The behavior of a pipe bend, with bend factor and subjected to out-of-plane bending and internal pressure is studied, taking geometric and material nonlinearity into account, using the finite element code ABAQUS. Material behavior is taken as elastic-perfectly plastic. The distribution of stress and strain along the axial direction and across the thickness of the bend is studied, with and without internal pressure, at the onset of yielding and at instability. Before instability is reached, through-the-thickness yielding appears at many points. The loaded end of the bend is found to be the most severely strained cross section. The circumferential distribution of stress and strain, and its variation with increased moment loading are then investigated for that section, at internal pressure values of zero and 1200 psi.
Nonlinear Analysis of Pipe Bends Subjected to Out-of-Plane Moment Loading and Internal Pressure
Contributed by the Pressure Vessels and Piping Division and presented at the Pressure Vessels and Piping Conference, Seattle, Washington, July 23–27, 2000, of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the PVP Division, May 1, 2000; revised manuscript received July 24, 2000. Editor: S. Y. Zamrik.
- Views Icon Views
- Share Icon Share
- Search Site
Mourad , H. M., and Younan, M. Y. A. (July 24, 2000). "Nonlinear Analysis of Pipe Bends Subjected to Out-of-Plane Moment Loading and Internal Pressure ." ASME. J. Pressure Vessel Technol. May 2001; 123(2): 253–258. https://doi.org/10.1115/1.1310335
Download citation file: