River Laboratories, Chalk River, Ontario, Canada
Search for other works by this author on:
M. J. Pettigrew
AECL Research, Chalk River Laboratories, Chalk River, Ontario, Canada
C. E. Taylor
AECL Research, Chalk River Laboratories, Chalk River, Ontario, Canada
J. Pressure Vessel Technol. May 1991, 113(2): 242-256 (15 pages)
Published Online: May 1, 1991
Article history
Received:
December 31, 1990
Online:
June 17, 2008
Citation
Pettigrew, M. J., and Taylor, C. E. (May 1, 1991). "Fluidelastic Instability of Heat Exchanger Tube Bundles: Review and Design Recommendations." ASME. J. Pressure Vessel Technol. May 1991; 113(2): 242–256. https://doi.org/10.1115/1.2928752
Download citation file:
Get Email Alerts
Constraint Effect and Crack-Tip Plastic Zone of the Pipe With Internal Inclined Surface Cracks Under External Pressure
J. Pressure Vessel Technol (April 2025)
Research on the Accelerated Life Test Method for Gaskets and the Verification of the Accuracy of the Life Prediction
J. Pressure Vessel Technol (June 2025)
Optimization of High-Vapor Pressure Condensate Pipeline Commissioning Schemes in Large Uplift Environments
J. Pressure Vessel Technol (June 2025)
Technical Basis for Revising the Fatigue Crack Growth Rates for Ferritic Steels in the ASME Code Section XI
J. Pressure Vessel Technol (June 2025)
Related Articles
Prediction of Flow-Induced Vibrations in Tubular Heat Exchangers—Part II: Experimental Investigation
J. Pressure Vessel Technol (February,2009)
Mechanics of Pipes Conveying Fluids—Part II: Applications and Fluidelastic Problems
J. Pressure Vessel Technol (April,2011)
Random Excitation Forces in Heat Exchanger Tube Bundles
J. Pressure Vessel Technol (November,2000)
The Effects of Bundle Geometry on Heat Exchanger Tube Vibration in Two-Phase Cross Flow
J. Pressure Vessel Technol (November,2001)
Related Proceedings Papers
Related Chapters
Random Turbulence Excitation in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Hydrodynamic Mass, Natural Frequencies and Mode Shapes
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Stability and Range
Design and Analysis of Centrifugal Compressors