This paper is the second part of the two-part review article presenting an overview of mechanics of pipes conveying fluid and related problems such as the fluid-elastic instability under conditions of turbulence in nuclear power plants. In the first part, different types of modeling, dynamic analysis and stability regimes of pipes conveying fluid restrained by elastic or inelastic barriers were described. The dynamic and stability behaviors of pinned-pinned, clamped-clamped, and cantilevered pipes conveying fluid together with curved and articulated pipes were discussed. Other problems such as pipes made of viscoelastic materials and active control of severe pipe vibrations were considered. The first part was closed by conclusions highlighting resolved and nonresolved controversies reported in the literature. The second part will address the problem of fluidelastic instability in single- and two-phase flows and fretting wear in process equipment, such as heat exchangers and steam generators. Connors critical velocity will be discussed as a measure of initiating fluidelastic instability. Vibro-impact of heat exchanger tubes and the random excitation by the cross-flow can produce a progressive damage at the supports through fretting wear or fatigue. Antivibration bar supports used to limit pipe vibrations are described. An assessment of analytical, numerical, and experimental techniques of fretting-wear problem of pipes in heat exchangers will be given. Other topics related to this part include remote impact analysis and parameter identification, pipe damage-induced by pressure elastic waves, the dynamic response and stability of long pipes, marine risers together with pipes aspirating fluid, and carbon nanotubes conveying fluid.
Issue Section:
Technology Reviews
Keywords:
bars,
dynamic response,
flow instability,
heat exchangers,
pipe flow,
pipes,
two-phase flow,
vibration control,
wear
Topics:
Cross-flow,
Flow (Dynamics),
Fluids,
Heat exchangers,
Pipes,
Stability,
Vibration,
Wear,
Water,
Boilers,
Damping,
Turbulence,
Two-phase flow,
Damage,
Excitation,
Dynamics (Mechanics)
1.
Price
, S. J.
, 2001, “An Investigation on the Use of Connors’ Equation to Predict Fluidelastic Instability in Cylinder Arrays
,” ASME J. Pressure Vessel Technol.
0094-9930, 123
, pp. 448
–453
.2.
Connors
, H. J.
, Jr., 1970, “Fluidelastic Vibration of Tube Arrays Excited by Cross-Flow
,” Proceedings of the ASME Flow-Induced Vibration in Heat Exchangers
, D. D.
Reiff
, ed., ASME
, New York
, pp. 42
–56
.3.
Connors
, H. J.
, Jr., 1981, “Flow-Induced Vibration and Wear of Steam Generator Tubes
,” Nucl. Technol.
0029-5450, 55
(2
), pp. 311
–331
.4.
Weaver
, D. S.
, and Koroyannakis
, D.
, 1982, “The Cross-Flow Response of a Tube Array in Water—A Comparison With the Same Array in Air
,” ASME J. Pressure Vessel Technol.
0094-9930, 104
, pp. 139
–146
.5.
Price
, S. J.
, 1995, “A Review of Theoretical Models for Fluidelastic Instability in Cross-Flow
,” J. Fluids Struct.
0889-9746, 9
, pp. 463
–518
.6.
Connors
, H. J.
, Jr., 1977, “Fluidelastic Vibration of Heat Exchanger Tube Arrays
,” ASME
Paper No. 77-DET-90.7.
Païdoussis
, M. P.
, 1983, “A Review of Flow-Induced Vibrations in Reactors and Reactor Components
,” Nucl. Eng. Des.
0029-5493, 74
, pp. 31
–60
.8.
Païdoussis
, M. P.
, 2006, “Real-Life Experiences With Flow-Induced Vibration
,” J. Fluids Struct.
0889-9746, 22
(6–7
), pp. 741
–755
.9.
Chen
, S. S.
, 1984, “Guidelines for the Instability Flow Velocity of Tube Arrays in Cross-Flow
,” J. Sound Vib.
0022-460X, 93
, pp. 439
–455
.10.
Chen
, S. S.
, 1990, “Unsteady Fluid Forces and Fluidelastic Vibration of a Group of Circular Cylinders
,” Argonne National Laboratory Report No. CONF-901109-8.11.
Païdoussis
, M. P.
, and Luu
, T. P.
, 1985, “Dynamics of a Pipe Aspirating Fluid, Such as Might Be Used in Ocean Mining
,” ASME J. Energy Resour. Technol.
0195-0738, 107
, pp. 250
–255
.12.
Price
, S. J.
, and Païdoussis
, M. P.
, 1985, “Fluidelastic Instability of a Full Array of Flexible Cylinders Subject to Cross-Flow
,” Proceedings of the ASME Tenth Biennial Conference on Mechanical Vibration and Noise: Fluid-Structure Interaction and Aerodynamic Damping
. Cincinnati, OH, pp. 171
–192
.13.
Weaver
, D.
, and Fitzpatrick
, J.
, 1988, “A Review of Cross-Flow Induced Vibrations in Heat Exchanger Tube Arrays
,” J. Fluids Struct.
0889-9746, 2
, pp. 73
–93
.14.
Chen
, S. S.
, and Chandra
, S.
, 1990, “Fluidelastic Instabilities in Tube Bundles Exposed to Non-Uniform Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Nashville, TN, Vol. 189
, pp. 65
–77
.15.
Price
, S. J.
, and Kuran
, S.
, 1990, “Fluidelastic Stability of a Rotated Square Array With Multiple Flexible Cylinders Subject to Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration Nashville
, Nashville, TN, Vol. 189
, pp. 107
–117
.16.
Pettigrew
, M. J.
, and Taylor
, C. E.
, 1991, “Fluid-Elastic Instability of Heat Exchanger Tube Bundles: Review and Design Recommendations
,” ASME J. Pressure Vessel Technol.
0094-9930, 113
, pp. 242
–256
.17.
Nie
, Q.
, Gu
, B.
, and Zhang
, M. X.
, 1992, “Fluidelastic Instability of Heat Exchanger Array
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Fluid Structure Interaction, Transient Thermal-Hydraulics, and Structural Mechanics
, New Orleans, LA, Vol. 231
, pp. 73
–79
.18.
Price
, S. J.
, Païdoussis
, M. P.
, and Mark
, B.
, 1992, “Flow Visualization in a 1.375 Pitch-to-Diameter Parallel Triangular Array Subject to Cross-Flow
,” Proceedings of the ASME WAM Heat Transfer Division on Fluid-Structure Interaction/Flow-Induced Vibration in Cylinder Arrays in Cross-Flow
Anaheim, CA, Vol. 230
, pp. 29
–38
.19.
Price
, S. J.
, Païdoussis
, M. P.
, and Al-Jabir
, A. M.
, 1993, “Current-Induced Fluidelastic Instabilities of a Multi-Tube Flexible Riser: Theoretical Results and Comparison With Experiments
,” ASME J. Offshore Mech. Arct. Eng.
0892-7219, 115
(4
), pp. 206
–212
.20.
Schröder
, K.
, and Gelbe
, H.
, 1999, “New Design Recommendations for Fluidelastic Instability in Heat Exchanger Tube Bundles
,” J. Fluids Struct.
0889-9746, 13
(3
), pp. 361
–379
.21.
Huang
, P.
, and Wang
, X.
, 1990, “Study on Several Factors to Influence Instability of Tube Arrays
,” Proceedings of the ASME WAM, Pressure Vessels and Piping Division: Vibration Control of Mechanical, Structural, and Fluid-Structural Systems
, Dallas, TX, Vol. 202
, pp. 75
–79
.22.
Porcher
, G.
, and De Langre
, E.
, 1997, “Friction-Based Model for Fluidelastic Forces Induced by Axial Flow
,” Proceedings of the ASME WAM Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 67
–74
.23.
Ishihara
, K.
, and Kitayama
, G.
, 2009, “Study on Influence of Tube Arrays on Fluid Elastic Instability
,” Nihon Kikai Gakkai Ronbunshu, C Hen (in Japanese)/Trans. Japan Soc. Mech. Eng. Part C
, 75
(751
), pp. 541
–549
.24.
Roberts
, B. W.
, 1962, “Low frequency, Self-Excited Vibration in a Row of Circular Cylinders Mounted in an Airstream
,” Ph.D. thesis, University of Cambridge, Cambridge, UK.25.
Blevins
, R. D.
, 1974, “Fluidelastic Whirling of a Tube Row
,” ASME J. Pressure Vessel Technol.
0094-9930, 98
, pp. 263
–267
.26.
Whiston
, G. S.
, and Thomas
, G. D.
, 1982, “Whirling Instabilities in Heat Exchanger Tube Arrays
,” J. Sound Vib.
0022-460X, 81
(1
), pp. 1
–31
.27.
Wambsganss
, M. W.
, Yang
, C. I.
, and Halle
, J.
, 1982, “Fluidelastic Instability in Shell and Tube Heat Exchangers: A Framework for a Prediction Method
,” Argonne National Laboratory Report No. ANL-83-8.28.
Halle
, H.
, Chenoweth
, J. M.
, and Wambsganss
, M. W.
, 1981, “Flow-Induced Tube Vibration Tests of Typical Industrial Heat Exchanger Configurations
,” ASME
Paper No. 81-DET-37.29.
Halle
, H.
, Chenoweth
, J. M.
, and Wambsganss
, M. W.
, 1984, “Flow-Induced Tube Vibration Thresholds in Heat Exchangers From Shell Side Water Tests
,” Proceedings of the ASME WAM Computational Aspects of Flow-Induced Vibration Symposium on Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 17
–32
.30.
Halle
, H.
, Chenoweth
, J. M.
, and Wambsganss
, M. W.
, 1989, “Shell Side Water Flow-Induced Tube Vibration in Heat Exchanger Configurations With Tube Pitch-to-Diameter Ratio of 1.42
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 441
–449
.31.
Fujita
, K.
, Nakamura
, T.
, Mureithi
, N. W.
, and Ichioka
, T.
, 1995, “Recent Topics on Cross-Flow Induced Vibration of Tube Arrays
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Honolulu, HI, Vol. 298
, pp. 45
–54
.32.
Chenoweth
, J. M.
, 1984, “FIVER—A New Design Concept to Prevent Tube Damage From Flow-Induced Vibration in Shell-and-Tube Heat Exchangers
,” Proceedings of the ASME WAM Symposium on Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 33
–43
.33.
Mulcahy
, T. M.
, Halle
, H.
, and Wambsganss
, M. W.
, 1986, “Prediction of Tube Bundle Instabilities: Case Studies
,” Argonne National Laboratory Report No. ANL-86-49.34.
Dutta
, K.
, 1987, “Design Evaluation of Flow-Induced Vibrations for a Large Shell and Tube Type Nuclear Heat Exchanger
,” Proceedings of the ASME 11th Biennial Conference on Mechanical Vibration and Noise
, Boston, MA, Vol. DE-7
, pp. 165
–172
.35.
Longatte
, E.
, Bendjeddou
, Z.
, and Souli
, M.
, 2003, “Numerical Simulation of Tube Bundle Vibrations in Cross-Flows
,” Proceedings of the ASME WAM Applied Mechanics Division Fifth International Symposium on Fluid-Structure Interaction, Aeroelasicity, Flow-Induced Vibration and Noise
, Pt. A, Vol. 253
, No. 1, pp. 671
–679
.36.
Bendjeddou
, Z.
, Adobes
, A.
, Longatte
, E.
, and Soul
, M.
, 2003, “Steam Generator Tube Vibrations: Experimental Determination Versus ALE Computation of Fluidelastic Forces
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Emerging Technology in Fluids, Structures, and Fluid-Structure Interactions
, Cleveland, OH, Vol. 460
, pp. 219
–223
.37.
Pettigrew
, M. J.
, and Gorman
, D. J.
, 1977, “Experimental Studies on Flow-Induced Vibration to Support Steam Generator Design, Part 3: Vibration of Small Tube Bundles in Liquid and Two-Phase Cross-Flow
,” Proceedings of the UKAEA/NPL International Symposium on Vibration Problems in Industry
, Keswick, UK, Paper No. 426; also, Atomic Energy of Canada Limited Report No. AECL-5804.38.
Pettigrew
, M. A.
, and Gorman
, D. J.
, 1978, “Vibration of Heat Exchanger Components In Liquid And Two-Phase Cross-Flow
,” Proceedings of the BENS International Conference on Vibration in Nuclear Power Plants
, Keswick, UK, Paper No. 2.3; also, AECL Report No. 6184.39.
Pettigrew
, M. J.
, and Gorman
, D. J.
, 1981, “Vibration of Heat Exchanger Tube Bundles in Liquid and Two-Phase Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Division (Publication) PVP
, Denver, CO, PVP Vol. 52
, pp. 89
–110
.40.
Pettigrew
, M. J.
, Sylvestre
, Y.
, and Campagna
, A. O.
, 1978, “Vibration Analysis of Heat Exchanger and Steam Generator Designs
,” Nucl. Eng. Des.
0029-5493, 48
(1
), pp. 97
–115
.41.
Chen
, S. S.
, 1989, “Some Issues Concerning Fluid-Elastic Instability of a Group of Circular Cylinders in Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
, pp. 507
–518
.42.
Chen
, S. S.
, 1983, “Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow, Part 1: Theory
,” ASME J. Vib., Acoust., Stress, Reliab. Des.
0739-3717, 105
, pp. 51
–58
.43.
Chen
, S. S.
, 1983b, “Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow, Part 2: Numerical Results and Discussions
,” ASME J. Vib., Acoust., Stress, Reliab. Des.
0739-3717, 105
, pp. 253
–260
.44.
Eisinger
, F. L.
, Rao
, M. S. M.
, and Steininger
, D. A.
, 1989, “Numerical Simulation Of Fluidelastic Instability Of Multispan Tubes Partially Exposed To Cross-Flow
,” Proceedings of the Tenth International Conference on Structural Mechanics in Reactor Technology
, Anaheim, CA, Vol. T
, pp. 45
–57
.45.
Myshinskiym
, E.
, and Sviadosch
, V.
, 1990, “Quasi-Stationary Approach to the Evaluation of Vibration of Tube Bundles in Heat-Exchangers in the Presence of Fluidelastic Instability
,” Proceedings of the ASME AWM on Pressure Vessels and Piping, Vibration Control of Mechanical, Structural, and Fluid-Structural Systems
, Dallas, TX, Vol. 202
, pp. 59
–67
.46.
Axisa
, F.
, Antunes
, J.
, and Villard
, B.
, 1990, “Random Excitation of Heat Exchanger Tubes by Cross-Flows
,” J. Fluids Struct.
0889-9746, 4
, pp. 321
–341
.47.
Sauve
, R.
, 1996, “A Computational Time Domain Approach to Fluidelastic Instability for Nonlinear Tube Dynamics
,” Proceedings of the ASME Pressure Vessels and Piping Conference, Part 1 (of 2) Division (Publication) PVP, Symposium on Flow Induced Vibrations
, Montreal, Canada, Vol. 328
, pp. 327
–335
.48.
Eisinger
, F. L.
, Rao
, M. S. M.
, Steininger
, D. A.
, and Haslinger
, K. H.
, 1995, “Numerical Simulation of Cross-Flow-Induced Fluidelastic Vibration of Tube Arrays and Comparison With Experimental Results
,” ASME J. Pressure Vessel Technol.
0094-9930, 117
(1
), pp. 31
–39
.49.
Violette
, R.
, Pettigrew
, M. J.
, and Mureithi
, N. W.
, 2006, “Fluidelastic Instability of an Array of Tubes Preferentially Flexible in the Flow Direction Subjected to Two-Phase Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 128
(1
), pp. 148
–159
.50.
Khosravian
, N.
, and Rafii-Tabar
, H.
, 2007, “Computational Modeling of the Flow of Viscous Fluids in Carbon Nanotubes
,” J. Phys. D: Appl. Phys.
0022-3727, 40
(22
), pp. 7046
–7052
.51.
Eisinger
, F. L.
, and Rao
, M. S. M.
, 1997, “Effect of Tube-To-Tube Ties on Fluidelastic Instability of Tube Arrays Exposed to Cross-Flow
,” Proceedings of the ASME Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Aerospace Division, Dallas, TX, Vol. 53-2
, pp. 221
–228
.52.
Parrondo
, J. L.
, Santolaria
, C.
, and Weaver
, D. S.
, 1997, “Fluidelastic Instability in a Tube Array Subjected to Partial Admission Water Cross-Flow
,” J. Fluids Struct.
0889-9746, 11
(2
), pp. 159
–181
.53.
Savkar
, S. D.
, 1987, “Flow-Induced Vibrations in Heat Exchangers—An Overview
,” Proceedings of the Heat Transfer in High Technology Power Engineering Processes
, Hemisphere
, San Diego, CA
, pp. 433
–443
.54.
Chen
, S. S.
, 1987, “A General Theory for Dynamic Instability for Tube Arrays in Cross-Flow
,” J. Fluids Struct.
0889-9746, 1
, pp. 35
–53
.55.
Chen
, S. S.
, and Jendrzejczyk
, J.
, 1987, “Fluid Excitation Forces Acting on a Square Tube Array
,” ASME J. Fluids Eng.
0098-2202, 109
, pp. 415
–423
.56.
Weaver
, D. S.
, Ziada
, S.
, Sun
, Z.
, and Feenstra
, P.
, 2001, “The Effect of Platen Fins on the Flow-Induced Vibrations of an In-Line Tube Array
,” ASME J. Pressure Vessel Technol.
0094-9930, 123
(4
), pp. 437
–441
.57.
Abdullah
, Z.
, Weaver
, D. S.
, Feenstra
, P.
, Gorog
, P.
, Keiser
, J.
, Swindeman
, R.
, and Aramayo
, G.
, 2001, “A Study of Flow Induced Vibration Failures in a Large Heat Exchanger
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration-2001: Cross-Flow Heat Exchangers
, Atlanta, GA, Vol. 420I
, pp. 1
–6
.58.
Feenstra
, P.
, Weaver
, D. S.
, and Abdullah
, Z.
, 2004, “Fluid-Elastic Instability in a Tube Array Subjected to Uniform And Jet Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 126
(2
), pp. 269
–274
.59.
Weaver
, D. S.
, and Parrondo
, J. L.
, 1990, “Fluidelastic Instability in Multispan Heat Exchanger Tube Arrays
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Nashville, TN, Vol. 189
, pp. 79
–85
.60.
Leyh
, T.
, Kleist
, H.
, and Gelbe
, H.
, 1990, “Flow-Induced Vibration in an Ideal and in a Real Heat-Exchanger Tube Bundle
,” Proceedings of the ASME Pressure Vessels and Piping Conference: Flow-Induced Vibration
, Nashville, TN, Vol. 189
, pp. 165
–170
.61.
Yetisir
, M.
, and Weaver
, D. S.
, 1993, “An Unsteady Theory for Fluidelastic Instability in an Array of Flexible Tubes in Cross-Flow, Part 1: Theory
,” J. Fluids Struct.
0889-9746, 7
, pp. 751
–766
.62.
Yetisir
, M.
, and Weaver
, D. S.
, 1993, “An Unsteady Theory for Fluidelastic Instability in an Array of Flexible Tubes in Cross-Flow, Part II: Results and Comparison With Experiments
,” J. Fluids Struct.
0889-9746, 7
, pp. 767
–782
.63.
Taylor
, C. E.
, Pettigrew
, M. J.
, Dickinson
, T. J.
, Currie
, I. G.
, and Vidalou
, P.
, 1997, “Vibration Damping in Multispan Heat Exchanger Tubes
,” Proceedings of the ASME WAM, Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 201
–208
.64.
Caillaud
, S.
, De Langre
, E.
, and Piteau
, P.
, 2000, “Measurement of Critical Velocities for Fluidelastic Instability Using Vibration Control
,” ASME J. Vibr. Acoust.
0739-3717, 122
(4
), pp. 341
–345
.65.
Caillaud
, S.
, De Langre
, E.
, and Baj
, F.
, 2003, “Active Vibration Control for the Measurement of Fluidelastic Effects
,” ASME J. Pressure Vessel Technol.
0094-9930, 125
(2
), pp. 165
–170
.66.
Ichioka
, T.
, Kawata
, Y.
, Nakamura
, T.
, Izumi
, H.
, Kobayashi
, T.
, and Takamtsu
, H.
, 1995, “Research on Fluidelastic Vibration of Cylinder Arrays by Computational Fluid Dynamics (1st Report, Analysis on Two Cylinders and a Cylinder Row)
,” Nippon Kikai Gakkai Ronbunshu, B Hen (in Japanese)/Trans. Japan Soc. Mech. Eng. Part B
, 61
(582
), pp. 503
–509
.67.
Lam
, K.
, Jiang
, G. D.
, Liu
, Y.
, and So
, R. M. C.
, 2006, “Simulation of Cross-Flow-Induced Vibration of Cylinder Arrays by Surface Vorticity Method
,” J. Fluids Struct.
0889-9746, 22
(8
), pp. 1113
–1131
.68.
Lever
, J. H.
, and Rzenkowski
, G.
, 1992, Dependence of Post-Stable Fluidelastic Behavior on the Degrees-of-Freedom of a Tube Bundle
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division (Publication) PVP on Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol. 242
, pp. 167
–187
.69.
Rzentkowski
, G.
, and Lever
, J. H.
, 1998, “An Effect of Turbulence on Fluid-Elastic Instability in Tube Bundles: A Nonlinear Analysis
,” J. Fluids Struct.
0889-9746, 12
(5
), pp. 561
–590
.70.
Weaver
, D. S.
, Ziada
, S.
, Au-Yang
, M. K.
, Chen
, S. S.
, Païdoussis
, M. P.
, and Pettigrew
, M. J.
, 2000, “Flow-Induced Vibrations in Power and Process Plant Components Progress and Prospects
,” ASME J. Pressure Vessel Technol.
0094-9930, 122
, pp. 339
–348
.71.
Price
, S. J.
, and Zhan
, M. L.
, 1991, “Fluidelastic Behavior of a Normal Triangular Array Subject to Cross-Flow
,” J. Fluids Struct.
0889-9746, 5
, pp. 259
–278
.72.
Austermann
, R.
, Popp
, K.
, and Kurnik
, W.
, 1992, “Fluidelastic Instabilities and Bifurcations in a Rotated Triangular Tube Array Subjected to Cross-Flow: Part One—Experimental Results
,” Proceedings of the ASME WAM Pressure Vessels and Piping Conference on Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol. 242
, pp. 31
–41
.73.
Lever
, J. H.
, and Weaver
, D. S.
, 1982, “A Theoretical Model for the Fluidelastic Instability in Heat Exchanger Tube Bundles
,” ASME J. Pressure Vessel Technol.
0094-9930, 104
, pp. 147
–158
.74.
Lever
, J. H.
, and Weaver
, D. S.
, 1986, “On the Stability of Heat Exchanger Tube Bundles. I. Modified Theoretical Model
,” J. Sound Vib.
0022-460X, 107
(3
), pp. 375
–392
.75.
Lever
, J. H.
, and Weaver
, D. S.
, 1986, “On the Stability of Heat Exchanger Tube Bundles. II. Numerical Results and Comparison With Experiments
,” J. Sound Vib.
0022-460X, 107
(3
), pp. 393
–410
.76.
Ziada
, S.
, and Oengoren
, A.
, 2000, “Flow Periodicity and Acoustic Resonance in Parallel Triangle Tube Bundles
,” J. Fluids Struct.
0889-9746, 14
(2
), pp. 197
–219
.77.
Li
, M.
, and Weaver
, D. S.
, 1997, “Fluidelastic Instability Model With an Extension to Full Flexible Multi-Span Tube Arrays
,” Proceedings of the ASME Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Aerospace Division (Publication) AD, Vol. 53-2
, pp. 163
–172
.78.
Fischer
, M.
, and Strohmeier
, K.
, 2002, “Advances in Application of Numerical Simulation of Fluid Flow in Tube Bundle Heat Exchangers
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Shock, Wave Propagation, Tube Bundle Dynamics and Structural Dynamics
, Vancouver, BC, Vol. 446
, No. 2, pp. 219
–224
.79.
Mureithi
, N. W.
, Zhang
, C.
, and Pettigrew
, M. J.
, 2005, “Fluidelastic Instability Tests on an Array of Tubes Preferentially Flexible in the Flow Direction
,” J. Fluids Struct.
0889-9746, 21
, pp. 75
–87
.80.
Granger
, S.
, and Païdoussis
, M. P.
, 1996, “An Improvement to the Quasi-Steady Model With Application to Cross-Flow-Induced Vibration of Tube Array
,” J. Fluid Mech.
0022-1120, 320
, pp. 163
–184
.81.
Price
, S. J.
, and Païdoussis
, M. P.
, 1983, “Fluidelastic Instability of a Double Row of Circular Cylinders Subject to Cross-Flow
,” ASME J. Vib., Acoust., Stress, Reliab. Des.
0739-3717, 105
, pp. 59
–66
.82.
Price
, S. J.
, and Païdoussis
, M. P.
, 1984, “An Improved Mathematical Model for the Stability of Cylinder Rows Subject to Cross-Flow
,” J. Sound Vib.
0022-460X, 97
, pp. 615
–640
.83.
Price
, S. J.
, and Païdoussis
, M. P.
, 1986, “A Constrained-Mode Analysis of the Fluidelastic Instability of a Double Row of Flexible Circular Cylinders Subject to Cross-Flow: A Theoretical Investigation of System Parameters
,” J. Sound Vib.
0022-460X, 105
, pp. 121
–142
.84.
Meskell
, C.
, 2005, “On The Underlying Fluid Mechanics Responsible For Damping Controlled Fuidelastic Instability in Tube Arrays
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Fluid-Structure Interaction, PVP2005
, Denver, CO, Vol. 4
, pp. 573
–581
.85.
Meskell
, C.
, 2009, “A New Model for Damping Controlled Fluidelastic Instability in Heat Exchanger Tube Arrays
,” Proc. Inst. Mech. Eng., A
, 223
(4
), pp. 361
–368
.86.
Meskell
, C.
, and Eret
, P.
, 2006, “Estimation of Nonlinear Damping Parameters in a Normal Triangular Array Subject to Fluidelastic Instability
,” ASME
Paper No. PVP2006/ICPVT-11.87.
Meskell
, C.
, and Fitzpatrick
, J.
, 2003, “Investigation of the Nonlinear Behavior of Damping Controlled Fluidelastic Instability in a Normal Triangular Tube Array
,” J. Fluids Struct.
0889-9746, 18
(5
), pp. 573
–593
.88.
Mahon
, J.
, and Meskell
, C.
, 2006, “Coupling Between Acoustic Resonance and Fluidelastic Instability in Normal Triangular Tube Arrays
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Vancouver, BC, Canada, Vol. 9
, pp. 521
–529
.89.
Mahon
, J.
, and Meskell
, C.
, 2009a, “Interaction Between Acoustic Resonance and Fluidelastic Instability in a Normal Triangular Tube Array
,” ASME J. Pressure Vessel Technol.
0094-9930, 131
(1
), p. 011303
.90.
Mahon
, J.
, and Meskell
, C.
, 2009b, “Investigation of the Underlying Cause of the Interaction Between Acoustic Resonance and Fluidelastic Instability in Normal Triangular Tube Arrays
,” J. Sound Vib.
0022-460X, 324
(1–2
), pp. 91
–106
.91.
Chen
, S. S.
, Jendrzejckyk
, J. A.
, and Wambsganss
, M. W.
, 1983, “Tube Vibration in a Half-Scale Sector Model of a Helical Tube Steam Generator
,” J. Sound Vib.
0022-460X, 91
(4
), pp. 539
–569
.92.
Lumsden
, R. H.
, and Weaver
, D. S.
, 2007, “The Effect of Fins on Fluidelastic Instability in In-Line and Rotated Square Arrays
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Fluid-Structure Interaction
, San Antonio, TX, Vol. 4
, pp. 465
–473
.93.
Au-Yang
, M. K.
, and Burgess
, J. A.
, 2007, “Critical Velocity of a Nonlinearly Supported Multispan Tube Bundle
,” ASME J. Pressure Vessel Technol.
0094-9930, 129
, pp. 535
–540
.94.
Reichel
, C.
, and Strohmeier
, K.
, 2009, “Simulation of Tube Bundle Vibrations: A Numerical 3D-Method
,” ASME
Paper No. PVP2009-77530.95.
Kassera
, V.
, 1996, “Development of a Numerical Calculation Tool for Vibrations of Tube Bundles in Cross-Flow
,” Ph.D. thesis, Institute for Pressure Vessel and Plant Design, Technical University of Munich, Germany, in German.96.
Kassera
, V.
, and Strohmeier
, K.
, 1997, “Simulation of Tube Bundle Vibrations Induced by Cross-Flow
,” J. Fluids Struct.
0889-9746, 11
(8
), pp. 909
–928
.97.
Lin
, T. K.
, and Yu
, M. H.
, 2001, “Simulation of Flow Induced Vibrations of Tube Bundle in Cross-Flow
,” Chin. J. Mech., Ser. A
1680-0893, 17
(3
), pp. 139
–147
.98.
De Motta
, J. C. B.
, and Baj
, F.
, 2009, “Numerical Study of Tube Array Vibrations Under Cross-Flow
,” ASME
Paper No. PVP2009-77774.99.
Gillen
, S.
, and Meskell
, C.
, 2009, “Numerical Analysis Of Fluidelastic Instability In A Normal Triangular Tube Array
,” ASME
Paper No. PVP2009-77806.100.
Païdoussis
, M. P.
, 1966, “Dynamics of Flexible Slender Cylinder in Axial Flow, Part 1: Theory
,” J. Fluid Mech.
0022-1120, 26
(04
), pp. 717
–736
.101.
Païdoussis
, M. P.
, 1966, “Dynamics of Flexible Slender Cylinder in Axial Flow, Part 2: Experiments
,” J. Fluid Mech.
0022-1120, 26
(04
), pp. 737
–751
.102.
Païdoussis
, M. P.
, Curling
, L. R.
, and Gagnon
, J. O.
, 1982, “Experiments on Fluidelastic Instability of Cylinder Clusters in Axial Flow
,” ASME J. Fluids Eng.
0098-2202, 104
(3
), pp. 342
–349
.103.
Païdoussis
, M. P.
, and Suss
, S.
, 1977, “Stability of a Cluster of Flexible Cylinders in Bounded Axial Flow
,” ASME J. Appl. Mech.
0021-8936, 44
, pp. 401
–408
.104.
Païdoussis
, M. P.
, and Pettigrew
, M. J.
, 1979, “Dynamics of Flexible Cylinders in Axisymmetrically Confined Axial Flow
,” ASME J. Appl. Mech.
0021-8936, 46
, pp. 37
–44
.105.
Païdoussis
, M. P.
, Chaubernard
, J. P.
, Genadry
, M. R.
, and El Barbir
, K. N.
, 1983, “Dynamics of a Cluster of Flexibly Interconnected Cylinders, Part 2: In Vacuum
,” ASME J. Appl. Mech.
0021-8936, 50
, pp. 421
–428
.106.
Païdoussis
, M. P.
, Chaubernard
, J. P.
, Genadry
, M. R.
, and El Barbir
, K. N.
, 1983, “Dynamics of a Cluster of Flexibly Interconnected Cylinders, Part 2: In Axial Flow
,” ASME J. Appl. Mech.
0021-8936, 50
, pp. 429
–435
.107.
Vendhan
, C. P.
, Bhattacharyya
, S. K.
, and Sudarsan
, K.
, 1997, “Stability Characteristics of Slender Flexible Cylinders in Axial Flow by the Finite Element Method
,” J. Sound Vib.
0022-460X, 208
(4
), pp. 587
–601
.108.
Païdoussis
, M. P.
, 1979, “The Dynamics of Clusters of Flexible Cylinders in Axial Flow: Theory and Experiments
,” J. Sound Vib.
0022-460X, 65
, pp. 391
–417
.109.
Païdoussis
, M. P.
, 1980, “Flow-Induced Vibrations in Nuclear Reactors and Heat Exchangers: Practical Experiences and State of Knowledge
,” Practical Experiences With Flow-Induced Vibrations
, Springer
, Berlin
, pp. 1
–81
.110.
Païdoussis
, M. P.
, 1981, “Fluidelastic Vibration of Cylinder Arrays in Axial and Cross-Flow: State of the Art
,” J. Sound Vib.
0022-460X, 76
, pp. 329
–360
.111.
Païdoussis
, M. P.
, 2004, Fluid-Structure Interactions: Slender Structures and Axial Flow
, Vol. 2
, Academic
, London
.112.
Modarres-Sadeghi
, Y.
, Païdoussis
, M. P.
, and Semler
, C.
, 2005, “A Nonlinear Model for an Extensible Slender Cylinder Subjected to Axial Flow
,” J. Fluids Struct.
0889-9746, 21
, pp. 609
–627
.113.
Modarres-Sadeghi
, Y.
, Païdoussis
, M. P.
, Semler
, C.
, and Grinevich
, E.
, 2008, “Experiments on Vertical Slender Flexible Cylinders Clamped at Both Ends and Subjected to Axial Flow
,” Philos. Trans. R. Soc. London, Ser. A
0962-8428, 366
, pp. 1275
–1296
.114.
Hara
, F.
, 1977, “Two-Phase Flow-Induced Vibrations in a Horizontal Piping System
,” Bull. JSME
0021-3764, 20
, pp. 419
–427
.115.
Hara
, F.
, 1980, “Two-Phase Flow-Induced Parametric Vibration in Structural Systems: Pipes and Nuclear Pins
,” The Institute of Industrial Sciences, The University of Tokyo 20(4), Serial No. 183.116.
Remy
, F. N.
, 1982, “Flow Induced Vibration of Tube Bundles in Two-Phase Cross-Flow
,” Proceedings of the Third International Conference on Vibration in Nuclear Plant
, Keswick, UK, Vol. 1
, pp. 135
–161
.117.
Pettigrew
, M. J.
, and Taylor
, C. E.
, 1994, “Two-Phase Flow Induced Vibration: An Overview
,” ASME J. Pressure Vessel Technol.
0094-9930, 116
, pp. 233
–253
.118.
Pettigrew
, M. J.
, Taylor
, C. E.
, Fisher
, N. J.
, Yetisir
, M.
, and Smith
, B. A. W.
, 1998, “Flow-Induced Vibration: Recent Findings and Open Questions
,” Nucl. Eng. Des.
0029-5493, 185
(2–3
), pp. 249
–276
.119.
Pettigrew
, M. J.
, Carlucci
, L. N.
, Taylor
, C. E.
, and Fisher
, N. J.
, 1991, “Flow-Induced Vibration and Related Technologies in Nuclear Components
,” Nucl. Eng. Des.
0029-5493, 131
, pp. 81
–100
.120.
Khushnood
, S.
, Khan
, Z. M.
, Malik
, M. A.
, Koreshi
, Z. U.
, and Khan
, M. A.
, 2004, “A Review of Heat Exchanger Tube Bundle Vibrations in Two-Phase Cross-Flow
,” Nucl. Eng. Des.
0029-5493, 230
(1–3
), pp. 233
–251
.121.
Goyder
, H. G. D.
, 1988, “Fluidelastic Instability and Buffeting of Heat Exchanger Tube Bundles Due to Single and Two-Phase Flows
,” Proceedings of the International Symposium on Flow-Induced Vibration Noise: Flow-Induced Vibration of Cylinder Arrays Cross-Flow
, Chicago, IL, pp. 151
–168
.122.
Teh
, C. E.
, and Goyder
, H. G. D.
, 1988, “Data for the Fluidelastic Instability of Heat Exchanger Tube Bundles
,” Proceedings of the International Conference on Flow Induced Vibration Noise: Flow-Induced Vibration and Noise in Cylinder Arrays
, Chicago, IL, pp. 77
–94
.123.
Goyder
, H. G. D.
, 1992, “Practical Method for Assessing Tube Vibrations in Heat Exchangers
,” Proceedings of the ASME WAM Heat Transfer Division on FSI/FIV Cylinder Arrays in Cross-Flow
, Anaheim, CA, Vol. 230
, pp. 237
–259
.124.
Goyder
, H. G. D.
, 2002, “Flow-Induced Vibration in Heat Exchangers
,” Chem. Eng. Res. Des.
0263-8762, 80
(3
), pp. 226
–232
.125.
Mitra
, D.
, Adinolfi
, P.
, and Alquaddoomi
, O.
, 2002, Development of an Experimental Apparatus for Studying Fluid-Elastic Instability in Tube-Arrays
, Proceedings of the American Nuclear Society Conference
, Hollywood, FL, Vol. 86
, pp. 234
–235
.126.
Mitra
, D.
, Dhir
, V. K.
, and Catton
, I.
, 2003, “New Experimental Data and Analysis for Two-Phase Flow-Induced Vibration of Tube Bundles: Preliminary Results
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Cleveland, OH, Vol. 465
, pp. 23
–30
.127.
Marn
, J.
, 1994, “On Optimization of Initial Conditions in Vorticity Formulation of Cross-Flow Induced Vibrations
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Minneapolis, MN, Vol. 273
, pp. 289
–296
.128.
Marn
, J.
, and Catton
, I.
, 1996, “On Analysis of Fluidelastic Instability in Air-Water Mixture
,” ASME J. Pressure Vessel Technol.
0094-9930, 118
(2
), pp. 188
–193
.129.
Bottoni
, M.
, and Sengpiel
, W.
, 1992, “Theoretical and Pragmatic Modeling of Governing Equations for a Two-Phase Flow in Bubbly and Annular Flow Regimes
,” Argonne National Laboratory Report No. ANL/MCT/CP-77705.130.
Ueno
, T.
, Tomomatsu
, K.
, Takamatsu
, H.
, and Nishikawa
, H.
, 1997, “Void Fraction and Interface Velocity in Gas-Liquid Upward Two-Phase Flow Across Tube Bundles
,” Proceedings of the Eighth International Topical Meeting on Nuclear Reactor Thermal-Hydraulics: New Horizons in Nuclear Reactor Thermal-Hydraulics
, Kyoto, Japan, Vol. 1
, pp. 229
–238
.131.
Joo
, Y.
, 1994, “Experimental Study of Fluidelastic Instability and Draft Force on a Tube in Two-Phase Cross-Flow
, Ph.D. thesis, University of California, Los Angeles.132.
Joo
, Y.
, and Dhir
, V. K.
, 1995, “On the Mechanism of Fluidelastic Instability of a Tube Placed in an Array Subjected to Two-Phase Cross-Flow
,” ASME J. Fluids Eng.
0098-2202, 117
(4
), pp. 706
–712
.133.
Boucher
, K.
, and Taylor
, C.
, 1996, “Tube Support Effectiveness and Wear Damage Assessment in the U-Bend Region of Nuclear Steam Generators
,” Proceedings of the ASME Pressure Vessel and Piping Conference
, Montreal, Canada, Vol. 318
, pp. 285
–296
.134.
Nakamura
, T.
, Chen
, S. S.
, Mureithi
, N. W.
, and Kusakabe
, T.
, 1997, “Improved Estimation of Fluidelastic Instability Threshold for Tube Arrays in Two-Phase Flow: A Model Incorporating Temporal Fluid Force Correlation Along the Tube Axis
,” Proceedings of the Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. II
, pp. 365
–372
.135.
Nakamura
, T.
, Mureithi
, N. W.
, and Chen
, S. S.
, 2001, “Correlation Based Fluidelastic Analysis of Tube Arrays in Two-Phase Flow
,” JSME Int. J., Ser. B
1340-8054, 44
(2
), pp. 213
–220
.136.
Nakamura
, T.
, Suzuta
, T.
, Tomomatsu
, K. I.
, Takai
, M.
, Iwase
, T.
, Uwagawa
, S. I.
, Madarame
, H.
, Iwatsubo
, T.
, and Saito
, T.
, 2001, “An Advanced Method to Estimate Fluidelastic Instability of Steam Generator U-Bend Tube Bundle
” Proceedings of the ASME Pressure Vessels Piping Conference on Flow-Induced Vibration-2001: Cross-Flow Heat Exchangers
, Atlanta, GA, Vol. 420I
, pp. 167
–176
.137.
Shahriary
, S.
, Mureithi
, N.
, and Pettigrew
, M. J.
, 2007, “Quasi-Static Forces and Stability Analysis in a Triangular Tube Bundle Subjected to Two-Phase Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Fluid-Structure Interaction
, San Antonio, TX, Vol. 4
, pp. 245
–252
.138.
Nakamura
, T.
, and Fujita
, K.
, 1989, “Analysis of Impact-Vibration Characteristics at the Support of Tube by Modal Method
,” Nippon Kikai Gakkai Ronbunshu, C Hen (in Japanese)/Trans JSME Part C
, 55
(516
), pp. 1878
–1883
.139.
Nakamura
, T.
, and Fujita
, K.
, 1990, “Study on the Characteristics of Fluid-Elastic Vibration of a Tube Array
,” Nippon Kikai Gakkai Ronbunshu, C Hen (in Japanese)/Trans JSME Part C
, 56
(527
), pp. 1680
–1685
.140.
Nakamura
, T.
, Fujita
, K.
, Kawanishi
, K.
, Yamaguchi
, N.
, and Tsuge
, A.
, 1992, “Study on the Vibrational Characteristics of a Tube Array Caused by Two-Phase Flow, 1: Random Vibration
,” ASME J. Pressure Vessel Technol.
0094-9930, 114
(4
), pp. 472
–478
.141.
Nakamura
, T.
, Fujita
, K.
, Kawanishi
, K.
, Yamagushi
, N.
, and Tsuge
, A.
, 1992, “Study on the Vibrational Characteristics of a Tube Array Caused by Two-Phase Flow. 2. Fluidelastic Vibration
,” ASME J. Pressure Vessel Technol.
0094-9930, 114
(4
), pp. 479
–485
.142.
Romberg
, O.
, and Popp
, K.
, 1997, “Random Excitation by Fluid Forces Acting on a Single Flexible Tube in Bundles Subjected to Cross-Flow
,” Proceedings of the ASME WAM Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 173
–181
.143.
Romberg
, O.
, and Popp
, K.
, 1998, “Influence of Upstream Turbulence on the Fluidelastic Instability of a Parallel Triangular Tube Bundle
,” J. Fluids Struct.
0889-9746, 12
, pp. 153
–169
.144.
Rottmann
, M.
, and Popp
, K.
, 2003, “Influence of Upstream Turbulence on the Fluidelastic Instability of a Parallel Triangular Tube Bundle
,” J. Fluids Struct.
0889-9746, 18
(5
), pp. 595
–612
.145.
Janzen
, V. P.
, Pettigrew
, M. J.
, Taylor
, C. E.
, and Whan
, T.
, 2001, “Vibration Behavior of Rotated Triangular Tube Bundles in Two-Phase Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration-2001: Cross-Flow Heat Exchangers
, Atlanta, GA, Vol. 420I
, pp. 141
–150
.146.
Moran
, J. E.
, and Weaver
, D. S.
, 2006, “Damping Measurements in Tube Bundles Subjected to Two-Phase Cross-Flow
,” ASME
Paper No. PVP2006/ICPVT-11.147.
Pettigrew
, M. J.
, Taylor
, C. E.
, and Kim
, B. S.
, 2001, “The Effects of Tube Bundle Geometry on Vibration in Two-Phase Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 123
, pp. 414
–420
.148.
Pettigrew
, M. J.
, Taylor
, C. E.
, Janzen
, V. P.
, and Whan
, T.
, 2002, “Vibration Behavior of Rotated Triangular Tube Bundles in Two-Phase Cross-Flows
,” ASME J. Pressure Vessel Technol.
0094-9930, 124
, pp. 144
–153
.149.
Monette
, C.
, and Pettigrew
, M. J.
, 2004, “Fluidelastic Instability of Flexible Tubes Subjected to Two-Phase Internal Flow
,” J. Fluids Struct.
0889-9746, 19
(7
), pp. 943
–956
.150.
Pettigrew
, M. J.
, Zhang
, C.
, Mureithi
, N. W.
, and Pamfil
, D.
, 2005, “Detailed Flow and Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross-Flow
,” J. Fluids Struct.
0889-9746, 20
(4
), pp. 567
–575
.151.
Feenstra
, P. A.
, Judd
, R. L.
, and Weaver
, D. S.
, 1995, “Fluidelastic Instability of a Tube Array Subjected to Two-Phase R-11 Cross-Flow
,” J. Fluids Struct.
0889-9746, 9
, pp. 747
–771
.152.
Feenstra
, P. A.
, Weaver
, D. S.
, and Judd
, R. L.
, 2002, “Modeling Two-Phase Flow-Excited Damping and Fluidelastic Instability in Tube Arrays
,” J. Fluids Structures
, 16
, pp. 811
–840
.153.
Feenstra
, P.
, Weaver
, D. S.
, and Nakamura
, T.
, 2002, “Two-Phase Cross-Flow Excitation of a Normal Square Tube Array: Experiments and Analysis
,” Proceedings of the ASME WAM Fifth International Symposium on Fluid-Structure Interaction, Aeroelasicity, Flow-Induced Vibration and Noise
, Applied Mechanics Division, New Orleans, LA, AMD Vol. 253
(1
), pp. 659
–670
.154.
Joly
, T.
, Mureithi
, N.
, and Pettigrew
, M.
, 2009, “Effect of Angle of Attack on the Fluidelastic Instability of a Tube Bundle Subjected to Cross-Flow
,” ASME
Paper No. PVP2009-77052.155.
Nakamura
, T.
, Shimamura
, K.
, Iwase
, T.
, and Nishida
, S.
, 2003, “Fluidelastic Instability of a U-bend Tube Array Based on Correlated Unsteady Fluid Force in Two-Phase Flow
,” Proceedings of the ASME Pressure Vessels and Piping Division Conference on Flow Induced Vibration
, Cleveland, OH, Vol. 465
, pp. 9
–16
.156.
Jo
, J. C.
, Kim
, W. S.
, and Jhung
, M. J.
, 2003, “Flow-Induced Vibration Characteristics of Steam Generator U-Tubes With Defect
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Problems Involving Thermal-Hydraulics, Liquid-Sloshing, and Extreme Loads on Structures
, Cleveland, OH, Vol. 454
, pp. 13
–19
.157.
Hwang
, S. S.
, Jung
, M. K.
, Kim
, H. P.
, and Kim
, J. S.
, 2006, “Ligament Rupture Pressure of Fretted SG Tubes of PWRS
,” Proceedings of the 14th International on Nuclear Engineering (ICONE 14)
, Miami, FL, Vol. 2006
.158.
Pettigrew
, M. J.
, Taylor
, C. E.
, and Kim
, B. S.
, 1989, “Vibration of Tube Bundles in Two-Phase Cross-Flow. Part 1: Hydrodynamic Mass and Damping
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 466
–477
.159.
Pettigrew
, M. J.
, Tromp
, J. H.
, Taylor
, C. E.
, and Kim
, B. S.
, 1989, “Vibration of Tube Bundles in Two-Phase Cross-Flow. Part 2: Fluid-Elastic Instability
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 478
–487
.160.
Taylor
, C. E.
, Currie
, I. G.
, Pettigrew
, M. J.
, and Kim
, B. S.
, 1989, “Vibration of Tube Bundles in Two-Phase Cross-Flow, III: Turbulence-Induced Excitation
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 488
–500
.161.
Gravelle
, A.
, Ross
, A.
, Pettigrew
, M. J.
, and Lureithi
, N. W.
, 2007, “Damping of Tubes Due to Internal Two-Phase Flow
,” J. Fluids Struct.
0889-9746, 23
(3
), pp. 447
–462
.162.
Gay
, N.
, December
, P.
, and Launay
, J.
, 1988, “Comparison of Air-Water to Water-Freon Two-Phase Cross-Flow Effects on the Vibratory Behavior of a Tube Bundle
,” Proceedings of the International Symposium on Flow-Induced Vibration and Noise: Flow-Induced Vibration and Noise in Cylinder Arrays
, Chicago, IL, pp. 139
–158
.163.
Delenne
, B.
, Gay
, N.
, Campistron
, R.
, and Banner
, D.
, 1997, “Experimental Determination of Motion-Dependent Fluid Forces in Two-Phase Water-Freon Cross-Flow
,” Proceedings of the ASME WAM, Aerospace Division, Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise Conference
, Dallas, TX, Vol. 53-2
, pp. 349
–356
.164.
Pettigrew
, M. J.
, Taylor
, C. E.
, Jong
, J. H.
, and Currie
, I. G.
, 1995, “Vibration of a Tube Bundle in Two-Phase Freon Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 117
(4
), pp. 321
–329
.165.
Mann
, W.
, and Mayinger
, F.
, 1995, “Flow-Induced Vibration of Tube Bundles Subjected to Single- and Two-Phase Cross-Flow
,” Advances in Multiphase Flow
, Elsevier
, Amsterdam
, pp. 603
–612
.166.
Gidi
, A.
, Weaver
, D. S.
, and Judd
, R. L.
, 1997, “Two-Phase Flow Induced Vibrations of Tube Bundles With Tube Surface Boiling
,” Proceedings of the ASME WAM, Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 381
–389
.167.
Suzaya
, T.
, Hirato
, Y.
, Tomomatsu
, K. I.
, Takai
, M.
, Iwase
, T.
, Uwagawa
, S. I.
, Madarame
, H.
, Iwatubo
, T.
, and Saito
, T.
, 2002, “Advanced Estimation of Fluidelastic Instability of U-Bend Tube Bundles of Steam Generator (1st Report, Tube Array Test And Thermal-Hydraulic Analysis
),” Nippon Kikai Gakkai Ronbunshu, B Hen (in Japanese)/Trans. Japan Soc. Mech. Eng. Part B
, 68
(668
), pp. 1235
–1243
.168.
Hirota
, K.
, Nakamura
, T.
, Mureithi
, N. W.
, Kasahara
, J.
, Kusakabe
, T.
, and Takamatsu
, H.
, 1996, “Dynamics of an In-Line Tube Array in Steam-Water Flow. Part III: Fluidelastic Instability Tests and Comparison With Theory
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Montreal, Canada, Vol. 328
, pp. 123
–134
.169.
Nakamura
, T.
, Hirota
, K.
, Watanabe
, Y.
, Mureithi
, N. W.
, Kusakabe
, T.
, and Takamatsu
, H.
, 2002, “Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part I: Two-Phase Damping and Added Mass
,” J. Fluids Struct.
0889-9746, 16
, pp. 123
–136
.170.
Nakamura
, T.
, Suzuta
, T.
, Tomomatsu
, K. I.
, Takai
, M.
, Iwase
, T.
, Uwagawa
, S. I.
, Madarame
, H.
, Iwatsubo
, T.
, and Saito
, T.
, 2002, “Advanced Estimation on Fluidelastic Instability of U-Bend Tube Bundle of Steam Generator (3rd Report, Advanced Estimated Method)
,” Nippon Kikai Gakkai Ronbunshu, C Hen (in Japanese)/Trans. Japan Soc. Mech. Eng. Part C
, 68
(4
), pp. 1073
–1079
.171.
Mureithi
, N. W.
, Nakamura
, T.
, Hirota
, K.
, Murata
, M.
, Utsumi
, S.
, Kusakabe
, T.
, and Takamatsu
, H.
, 2002, “Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part II: Unsteady Fluid Forces
,” J. Fluids Struct.
0889-9746, 16
, pp. 137
–152
.172.
Hirota
, K.
, Nakamura
, T.
, Kasahara
, J.
, Mureithi
, N. W.
, Kusakabe
, T.
, and Takamatsu
, H.
, 2002, “Dynamics of an In-Line Tube Array Subjected to Steam-Water Cross-Flow, Part III: Fluidelastic Instability Tests and Comparison With Theory
,” J. Fluids Struct.
0889-9746, 16
, pp. 153
–173
.173.
Blevins
, R. D.
, 1984, “Rational Algorithm for Predicting Vibration-Induced Damage to Tube and Shell Heat Exchangers
,” Proceedings of the ASME WAM Symposium Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 87
–101
.174.
Axisa
, F.
, Dessaux
, A.
, and Gilbert
, R. J.
, 1984, “Experimental Study of Tube/Support Impact Forces in Multi-Span PWR Steam Generator Tubes
,” Proceedings of the ASME WAM, Symposium on Flow-Induced Vibration
, New Orleans, LA, Vol. 3
, pp. 139
–148
.175.
Rogers
, R. J.
, and Pick
, R. J.
, 1976, “On the Dynamic Spatial Response of a Heat Exchanger Tube With Intermittent Baffle Contacts
,” Nucl. Eng. Des.
0029-5493, 36
(1
), pp. 81
–90
.176.
Rogers
, R. J.
, and Pick
, R. J.
, 1977, “Factors Associated With Support Plate Forces Due to Heat Exchanger Tube Vibratory Contact
,” Nucl. Eng. Des.
0029-5493, 44
, pp. 247
–253
.177.
Nguyen
, D. T.
, Noah
, S. T.
, and Kettleborough
, C. F.
, 1986a, “Impact Behavior of an Oscillator With Limiting Stops, Part I: A Parametric Study
,” J. Sound Vib.
0022-460X, 109
(2
), pp. 293
–307
.178.
Nguyen
, D. T.
, Noah
, S. T.
, and Kettleborough
, C. F.
, 1986b, “Impact Behavior of an Oscillator With Limiting Stops. II. Dimensionless Design Parameters
,” J. Sound Vib.
0022-460X, 109
(2
), pp. 309
–325
.179.
Axisa
, F.
, Antunes
, J.
, and Villard
, B.
, 1988, “Overview of Numerical Methods for Predicting Flow-Induced Vibration
,” ASME J. Pressure Vessel Technol.
0094-9930, 110
, pp. 6
–14
.180.
Axisa
, F.
, and Izquierdo
, P.
, 1992, “Experiments on Vibro-Impact Dynamics of Loosely Supported Tubes Under Harmonic Excitation
,” Proceedings of the ASME Symposium on Flow-Induced Vibration and Noise
, Vol. 242
(2
), pp. 281
–300
.181.
Antunes
, J.
, Villard
, B.
, and Axisa
, F.
, 1985, “Cross-Flow Induced Vibration of U-bend of Steam-Generator Tubes
,” Proceedings of the Eighth International Conference on Structural Mechanics in Reactor Technology
, Brussels, Belgium, Vols. F1
and F2, pp. 229
–234
.182.
Axisa
, F.
, and Antunes
, J.
, 1989, “Vibration Response of Loosely Supported Tubes to Fluidelastic Instability
,” Proceedings of the International Conference on Engineering Aero-Hydroelasticity
, Prague.183.
Jacquart
, G.
, and Gay
, N.
, 1993, “Computation of Impact-Friction Interaction Between a Vibrating Tube and Its Loose Supports
,” EDF-Electricite de France, Clamart, France.184.
Laggiard
, E.
, Runkel
, J.
, and Stegemann
, D.
, 1993, “One-Dimensional Bimodal Model of Vibration and Impacting of Instrument Tubes in a Boiling Water Reactor
,” Nucl. Sci. Eng.
0029-5639, 115
(1
), pp. 62
–70
.185.
Wu
, Y. H.
, and Wang
, X. C.
, 1993, “Probabilistic Analysis of Fluidelastic Instability Controlled by Inactive Supports
,” Qinghua Daxue Xuebao/J. Tsinghua University
, 33
(5
), pp. 94
–97
.186.
Antunes
, J.
, 1986, “Contribution a’ I’Etude des Vibrations de Faiseaux de Tubes en Ecoulement Transversal
,” Ph.D. thesis, l’Universite´ de Paris VI, France.187.
Antunes
, J.
, Axisa
, F.
, Beaufils
, B.
, and Guilbaud
, D.
, 1988, “Coulomb Friction Modeling in Numerical Simulations of Vibration and Wear Work Rate of Multispan Tube Bundles
,” Proceedings of the ASME International Symposium on Flow-Induced Vibration and Noise: Flow-Induced Vibration in Heat-Transfer Equipment
, Chicago, IL, pp. 157
–176
.188.
Antunes
, J.
, Axisa
, F.
, Beaufils
, B.
, and Guilbaud
, D.
, 1990, “Coulomb Friction Modeling in Numerical Simulations of Vibration and Wear Work Rate of Multi-Span Heat Exchangers
,” J. Fluids Struct.
0889-9746, 4
, pp. 287
–304
.189.
Antunes
, J.
, Axisa
, F.
, and Vento
, M. A.
, 1992, “Experiments on Tube/Support Interaction With Feedback-Controlled Instability
,” ASME J. Pressure Vessel Technol.
0094-9930, 114
(1
), pp. 23
–32
.190.
Antunes
, J.
, De Langre
, E.
, Vento
, M. A.
, and Axisa
, F.
, 1992, “Theoretical Model for the Vibro-Impact Motions of Tube Bundles Under Fluidelastic Instability
,” Proceedings of the ASME Pressure Vessels and Piping
, Anaheim, CA, Vol. 242
, pp. 135
–150
.191.
Sauvé
, R. G.
, and Teper
, W. W.
, 1987, “Impact Simulation Process Equipment Tubes and Support Plates—A Numerical Algorithm
,” ASME J. Pressure Vessel Technol.
0094-9930, 109
(1
), pp. 70
–79
.192.
Lin
, S. Q.
, and Bapat
, C. N.
, 1992, “Estimation of Clearances and Impact Forces Using Vibro-Impact Response: Sinusoidal Excitation
,” J. Sound Vib.
0022-460X, 157
, pp. 485
–513
.193.
Lin
, S. Q.
, and Bapat
, C. N.
, 1993, “Estimation of Clearances and Impact Forces Using Vibro-Impact Response: Random Excitation
,” J. Sound Vib.
0022-460X, 163
, pp. 407
–421
.194.
Lin
, S. Q.
, and Bapat
, C. N.
, 1993, “Extension of Clearance and Impact Force Estimation Approaches to a Beam-Stop System
,” J. Sound Vib.
0022-460X, 163
(3
), pp. 423
–428
.195.
Peterka
, F.
, 1994, “Impact Vibration of a Tube in the Channel With Axial Flow
,” Proceedings of the Second International Conference of EAHE
, Pilsen, Czech Republic, pp. 334
–339
.196.
Peterka
, F.
, 1995, “Impact Interaction of Two Heat Exchanger Tubes
,” Proceedings of the Sixth International Flow-Induced Vibration Conference
, London, Belkema
, Rotterdam
, pp. 393
–400
.197.
Païdoussis
, M. P.
, and Botez
, R. M.
, 1995, “Three Routes to Chaos for a Three-Degree-of-Freedom Articulated Cylinder System Subjected to Annular Flow and Impacting on the Outer Pipe
,” Nonlinear Dyn.
0924-090X, 7
, pp. 429
–450
.198.
Hilding
, D.
, Massih
, A. R.
, and Plobeck
, L.
, 1996, “Calculation of Cross-Flow-Induced Fluidelastic Vibration of Fuel Rods in Pressurized Water Reactors
,” Proceedings of the ASME Pressure Vessels Piping Conference on Flow-Induced Vibration
, Montreal, Canada, Pt. 1, Vol. 328
, pp. 25
–37
.199.
Antunes
, J.
, Axisa
, F.
, and Vento
, M. A.
, 1990, “Experiments on Vibro-Impact Dynamics Under Fluidelastic Instability
,” Proceedings of the ASME Pressure Vessels Piping
, New York, Vol. 189
, pp. 127
–138
.200.
Vento
, M. A.
, Antunes
, J.
, and Axisa
, F.
, 1992, “Tube/Support Interaction Under Simulated Fluidelastic Instability: Two-Dimensional Experiments and Computations of the Nonlinear Responses of a Straight Tube
,” Proceedings of the ASME Conference Pressure Vessels and Piping
, Anaheim, CA, Vol. 242
, pp. 151
–166
.201.
Stuhmiller
, J. H.
, Kan
, K. K.
, and Steininger
, D.
, 1984, “Flexi: A Computer Program for Studying Contact-Implied Forces on Tube Vibrations
,” Proceedings of the ASME Pressure Vessels and Piping Conference, Impact, Fragmentation and Blast (Vessels, Pipes, Tubes, Equipment)
, San Antonio, TX, Vol. 82
, pp. 279
–291
.202.
Yu
, X. H.
, 1986, “Analysis of Tube Failure in a U-Shape Tube Bundle
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Chicago, IL, Vol. 104
, pp. 187
–192
.203.
Rao
, M. S. M.
, Gupta
, G.
, Eisinger
, F. L.
, Hibbitt
, H.
, and Steininger
, D.
, 1987, “Computer Modeling of Vibration and Wear of Multi-Span Tubes With Clearances at Supports
,” Proceedings of the International Conference on Flow-Induced Vibrations
, Bowness-on Windermere, UK.204.
Cai
, Y.
, and Chen
, S. S.
, 1993, “Chaotic Vibrations of Nonlinearly Supported Tubes in Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 115
(2
), pp. 128
–134
.205.
Han
, Y.
, and Fisher
, N. J.
, 2002, “Validation of Flow-Induced Vibration Prediction Codes—PIPO-FE and VIBIC Versus Experimental Measurements
,” Proceedings of the ASME WAM Applied Mechanics Division Fifth International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise
, New Orleans, LA, Pt. B, Vol. 2
, pp. 771
–782
.206.
Fricker
, A. J.
, 1991, “Vibro-Impact Behavior of Fluid-Elastically Unstable Heat Exchanger Tubes With Support Clearances
,” Proceedings of the International Conference on Flow-Induced Vibrations
, Brighton, UK, Institute of Mechanical Engineers
, London
, pp. 129
–137
.207.
Fricker
, A. J.
, 1992, “Numerical Analysis of the Fluid-Elastic Vibration of a Steam Generator Tube With Loose Supports
,” J. Fluids Struct.
0889-9746, 6
, pp. 85
–107
.208.
Païdoussis
, M. P.
, Price
, S. J.
, and Mureithi
, N. W.
, 1992, “Post-Fluidelastic-Instability Response of a Loosely Supported Tube in an Array Subjected to Water Cross-Flow
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division (Publication) on Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol. 242
, pp. 243
–263
.209.
De Langre
, E.
, Belanger
, F.
, and Porcher
, G.
, 1992, “Linearized Potential Flow Theory Applied to the Calculation of Fluidelastic Forces in Annular Flow Configurations
,” Proceedings of the ASME WAM Pressure Vessels and Piping Conference: Axial and Annular Flow-Induced Vibration and Instabilities
, Anaheim, CA, Vol. 244
, pp. 187
–204
.210.
Mureithi
, N. M.
, Itô
, T.
, and Nakamura
, T.
, 1996, “Identification of Fluidelastic Instability Under Conditions of Turbulence and Nonlinear Tube Supports
,” Proceedings of the ASME Pressure Vessel and Piping Conference
, Montreal, Canada, Vol. 318
, pp. 19
–24
.211.
Fluit
, S. M.
, and Pettigrew
, M. J.
, 2001, “Simplified Method for Predicting Vibration and Fretting-Wear in Nuclear Steam Generators
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration-2001: Cross-Flow Heat Exchangers
, Atlanta, GA, Vol. 420I
, pp. 7
–16
.212.
Chen
, S. S.
, Zhu
, S.
, and Cai
, Y.
, 1994, “Experiment on Fluidelastic Instability of Loosely Supported Tube Arrays in Cross-Flow
,” Argonne National Laboratory Report No. ANL/ET/CP-81075.213.
Chen
, S. S.
, Zhu
, S.
, and Cai
, Y.
, 1995, “Experiment of Chaotic Vibration of Loosely Supported Tube Rows in Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 117
(3
), pp. 204
–212
.214.
Zhou
, T.
, and Rogers
, R. J.
, 1997, “Simulation of Two-Dimensional Squeeze Film and Solid Contact Forces Acting on a Heat Exchanger Tube
,” J. Sound Vib.
0022-460X, 203
(4
), pp. 621
–639
.215.
Godon
, J. L.
, and Lebret
, J.
, 1988, “Influence of the Tube-Support Plate Clearance on Flow-Induced Vibration in Large Condensers
,” Proceedings of the International Symposium on Flow-Induced Vibration and Noise: Flow-Induced Vibration in Heat-Transfer Equipment
, Chicago, IL, pp. 177
–186
.216.
Iwase
, T.
, Sunami
, T.
, Matsutani
, K.
, Nakamura
, T.
, Mureithi
, N. W.
, Tsuge
, A.
, Watanabe
, Y.
, Tomomatsu
, K. I.
, and Takaba
, O.
, 1997, “Flow-Induced Vibration of a Tube Array in the Inlet Region of a High Performance Steam Generator (Part 1: Turbulence Induced Vibration)
,” Proceedings of the ASME WAM Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 301
–308
.217.
Iwase
, T.
, Sunami
, T.
, Matsutani
, K.
, Nakamura
, T.
, Mureithi
, N. W.
, Tsuge
, A.
, Kasahara
, J.
, Tomomatsu
, K. I.
, and Takaba
, O.
, 1997, “Flow-Induced Vibration of a Tube Array in the Inlet Region of a High Performance Steam Generator (Part 2: Unstable Vibration and Chaos)
,” Proceedings of the ASME WAM, Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise, Aerospace Division (Publication) AD
, Dallas, TX, Vol. 53-1
, pp. 265
–272
.218.
Xi
, T.
, and Rogers
, R.
, 1996, “Dynamic Friction Modeling in Heat Exchanger Tube Simulations
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Montreal, Canada, Vol. 328
, pp. 347
–358
.219.
Tan
, X.
, and Rogers
, R. J.
, 1996, “Dynamic Friction Modeling in Heat Exchanger Tube Simulations
,” Proceedings of the ASME Pressure Vessel and Piping Conference
, Montreal, Canada, Vol. PVP-328
, pp. 347
–358
.220.
Hassan
, M. A.
, and Rogers
, R. J.
, 2005, “Friction Modeling of Preloaded Tube Contact Dynamics
,” Nucl. Eng. Des.
0029-5493, 235
, pp. 2349
–2357
.221.
Fisher
, N. J.
, Oleson
, M.
, Rogers
, R.
, and Ko
, P.
, 1989, “Simulation of Tube-to-Support Dynamic Interaction in Heat Exchanger Equipment
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 378
–384
.222.
Fisher
, N. J.
, Tromp
, J.
, and Smith
, B.
, 1996, “Measurement of Dynamic Interaction Between a Vibrating Fuel Element and Its Support
,” Proceedings of the ASME Pressure Vessel Piping Conference
, Montreal, Canada, 318
, pp. 271
–283.223.
Fisher
, N. J.
, and Ingham
, B.
, 1989, “Measurement of Tube-to-Support Dynamic Forces in Fretting-Wear Rigs
,” ASME J. Pressure Vessel Technol.
0094-9930, 111
(4
), pp. 385
–393
.224.
Fisher
, N. J.
, Ing
, J. G.
, Pettigrew
, M. J.
, and Rogers
, R. J.
, 1992, “Tube-to-Support Dynamic Interaction for a Multispan Steam Generator Tube
,” Proceedings of the ASME Pressure Vessels and Piping Conference Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol. 242
, pp. 301
–316
.225.
Fisher
, N. J.
, Chow
, A. B.
, and Weckwerth
, M. K.
, 1995, “Experimental Fretting-Wear Studies of Steam Generator Materials
,” ASME J. Pressure Vessel Technol.
0094-9930, 117
(4
), pp. 312
–320
.226.
Kwon
, D. I.
, Hong
, J. K.
, Kim
, I. S.
, Park
, C. Y.
, and Boo
, M. H.
, 2003, “Impact Fretting Wear of Steam Generator Tubes
,” Korean Nuclear Society 2003 Spring
, p. 279
.227.
Knudsen
, J.
, Massih
, A. R.
, and Johansson
, L.
, 1997, “Calculation of Vibro-Impact Dynamics of Loosely Supported Rods
,” ASME Proceedings of Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise Symposium
, Vol. 53-1
, pp. 229
–237
.228.
Knudsen
, J.
, and Massih
, A. R.
, 1999, “Analysis of Loosely Supported Beam Under Harmonic Excitation
,” ASME Proceedings of Pressure Vessels and Piping Conference
, Boston, MA, Vol. 389
, pp. 265
–272
.229.
Knudsen
, J.
, and Massih
, A. R.
, 2000, “Vibro-Impact Dynamics of a Periodically Forced Beam
,” ASME J. Pressure Vessel Technol.
0094-9930, 122
, pp. 210
–221
.230.
Knudsen
, J.
, and Massih
, A. R.
, 2003, “Dynamic Stability of Weakly Damped Oscillators With Elastic Impacts and Wear
,” J. Sound Vib.
0022-460X, 263
(1
), pp. 175
–204
.231.
Knudsen
, J.
, and Massih
, A. R.
, 2004, “Impact Oscillations and Wear of Loosely Supported Rod Subject to Harmonic Load
,” J. Sound Vib.
0022-460X, 278
(4–5
), pp. 1025
–1050
.232.
Gale
, J.
, and Tiseli
, I.
, 2006, “Eight Equation Model for Arbitrary Shaped Pipe Conveying Fluid
,” Proceedings of the International Conference on Nuclear Energy for New Europe
, Portoroz, Slovenia, pp. 616.1
–616.10
.233.
Frick
, T.
, Sobek
, T.
, and Reavis
, R.
, 1984, “Overview on the Development and Implementation of Methodologies to Compute Vibration and Wear of Steam Generator Tubes
,” Proceedings of the ASME WAM Symposium on Flow-Induced Vibration
, New Orleans, LA, pp. 149
–161
.234.
Axisa
, F.
, Villard
, B.
, Gibert
, R. J.
, Hetsroni
, G.
, and Sundheimer
, P.
, 1984, “Vibration of Tube Bundles Subjected to Air-Water and Steam-Water Cross-Flow: Preliminary Results on Fluidelastic Instability
,” Proceedings of the ASME WAM Symposium on Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 269
–284
.235.
De Langre
, E.
, Beaufils
, B.
, and Antunes
, J.
, 1991, “The Numerical Prediction of Vibrations in Tube Bundles Induced Cross-Flow Turbulence
,” Proceedings of the International Conference on Flow-Induced Vibrations
, Brighton, UK, Institute of Mechanical Engineers
, London
, pp. 253
–262
.236.
De Langre
, E.
, Hadj-Sadok
, C.
, and Beaufils
, B.
, 1992a, “Nonlinear Vibrations Induced by Fluidelastic Forces in Tube Bundles
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division (Publication)
, PVP Vol. 242
, pp. 107
–134
.237.
Payen
, Th.
, and De Langre
, E.
, 1996, “Probabilistic Approach for the Computation of Non-Linear Vibrations of Tubes Under Cross-Flow
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Montreal, Canada, Vol. 328
, pp. 337
–341
.238.
Yetisir
, M.
, and Fisher
, N. J.
, 1996, “Fretting-Wear Prediction in Heat Exchanger Tubes: The Effect of Chemical Cleaning and Modeling Ill-Defined Support Conditions
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Montreal, Canada, Vol. PVP-328
, pp. 359
–368
.239.
Chen
, S. S.
, Jendrzejczyk
, J. K.
, and Wambsganss
, M. W.
, 1984, “Dynamics of Tubes in Fluid With Tube-Baffle Interaction
,” ASME WAM Symposium on Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 285
–304
, Department of Energy Report No. CONF-841201-2.240.
Cha
, J. H.
, Wambsganss
, M. W.
, and Jendrzejczyk
, J. A.
, 1987, “Experimental Study on Impact/Fretting Wear in Heat Exchanger Tubes
,” ASME J. Pressure Vessel Technol.
0094-9930, 109
(3
), pp. 265
–74
.241.
De Langre
, E.
, and Lebreton
, G.
, 1996, “Experimental and Numerical Analysis of Chaotic Motion in Vibration With Impact
,” Proceedings of the ASME Pressure Vessel and Piping Conference
, Montreal, Canada, Vol. 328
, pp. 317
–325
.242.
Haslinger
, K. H.
, Martin
, M. L.
, and Voelker
, R. F.
, 1987, “Dynamic Response Testing of a Single Tube and Tube Array With Various Tube Support Geometries
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibrations
, San Diego, CA, Vol. 122
, pp. 117
–126
.243.
Antunes
, J.
, Paulino
, M.
, and Piteau
, P.
, 1998, “Remote Identification of Impact Forces on Loosely Supported Tubes: Part 2-Complex Vibro-Impact Motions
,” J. Sound Vib.
0022-460X, 215
(5
), pp. 1043
–1064
.244.
Whiston
, G. S.
, 1984, “Remote Impact Analysis by Use of Propagated Acceleration Signals, I: Theoretical Methods
,” J. Sound Vib.
0022-460X, 97
(1
), pp. 35
–51
.245.
Jordan
, R. W.
, and Whiston
, G. S.
, 1984, “Remote Impact Analysis by use of Propagated Acceleration Signals, II: Comparison Between Theory and Experiments
,” J. Sound Vib.
0022-460X, 97
, pp. 53
–63
.246.
De Araújo
, M.
, Antunes
, J.
, and Piteau
, P.
, 1998, “Remote Identification of Impact Forces on Loosely Supported Tubes. I. Basic Theory and Experiments
,” J. Sound Vib.
0022-460X, 215
(5
), pp. 1015
–1041
.247.
Paulino
, M.
, Antunes
, J.
, and Izquierddo
, P.
, 1999, “Remote Identification of Impact Forces on Loosely Supported Tubes: Analysis of Multi-Supported Systems
,” ASME J. Pressure Vessel Technol.
0094-9930, 121
(1
), pp. 61
–70
.248.
Antunes
, J.
, Paulino
, M.
, and Izquierdo
, P.
, 2001, “Blind Identification of Impact Forces From Multiple Remote Vibratory Measurements
,” Int. J. Nonlinear Sci. Numer. Simul.
1565-1339, 2
(1
), pp. 1
–20
.249.
Lim
, J. H.
, Jung
, G. C.
, and Choi
, Y. S.
, 2003, “Nonlinear dynamic Analysis of a Cantilever Tube Conveying Fluid With System Identification
,” KSME J. Mech. Sci. Tech.
1226-4865, 17
(12
), pp. 1994
–2003
.250.
Barsamian
, H. R.
and Hassan
, Y. A.
, 1994, “Flow Visualization of Inlined/Staggered Tube Bundles in Cross-Flow Using Large-Eddy Simulation
,” Trans. Am. Nucl. Soc.
0003-018X, 71
, pp. 541
–543
.251.
Hassan
, M. M.
, 2006, “Simulation of Fluidelastic Vibrations of Heat Exchanger Tubes With Loose Supports
,” ASME
Paper No. PVP2006/ICPVT-11.252.
Wang
, D. B.
, Wei
, X. L.
, Xiang
, S.
, Wu
, J. X.
, and Guo
, C. X.
, 2006, “Random Response Analysis of Flow-Induced Vibration in Heat Exchangers
,” J. Vibration and Shock
, 25
(3
), pp. 142
–146
(in Chinese).253.
Hassan
, M.
, and Hossen
, A.
, 2009, “Time Domain Models for Damping-Controlled Fluidelastic Instability Forces in Tubes With Loose Supports
,” ASME
Paper No. PVP2009-77163.254.
Taylor
, C. E.
, 1992, “Random Excitation Forces in Tube Arrays Subjected to Two-Phase Cross-Flow
,” Proceedings of the ASME WAM, FSI/FIV in Cylinder Arrays in Cross-Flow, Heat Transfer Division
, Anaheim, CA, HTD Vol. 230
, pp. 89
–107
.255.
Taylor
, C. E.
, Pettigrew
, M. J.
, and Currie
, I. G.
, 1996, “Random Excitation Forces in Tube Bundles Subjected to Two-Phase Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 118
, pp. 265
–277
.256.
Taylor
, C. E.
, and Pettigrew
, M. J.
, 2000, “Random Excitation Forces in Heat Exchanger Tube Bundles
,” ASME J. Pressure Vessel Technol.
0094-9930, 122
(4
), pp. 509
–514
.257.
Pettigrew
, M. J.
, and Taylor
, C. E.
, 2002, “Vibration Analysis of Steam Generators and Heat Exchangers: An Overview, Part 1: Flow, Damping, Fluidelastic Instability
,” Proceedings of the ASME WAM Fifth International Symposium on Fluid-Structure Interaction, Aeroelasicity, Flow-Induced Vibration and Noise
, Pt. A, Vol. 253
(1
), pp. 571
–581
.258.
Pettigrew
, M. J.
, and Taylor
, C. E.
, 2002, “Vibration Analysis of Steam Generators and Heat Exchangers: An Overview—Part 2: Vibration Response, Fretting-Wear, Guidelines
,” Proceedings of the ASME WAM Fifth International Symposium on Fluid-Structure Interaction, Aeroelasicity, Flow-Induced Vibration and Noise
, Pt. A, Vol. 253
(1
), pp. 583
–594
.259.
Pettigrew
, M.
, and Taylor
, C. E.
, 2003, “Vibration Analysis of Shell-and-Tube Heat Exchangers: An Overview—Part 2: Vibration Response, Fretting-Wear, Guidelines
,” J. Fluids Struct.
0889-9746, 18
(5
), pp. 485
–500
.260.
Weaver
, D. S.
, and Schneider
, W.
, 1983, “The Effect of Flat Bar Supports on the Cross-Flow Induced Response of Heat Exchanger U-Tubes
,” ASME J. Eng. Power
0022-0825, 105
, pp. 775
–781
.261.
Haslinger
, K. H.
, and Martin
, M. L.
, 1988, “Experimental Investigation Into the Nonlinear Dynamic Behavior of a U-Tube Bundle With Dynamically Active Support Strips
,” Proceedings of the International Symposium on Flow-Induced Vibration and Noise: Flow-Induced Vibration in Heat-Transfer Equipment
, Chicago, IL, pp. 219
–234
.262.
Haslinger
, K. H.
, and Steininger
, D. A.
, 1992, “Experimental Characterization of the Response of a U-Tube Bundle With Anti-Vibration Bar Supports Due to Turbulence and Fluidelastic Excitations
,” Proceedings of the ASME WAM Heat Transfer Division (Publication) HTD FSI/FIV in Cylinder Arrays in Cross-Flow
, Anaheim, CA, Vol. 230
, pp. 161
–184
.263.
Gay
, N.
, and Granger
, S.
, 1992, “Flow-Induced Decentering and Tube Support Interaction for Steam Generator Tubes, Part I. Experiment
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol. PVP-242
, pp. 189
–205
.264.
Granger
, S.
, and Gay
, N.
, 1992, “Flow-Induced Decentering and Tube-Support Interaction for Steam Generator Tubes: Part 2—Physical Interpretation
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division Cross-Flow Induced Vibration of Cylinder Arrays
, Anaheim, CA, Vol-PVP 242
, pp. 207
–222
.265.
Rao
, M. S. M.
, Steininger
, D. A.
, Ahluwalia
, K. S.
, and Eisinger
, F. L.
, 1992, “Simulation of PWR Steam Generator Tubes Undergoing Turbulence and Fluidelastic Excitation for Wear Prediction
,” Proceedings of the ASME WAM Heat Transfer Division, (Publication) HTD FSI/FIV on Cylinder Arrays in Cross-Flow
, Anaheim, CA, Vol. 230
, pp. 185
–210
.266.
Gorman
, J. A.
, and Lowenstein
, D. B.
, 1993, “Acceptance Limits for Steam Generator Tube Loss of Wall Thickness
,” Atomic Energy Control Board Report No. INFO-0441.267.
Mohany
, A.
, and Janzen
, V.
, 2009, “Flow-Induced Vibration and Fretting-Wear Performance of Candu Steam Generator U-Tubes: Instrumentation
,” ASME
Paper No. PVP2009-78076.268.
Jo
, J. C.
, and Shin
, W. K.
, 1999, “Fluidelastic Instability Analysis of Operating Nuclear Steam Generator U-Tubes
,” Nucl. Eng. Des.
0029-5493, 193
(1–2
), pp. 55
–71
.269.
Jo
, J. C.
, Shin
, W. K.
, Lee
, S. K.
, Kim
, W. S.
, Kim
, H. J.
, and Cho
, S. J.
, 1994, “Assessment of the Potential for Fluidelastic Instability of Steam Generator U-Tubes in Operating Nuclear Power Plants
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Transient Thermal Hydraulics, Heat Transfer, Fluid-Structure Interaction, and Structural Dynamics
, Minneapolis, MN, Vol. 270
, pp. 93
–98
.270.
Jo
, J. C.
, Jhung
, M. J.
, Kim
, W. S.
, and Kim
, H. J.
, 2005, “Dynamic Characteristics of Steam Generator U-Tubes With Defect
,” Nucl. Eng. Des.
0029-5493, 235
, pp. 821
–831
.271.
Nakamura
, T.
, Hirota
, K.
, Tomomatsu
, K. I.
, Takai
, M.
, Iwase
, T.
, Uwagawa
, S. I.
, Madarame
, H.
, Iwatsubo
, T.
, and Saito
, T.
, 2002, “Advanced Estimation on Fluidelastic Instability of U-Bend Tube Bundle of Steam Generator (2nd Report, Fluidelastic Vibration by HFCF-123 Fluid Two-Phase Flow)
,” Nippon Kikai Gakkai Ronbunshu, C Hen (in Japanese)/Trans. Japan Soc. Mech. Eng. Part C
, 68
(4
), pp. 1064
–1072
.272.
Janzen
, V. P.
, Hagberg
, E. G.
, Pettigrew
, M. J.
, and Taylor
, C. E.
, 2005, “Fluidelastic Instability and Work-Rate Measurements of Steam-Generator U-Tubes in Air-Water Cross-Flow
,” ASME J. Pressure Vessel Technol.
0094-9930, 127
(1
), pp. 84
–91
.273.
Schramm
, K.
, and Bergholz
, S.
, 2000, “Dynamic Nonlinear Analysis for the Fretting Wear Prediction in Steam Generator Heating Tubes
,” ASME Pressure Vessels and Piping Division Publication
, 414
, pp. 179
–185
.274.
Kim
, K. T.
, Jang
, Y. K.
, and Choi
, J. H.
, 2004, “A Study of Flow-Induced Grid-to-Rod Fretting Wear in PWR Fuel Assemblies
,” Proceedings of the ASME Pressure Vessels and Piping Division Conference Problems Involving Thermal-Hydraulics, Liquid Sloshing and Extreme Loads on Structures
, San Diego, CA, Vol. 489
, pp. 81
–85
.275.
Nowlan
, I.
, Ross
, A.
, and Pettigrew
, M.
, 2009, “Dynamic Interaction Between a Straight Tube and an Anti-Vibration Bar
,” ASME
Paper No. PVP2009-77804.276.
Helms
, H. A.
, 1970, Flow-Induced Vibrations. A Problem in the Design of Heat Exchangers for Nuclear Service
, Proceedings of the ASME on Flow-Induced Vibrations in Heat Exchangers
, New York, pp. 8
–17
.277.
Uhlig
, H. H.
, 1954, “Mechanism of Fretting Corrosion
,” ASME J. Appl. Mech.
0021-8936, 21
, pp. 401
–407
.278.
Beavers
, G. S.
, and Plunkett
, R.
, 1974, “Modeling of Flow-Induced Vibrations in Heat Exchangers and Nuclear Reactors
,” ASME J. Fluids Eng.
0098-2202, 96
(4
), pp. 358
–364
279.
Becker
, O.
, 1984, “Parametric and Combination Resonances of Pipes Conveying Pulsatile Fluids
,” Proceedings of the ASME WAM Symposium on Flow-Induced Vibrations
, New Orleans, LA, Vol. 6
, pp. 117
–128
.280.
Alyamovskii
, M. I.
, 1974, “Characteristics of Hydrodynamic Forces Acting During Self-Oscillations of Pipes in Heat Exchange Apparatus
,” Energomashinostroenie
0131-1336, 7
, pp. 33
–36
.281.
Blevins
, R. D.
, 1979a, “Flow-Induced Vibration in Nuclear Reactors: A Review
,” Prog. Nucl. Energy
0149-1970, 4
(1
), pp. 25
–49
.282.
Engel
, P. A.
, 1978, Impact Wear of Materials
, Elsevier
, Amsterdam
.283.
Gaul
, D. J.
and Duquette
, D. J.
, 1980, “Cyclic Wear Behavior (Fretting) of a Tempered Martensite Steel
,” Metall. Mater. Trans. A
1073-5623, 11A
(9
), pp. 1581
–1588
.284.
Païdoussis
, M. P.
, and Besançon
, P.
, 1981, “Dynamics of Arrays of Cylinders With Internal and External Axial Flow
,” J. Sound Vib.
0022-460X, 76
, pp. 361
–379
.285.
Magel
, E. E.
, 1990, Experimental and Theoretical Studies of the Wear of Heat Exchanger Tubes
, MS thesis, University of British Columbia, Canada.286.
Cai
, Y.
, Chen
, S. S.
, and Mulcahy
, T. M.
, 1991, “Fluidelastic Instability of Loosely Supported Tubes
,” Department of Energy Report No. ANL/CP-73023.287.
Cai
, Y.
, Chen
, S. S.
, and Chandra
, S.
, 1992, “Theory for Fluidelastic Instability of Tube-Support-Plate-Inactive Modes
,” ASME J. Pressure Vessel Technol.
0094-9930, 114
(2
), pp. 139
–148
.288.
Gessesse
, Y.
, Attia
, M. H.
, and Osman
, M. O. M.
, 2004, “On the Mechanics of Crack Initiation and Propagation in Elasto-Plastic Materials in Impact Fretting Wear
,” ASME J. Tribol.
0742-4787, 126
(2
), pp. 395
–403
.289.
Attia
, H.
, Gessesse
, Y. B.
, and Osman
, M. O. M.
, 2007, “New Parameter for Characterizing and Correlating Impact-Sliding Fretting Wear to Energy Dissipation—Experimental Investigation
,” Wear
0043-1648, 263
(1–6
), pp. 419
–429
.290.
Hofmann
, P. J.
, and Schettler
, T.
, 1992, “PWR Steam Generator Tube Fretting and Fatigue Wear Phenomena and Correlations
,” Proceedings of the ASME WAM FSI/FIV on Cylinder Arrays in Cross-Flow
, Heat Transfer Division, (Publication) HTD, Anaheim, CA, Vol. 230
, pp. 211
–236
.291.
Hofmann
, P. J.
, Friedrich
, B. C.
, and Schroeder
, H. J.
, 1996, “Prediction of PWR Steam Generator Tube Material Loss Caused by Perpendicular Impacting
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow-Induced Vibration
, Montreal, CA, Vol. 328
, pp. 219
–231
.292.
Brenneman
, B.
, and Gurdal
, R. J.
, 1997, “Time Domain Solution of Fluid-Elastic Instability in Steam Generator Tubes
,” Proceedings of the ASME WAM Aerospace Division: Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. 53-2
, pp. 145
–151
.293.
Yetisir
, M.
, and Fisher
, N. J.
, 1997, “Prediction of Pressure Tube Fretting-Wear Damage Due to Fuel Vibration
,” Nucl. Eng. Des.
0029-5493, 176
(3
), pp. 261
–271
.294.
Yetisir
, M.
, McKerrow
, E.
, and Pettigrew
, M. J.
, 1998, “Fretting Wear Damage of Heat Exchanger Tubes: A Proposed Damage Criterion Based on Tube Vibration Response
,” ASME J. Pressure Vessel Technol.
0094-9930, 120
(3
), pp. 297
–305
.295.
Ko
, P. L.
, 1973, “Impact Fretting of Heat Exchanger Tubes
,” Atomic Energy Canada Ltd. Report No. AECL-4653.296.
Ko
, P. L.
, 1975, “Fundamental Studies of Steam Generator and Heat Exchanger Tube Fretting
,” Atomic Energy of Canada Limited, AECL Report No. 5310.297.
Ko
, P. L.
, 1979, “Experimental Studies of Tube Fretting in Steam Generators and Heat Exchangers
,” ASME J. Pressure Vessel Technol.
0094-9930, 101
, pp. 125
–133
.298.
Ko
, P. L.
, 1985a, “Heat Exchanger Tube Fretting Wear: Review and Application to Design
,” ASME J. Tribol.
0742-4787, 107
(2
), pp. 149
–156
.299.
Ko
, P. L.
, 1985b, “The Significance of Shear and Normal Force Components on Tube Wear Due to Fretting and Periodic Impacting
,” Wear
0043-1648, 106
(1–3
), pp. 261
–281
.300.
Ko
, P. L.
, 1985c, “Significance of Shear and Normal Force Components on Tube Wear Due to Fretting and Periodic Impacting
,” Atomic Energy Canada Ltd. Report No. AECL-8845.301.
Ko
, P. L.
, and Basista
, H.
, 1984, “Correlation of Support Impact Force and Fretting-Wear for a Heat Exchanger Tube
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, San Antonio, TX, Vol. PVP-82
, pp. 221
–233
.302.
Ko
, P. L.
, and Magel
, E.
, 1989, “Impact and Sliding Wear in Steam Generators and Heat Exchangers. New Experimental Test Rig and Wear Model
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Honolulu, HI, Vol. 154
, pp. 63
–69
.303.
Sauve
, R. G.
, and Teper
, W. W.
, 1982, “Nonlinear Dynamic-Impact Simulation of Process Equipment Tubes With Tube/Support Plate Interaction
,” Second International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Thermal-Hydraulics of Nuclear Reactors
, Santa Barbara, CA, Vol. 2
, pp. 740
–751
.304.
Taylor
, C. E.
, Pettigrew
, M. J.
, Axisa
, F.
, and Villard
, B.
, 1988, “Experimental Determination of Single- and Two-Phase Cross-Flow-Induced Forces on Tube Rows
,” ASME J. Pressure Vessel Technol.
0094-9930, 110
, pp. 22
–28
.305.
Jeong
, S. H.
, and Lee
, Y. Z.
, 2007, “Wear Characteristics of Tube-Support Components for a Nuclear Steam Generator Under Fretting Conditions
,” Solid State Phenom.
1012-0394, 120
, pp. 181
–186
.306.
Choi
, S. N.
, Yoon
, K. S.
, and Choi
, T. S.
, 2006, “An Analytical Method to Predict Fretting-Wear Damage in the Double 90 U-Bend Tubes
,” Proceedings of the 14th International Conference on Nuclear Engineering (ICONE)
, Miami, FL.307.
Tanaka
, H.
, and Takahara
, S.
, 1981, “Fluid Elastic Vibration of Tube Array in Cross-Flow
,” J. Sound Vib.
0022-460X, 77
, pp. 19
–37
.308.
Janzen
, V. P.
, Hagberg
, E. G.
, Patrick
, J. N. F.
, Pettigrew
, M. J.
, Taylor
, C. E.
, and Whan
, T. G.
, 2002, “Vibration and Work-Rate Measurements of Steam-Generator U-Tubes in Air-Water Cross-Flow
,” Proceedings of the ASME Fifth International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise
, Applied Mechanics Division, AMD, New Orleans, LA, Vol. 253
, No. 2, pp. 1019
–1032
.309.
Sinha
, J. K.
, Singh
, S.
, and Rao
, A. R.
, 2001, “Finite Element Simulation of Dynamic Behavior of an Open-Ended Cantilever Pipe Conveying Fluid
,” J. Sound Vib.
0022-460X, 240
(1
), pp. 189
–194
.310.
Pettigrew
, M. J.
, Yetisir
, M.
, Fisher
, N.
, Taylor
, C. E.
, and Smith
, B. A. W.
, 2008, “A Simple Energy Approach to Assess Vibration and Fretting-Wear Damage in Process Equipment
,” Proceedings of the 2007 ASME Pressure Vessels and Piping Conference on Fluid-Structure Interaction
, San Antonio, TX, Vol. 4
, pp. 281
–287
.311.
Jo
, J. C.
, and Jhung
, M. J.
, 2008, “Flow-Induced Vibration and Fretting-Wear Predictions of Steam Generator Helical Tubes
,” Nucl. Eng. Des.
0029-5493, 238
(4
), pp. 890
–903
.312.
Sauve
, R. G.
, Morandin
, G.
, and Savoia
, D.
, 1997, “Probabilistic Methods for the Prediction of Damage in Process Equipment Tubes Under Nonlinear Flow Induced Vibration
,” ASME Proceedings of the WAM Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. AD 53-2
, pp. 283
–289
.313.
Morandin
, G. D.
, and Sauve
, R. G.
, 2003, “Probabilistic Assessment of Fretting Wear in Steam Generator Tubes Under Flow Induced Vibrations
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Flow Induced Vibration
, Cleveland, OH, Vol. 465
, pp. 117
–125
.314.
Hadj-Sadok
, C.
, Payen
, T.
, and de Langre
, E.
, 1997, “Nonlinear Vibrations of Loosely Supported Tubes Excited by Fluidelastic and Turbulence Forces
,” Proceedings of the ASME WAM Fourth International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise
, Dallas, TX, Vol. AD 53-2
, pp. 193
–199
.315.
Hassan
, M.
, Weaver
, D.
, and Dokainish
, M.
, 2002, “A Simulation of the Turbulence Response of Heat Exchanger Tubes in Lattice-Bar Supports
,” J. Fluids Struct.
0889-9746, 16
(8
), pp. 1145
–1176
.316.
Hassan
, M. A.
, Weaver
, D. S.
, and Dokainish
, M. A.
, 2003, “The Effects of Support Geometry on the Turbulence Response of Loosely Supported Heat Exchanger Tubes
,” J. Fluids Struct.
0889-9746, 18
(5
), pp. 529
–554
.317.
Hassan
, M. A.
, Weaver
, D. S.
, and Dokainish
, M. A.
, 2005, “A New Tube/Support Impact Model for Heat Exchanger Tubes
,” J. Fluids Struct.
0889-9746, 21
(5–7
), pp. 561
–577
.318.
Mahmood
, F.
, and Hassan
, M.
, 2007, “Modeling of Fluidelastic Instability Forces in Fully Flexible Tube Arrays
,” Proceedings of the ASME 2007 Conference on Pressure Vessels and Piping, Fluid-Structure Interaction
, San Antonio, Texas, Vol. 4
, pp. 475
–483
.319.
Yetisir
, M.
, and Pettigrew
, M. J.
, 1999, “Simple Approach to Estimate Heat Exchanger Tube Fretting-Wear: Application to U-Bend Tubes
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Boston, MA, Vol. 389
, pp. 273
–282
.320.
Ciorneiu
, B.
, 1996, “Influence Of Some Parameters On The Tube Support-Interaction
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Fluid-Structure Interaction
, Montreal, CA, Vol. 337
, pp. 37
–45
.321.
Deininger
, J.
, Fischer
, M.
, and Strohneier
, K.
, 2002, “Calculation of Lateral Contact Stiffnesses of Tubes in Tube Bundle Heat Exchangers
,” Proceedings of the ASME Pressure Vessels and Piping Conference on Emerging Technologies in Fluids, Structures and Fluid/Structure Interactions
, Vancouver, BC, Canada, Vol. 446
, No. 2, pp. 235
–239
.322.
Chai
, Y. S.
, Bae
, J. W.
, and Lee
, C. Y.
, 2006, “Finite Element Analysis of Fretting Wear Under Various Contact Conditions
,” Key Eng. Mater.
1013-9826, 312
, pp. 375
–380
.323.
Lee
, C. Y.
, Tian
, L. S.
, Bae
, Y. W.
, and Chai
, Y.
, 2009, “Application of Influence Function Method on the Fretting Wear of Tube-To-Plate Contact
,” Tribol. Int.
0301-679X, 42
(6
), pp. 951
–957
.324.
Zhang
, X. M.
, 2002, “Parametric Studies of Coupled Vibration of Cylindrical Pipes Conveying Fluid With the Wave Propagation Approach
,” Comput. Struct.
0045-7949, 80
(3–4
), pp. 287
–295
.325.
Blevins
, R. D.
, 1978, “Fretting Wear of Heat Exchanger Tubes, Part I: Experiments
,” ASME
Paper No. JPGC-NE-8.326.
Blevins
, R. D.
, 1979b, “Fretting Wear of Heat Exchanger Tubes, Part II: Models
,” ASME J. Eng. Power
0022-0825, 101
(4
), pp. 630
–633
.327.
Ko
, P. L.
, Tromp
, J. H.
, and Weckwerth
, M. K.
, 1982, “Heat Exchanger Tube Fretting Wear: Correlation of Tube Motion and Wear
,” ASTM Symposium on Materials Evaluation Under Fretting Conditions
, Gaithersburg, MD, ASTM Special Technical Publication, pp. 86
–105
.328.
Levy
, G.
, and Morri
, J.
, 1985, “Impact-Fretting Wear in CO2-Based Environments
,” Wear
0043-1648, 106
, pp. 97
–138
.329.
Attia
, H.
, and Magel
, E.
, 1999, “Experimental Investigation of Long-Term Fretting Wear of a Multi-Span Steam Generator Tubes With U-Bend Sections
,” Wear
0043-1648, 225–229
, pp. 563
–574
.330.
Hofmann
, P. J.
, Schettler
, T.
, and Steininger
, D. A.
, 1986, “Pressurized Water Reactor Steam Generator Tube and Fatigue Wear Characteristics
,” ASME
Paper No. 86-PVP-2.331.
Hofmann
, P. J.
, and Schettler
, T.
, 1989, “PWR Steam Generator Tube Fretting and Fatigue Wear
,” EPRI Report No. EPRI-NP-6341.332.
Attia
, M. H.
, 1997, “Review and Assessment of the Work Rate Concept for Predicting Fretting Wear of Steam Generator Tubes
,” Ontario Hydro Technologies Technical Report No. A-NSG-94-35-P.333.
Chen
, S. S.
, Wambsganss
, M. W.
, and Rosenberg
, G. S.
, 1970, “On Tube-Baffle Impact During Heat Exchanger Tube Vibration
,” ASME Flow-Induced Vibration in Heat Exchangers
, New York
, pp. 27
–33
.334.
Guérout
, F. M.
, and Fisher
, N. J.
, 1999, “Steam Generator Fretting-Wear Damage: A Summary of Recent Findings
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Boston, MA, Vol. 389
, pp. 227
–234
.335.
Park
, J. S.
, Kim
, M. Y.
, Fisher
, N. J.
, and Guérout
, F. M.
, 2005, “Experimental Study on Fretting Wear Characteristics for SG Tube
,” Proceedings of the American Nuclear Society—International Congress on Advances in Nuclear Power Plants 2005, ICAPP’05
, Vol. 1
, pp. 263
–267
.336.
Hong
, S. M.
and Kim
, I. S.
, 2005, “Impact Fretting Wear of Alloy 690 Tubes at 25°C and 290°C
,” Wear
0043-1648, 259
(1–6
), pp. 356
–360
.337.
Burgess
, J. A.
, Jr., Au-Yang
, M. K.
, and Chandler
, C. K.
, 2006, “Nonlinear Time Domain Method to Predict Tube-to-Tube Support Plate Fretting Wear in Steam Generators
,” Proceedings of the ASME Pressure Vessels and Piping Conference
, Vancouver, BC, Vol. 9
, pp. 19
–28
.338.
Shin
, Y. S.
, Jendrzejczyk
, J. K.
, and Wambsganss
, M. W.
, 1977, “Vibration of a Heat Exchanger Tube With Tube/Support Impact
,” ASME
Paper No. 77-JPGC-NE-5.339.
Shin
, Y. S.
, Sass
, D. E.
, and Jendrzejczyk
, J. A.
, 1978, “Vibro-Impact Responses of a Tube With Tube-Baffle Interaction
,” ASME
Paper No. 78-PVP-20.340.
Guérout
, F. M.
, and Fisher
, N. J.
, 1999, “Steam Generator Fretting-Wear Damage: A Summary of Recent Findings
,” ASME J. Pressure Vessel Technol.
0094-9930, 121
(3
), pp. 304
–310
.341.
Choi
, S. N.
, Yoon
, K. S.
, Choi
, T. S.
, and Park
, S. K.
, 2001, “Fluid-Elastic Instability Prediction of Steam Generator Tubes for Operation at Reduced Temperature (ORT)
,” Proceedings of the ASME Pressure Vessels and Piping Division Conference on Flow-Induced Vibration: Cross-Flow Heat Exchangers
, Atlanta, GA, Vol. 420I
, pp. 35
–40
.342.
Kim
, D. G.
, and Lee
, Y. Z.
, 2001, “Experimental Investigation on Sliding and Fretting Wear of Steam Generator Tube Materials
,” Wear
0043-1648, 250
(1–12
), pp. 673
–680
.343.
Lee
, Y. H.
, Kim
, H. K.
, Kim
, H. D.
, Park
, C. Y.
, and Kim
, I. S.
, 2003, “A Comparative Study on the Fretting Wear of Steam Generator Tubes in Korean Power Plants
,” Wear
0043-1648, 255
(7–12
), pp. 1198
–1208
.344.
Jeong
, S. H.
, and Lee
, Y. Z.
, 2005, “Fretting Wear Characteristics of Tube-Support Components for a Steam Generator In Elevated Temperature
,” Proceedings of the World Tribology Congress III-2005
, Washington, DC, pp. 83
–84
.345.
Jeong
, S. H.
, Lee
, B. J.
, and Lee
, Y. Z.
, 2006, “Wear Transitions of Tube-Support Materials for a Nuclear Steam Generator Through Sliding Wear Test and Fretting Wear Test
,” Key Eng. Mater.
1013-9826, 321–323
, (I), pp. 430
–433
.346.
Jeong
, S. H.
, Park
, J. M.
, Lee
, J. H.
, and Lee
, Y. Z.
, 2006, “Wear Transitions of Tube-Support Components for a Nuclear Steam Generator Under Fretting Conditions
,” Key Eng. Mater.
1013-9826, 236–328
(2
), pp. 1263
–1266
.347.
Jang
, Y. K.
, Park
, N. K.
, Kim
, J. I.
, Kim
, K. T.
, Lee
, C. C.
, and Cho
, K. Z.
, 2006, “An Evaluation of Fuel Rod Fretting Wear in Spacer Grid With Conformal Shape
,” ASME
Paper No. PVP2006/ICPVT-11.348.
Park
, C. Y.
and Lee
, J. K.
, 2006, “Wear Scar Progression of Impact-Fretting at Elevated Temperature for Steam Generator Tubes in Nuclear Power Plants
,” Key Eng. Mater.
1013-9826, 236–328
, pp. 1251
–1254
.349.
Park
, C. Y.
, Lee
, J. K.
, Kim
, T. R.
, Cho
, S. Y.
, and Jeon
, H. I.
, 2007, “Crack Initiation Factor by Impact Fretting Wear at Inconel Alloy for Steam Generator Tube in Nuclear Power Plants
,” Proceedings of the Sixth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 6)
, Advanced Materials Research, Jeju Island, South Korea, Vols. 24
and 25, pp. 1269
–1272
.350.
Park
, C. Y.
, Lee
, J. K.
, and Kim
, T. R.
, 2008, “Wear Progress Model by Impact Fretting in Steam Generator Tube
,” Trans. Korean Soc. Mech. Eng. A
, 32
(10
), pp. 817
–822
.351.
Mahjoob
, M. J.
, Shahsvari
, A.
, and Marzban
, A.
, 2007, “A Vibration-Based Damage Detection Method for Pipes Conveying Fluid
,” Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
, Waikiki, HI, Vol. 8
, pp. 7799
–7806
.352.
Fox
, G. L.
, and Stepnewski
, D.
, 1974, “Pressure Wave Transmission in a Fluid Contained in a Plastically Deforming Pipe
,” ASME J. Pressure Vessel Technol.
0094-9930, 96
, pp. 258
–262
.353.
Youngdahl
, C. K.
, and Kot
, C. A.
, 1975, “Effect of Plastic Deformation of Piping on Fluid-Transient Propagation
,” Nucl. Eng. Des.
0029-5493, 35
, pp. 315
–325
.354.
Walker
, J. S.
, and Philips
, J. N.
, 1977, “Pulse Propagation in Fluid-Filled Tubes
,” ASME J. Appl. Mech.
0021-8936, 44
, pp. 31
–35
.355.
de Freitas Rachid
, F. B. F.
, Costa Mattos
, H.
, and Saldanha da Gama
, R. M.
, 1994, “Modeling of Hydraulic Transients in Damageable Elasto-Viscoplastic Piping Systems
,” Appl. Math. Model.
0307-904X, 18
, pp. 207
–215
.356.
Rachid
, F. B. F.
, and Costa Mattos
, H. S.
, 1998, “Modeling of Pipeline Integrity Taking Into Account the Fluid-Structure Interaction
,” Int. J. Numer. Methods Fluids
0271-2091, 28
, pp. 337
–355
.357.
Rachid
, F. B. F.
, and Costa Mattos
, H. S.
, 1998, “Modeling the Damage Induced by Pressure Transients in Elasto-Plastic Pipes
,” Meccanica
0025-6455, 33
, pp. 139
–160
.358.
Rachid
, F. B. F.
, and Costa Mattos
, H. S.
, 2002, “Modeling of the Fluid-Structure Interaction in Inelastic Piping Systems
,” J. Braz. Soc. Mech. Sci.
0100-7386, 24
, pp. 62
–69
.359.
Rachid
, F. B. F.
, 2005, “The Influence of Pipe Motion on the Integrity of Liquid-Filled Pipes Subjected to Pressure Transients
,” ASME
Paper No. PVP2005-71115.360.
Bastos
, F.
, and Rachid
, F. B. F.
, 2006, “Structural Integrity of Flexible Piping Systems Conveying Liquids
,” ASME J. Pressure Vessel Technol.
0094-9930, 128
(3
), pp. 341
–347
.361.
Chung
, J. S.
, and Felippa
, C. A.
, 1981, “Nonlinear Static Analysis of Deep Ocean Mining Pipe—2: Numerical Studies
,” ASME J. Energy Resour. Technol.
0195-0738, 103
(1
), pp. 16
–25
.362.
Deepak
, C. R.
, Shajahan
, M. A.
, Atmanand
, M. A.
, Annamalai
, K.
, Jeyamani
, R.
, Ravindran
, M.
, Schulte
, E.
, Handschuh
, R.
, Panthel
, J.
, Grebe
, H.
, and Schwarz
, W.
, 2001, “Development Tests on the Underwater Mining System Using Flexible Riser Concept
,” Proceedings of the Fourth ISOPE Ocean Mining Symposium
, International Society of Offshore and Polar Engineers, Cupertino, CA, pp. 94
–98
.363.
Xia
, J. N.
, Ni
, J. R.
, and Mendoza
, C.
, 2004, “Hydraulic Lifting of Manganese Nodules Through a Riser
,” ASME J. Offshore Mech. Arct. Eng.
0892-7219, 126
, pp. 72
–77
.364.
Aso
, K.
, Kan
, K.
, Doki
, H.
, and Natori
, T.
, 1995, “Effects of Vibration Absorbers With Nonlinear Springs on the Longitudinal Vibration of a Pipe String for Mining Manganese Nodules
,” Proceedings of the International Offshore and Polar Engineering Conference (ISOPE)
, The Hague, The Netherlands, Vol. 1
, pp. 303
.365.
Kobayashi
, Y.
, and Aso
, K.
, 1997, “Longitudinal Vibration-Control of Pipe String for Mining Manganese Nodules in Deep Sea With an Elastic Support
,” Proceedings of the International Offshore and Polar Engineering Conference (ISOPE)
, Honolulu, HI, Vol. 1
, pp. 128
–135
.366.
Cui
, G.
, and Aso
, K.
, 1998, “The Optimum Stepped-Pipe String With Vibration Absorbers for Mining Manganese Nodules, to Reduce Its Maximum Axial Stress
,” ASME J. Vibr. Acoust.
0739-3717, 120
, pp. 917
–921
.367.
Bar-Avi
, P.
, 2000, “Dynamic Response of Risers Conveying Fluid
,” ASME J. Offshore Mech. Arct. Eng.
0892-7219, 122
(3
), pp. 188
–193
.368.
Chang
, Y. J.
, Chen
, G. M.
, Sun
, Y. Y.
, Xu
, L. B.
, and Peng
, P.
, 2008, “Nonlinear Dynamic Analysis of Deep-Water Drilling Risers Subjected to Random Loads
,” China Ocean Eng.
0890-5487, 22
(4
), pp. 683
–691
.369.
Kaewunruen
, S.
, Chiravatchradej
, J.
, and Chucheepsakul
, S.
, 2005, “Nonlinear Free Vibrations of Marine Risers/Pipes Transporting Fluid
,” Ocean Eng.
0029-8018, 32
(3–4
), pp. 417
–440
.370.
Kaewunruen
, S.
, McCarthy
, T.
, Leklong
, J.
, and Chucheepsakul
, S.
, 2008, “Influence of Joint Stiffness on the Free Vibrations of a Marine Riser Conveying Fluid
,” Proceedings of the Eighth ISOPE Pacific/Asia Offshore Mechanics Symposium
, Bangkok, Thailand, pp. 113
–120
.371.
Bao
, R. D.
, Bi
, W. J.
, and Tang
, L. M.
, 2008a, “Differential-Quadrature Method to Analyze Natural Characteristics of Submarine Fluid Conveying Pipeline
,” J. Vibr. Shock
, 27
(11
), pp. 73
–76
.372.
Lin
, W.
, and Qiao
, N.
, 2008, “Vibration and Stability of an Axially Moving Beam Immersed in Fluid
,” Int. J. Solids Struct.
0020-7683, 45
(5
), pp. 1445
–1457
.373.
Santus
, C.
, 2008, “Fretting Fatigue of Aluminum Alloy in Contact With Steel in Oil Drill Pipe Connections, Modeling to Interpret Test Results
,” Int. J. Fatigue
0142-1123, 30
(4
), pp. 677
–688
.374.
Lubbad
, R. K.
, Lset
, S.
, Gudmestad
, O. T.
, Trum
, A.
, and Moe
, G.
, 2007, “Vortex Induced Vibrations of Slender Marine Risers—Effects of Round-Sectioned Helical Strakes
,” Proceedings of the 17th International Offshore and Polar Engineering Conference (ISOPE)
, Lisbon, Portugal, pp. 2772
–2780
.375.
Chan
, H. H.
, Wilmshurst
, S. R.
, Ellinas
, C. P.
, and Moros
, T.
, 2000, “Deep-Water Riser Systems: Riser Local Impact
,” Proceedings of the Tenth International Offshore and Polar Engineering Conference (ISOPE)
, Seattle, WA, Vol. 2
, pp. 653
–660
.376.
Wilmshurst
, S. R.
, Chan
, H. H.
, Ellinas
, C. P.
, and Moros
, T.
, 2001, “Local Riser Impact: F.E. Model Validation Using Laboratory Impact Tests
,” Proceedings of the 11th International Offshore and Polar Engineering Conference (ISOPE)
, Stavanger, Norway, Vol. 2
, pp. 254
–260
.377.
Wilmshurst
, S. R.
, Chan
, H. H.
, Ellinas
, C. P.
, and Moros
, T.
, 2001, “Local Riser Impact: The Effect of Neoprene Coatings
,” Proceedings of the 11th International Offshore and Polar Engineering Conference (ISOPE)
, Stavanger, Norway, Vol. 2
, pp. 261
–267
.378.
Brinkmann
, C. R.
, and Whooley
, K. T.
, 2002, “Design Study of a Deep-Water Compliant Vertical Access Riser for the Gulf of Mexico
,” Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Oslo, Norway, Vol. 1
, pp. 735
–743
.379.
Da Silveira
, L. M. Y.
, Cunha
, L. D.
, De Martins
, C. A.
, and Pesce
, C. P.
, 2007, “An Investigation on the Effect of Tension Variation on VIV of Risers
,” Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, San Diego, CA, Vol. 1
, pp. 267
–275
.380.
Wilson
, J. F.
, and Biggers
, S. B.
, 1974, “Response of Submerged, Inclined Pipelines Conveying Mass
,” ASME J. Eng. Ind.
0022-0817, 96
, pp. 1141
–1146
.381.
Felippa
, C. A.
, and Chung
, J. S.
, 1981, “Nonlinear Static Analysis of Deep Ocean Mining Pipe, Part I: Modeling and Formulation
,” ASME J. Energy Resour. Technol.
0195-0738, 103
, pp. 11
–15
.382.
Chung
, J.
, Whitney
, A. K.
, and Loden
, W. A.
, 1981, “Nonlinear Transition Motion of Deep Ocean Mining Pipe
,” ASME J. Energy Resour. Technol.
0195-0738, 103
, pp. 2
–10
.383.
Chung
, J.
, and Whitney
, A. K.
, 1983, “Axial Stretching Oscillation of an 18,000-ft Vertical Pipe in the Ocean
,” ASME J. Energy Resour. Technol.
0195-0738, 105
, pp. 195
–200
.384.
Whitney
, A. K.
, Chung
, J. S.
, and Yu
, B. K.
, 1981, “Vibrations of Long Marine Pipes Due to Vortex Shedding
,” ASME J. Energy Resour. Technol.
0195-0738, 103
, pp. 231
–236
.385.
Kwong
, A. H. M.
and Edge
, K. A.
, 1996, “Structure-Borne Noise Prediction in Liquid-Conveying Pipe Systems
,” Proc. Inst. Mech. Eng., Part I (J. Systems and Control Engineering)
, 210
(I3
), pp. 189
–200
.386.
Kwong
, A. H. M.
and Edge
, K. A.
, 1998, “A Method to Reduce Noise in Hydraulic Systems by Optimizing Pipe Clamp Locations
,” Proc. Inst. Mech. Eng., Part I: J. Systems and Control
, 212
(I4
), pp. 267
–280
.387.
Yamamoto
, C. T.
, Meneghini
, J. R.
, Saltara
, F.
, Ferrari
, J. A.
, Jr., and Martins
, C. A.
, 2001, “Hydroelastic Response of Offshore Risers Using CFD
,” Proceedings of the International Conference Offshore Mechanics and Arctic Engineering—OMAE
, Rio de Janeiro, Brazil, Vol. 1
, pp. 125
–131
.388.
Yamamoto
, C. T.
, Fregonesi
, R. A.
, Meneghini
, J. R.
, Saltara
, F.
, and Ferrari
, J. A.
, Jr., 2002, “Numerical Simulations of the Flow Around Flexible Cylinders
,” Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering—OMAE
, Oslo, Norway, Vol. 1
, pp. 313
–320
.389.
Yamamoto
, C. T.
, Fregonesi
, R. A.
, Meneghini
, J. R.
, Saltara
, F.
, and Ferrari
, J. A.
, Jr., 2002, “Numerical Simulations of Vortex-Induced Vibration of Flexible Cylinders
,” Proceedings of the ASME Fifth International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise
, New Orleans, LA, AMD Vol. 253
(1
), pp. 445
–454
.390.
Yamamoto
, C. T.
, Meneghini
, J. R.
, Saltara
, F.
, Fregonesi
, R. A.
, and Ferrari
, J. A.
, Jr., 2004, “Numerical Simulations of Vortex-Induced Vibration on Flexible Cylinders
,” J. Fluids Struct.
0889-9746, 19
(4
), pp. 467
–489
.391.
Fujarra
, A. L. C.
, Pesce
, C. P.
, Flemming
, F.
, and Williamson
, C. H. K.
, 2001, “Vortex-Induced Vibration of a Flexible Cantilever
,” J. Fluids Struct.
0889-9746, 15
, pp. 651
–658
.392.
Doaré
, O.
, and De Langre
, E.
, 2002, “The Flow-Induced Instability of Long Hanging Pipes
,” Eur. J. Mech. A/Solids
0997-7538, 21
, pp. 857
–867
.393.
Doaré
, O.
, and De Langre
, E.
, 2002, “Effect of Length on the Instability of Hanging Pipes
,” ASME
Paper No. IMECE2002-39018.394.
Doaré
, O.
, and De Langre
, E.
, 2002, “Local and Global Instability of Fluid-Conveying Pipes on Elastic Foundations
,” J. Fluids Struct.
0889-9746, 16
, pp. 1
–14
.395.
Doaré
, O.
, and De Langre
, E.
, 2006, “The Role of Boundary Conditions in the Instability of One-Dimensional Systems
,” Eur. J. Mech. B/Fluids
0997-7546, 25
(6
), pp. 948
–959
.396.
Shilling
, R. B.
, III, and Lou
, Y. K.
, 1978, “Effect of Internal-Flow on the Dynamic Responses of a Cantilever Pipe
,” ASME
Paper No. 78-Pet-57.397.
Shilling
, R.
, III, and Lou
, Y. K.
, 1980, “An Experimental Study on the Dynamic Response of a Vertical Cantilever Pipe Conveying Fluid
,” ASME J. Energy Resour. Technol.
0195-0738, 102
, pp. 129
–135
.398.
Irani
, M. B.
, Modi
, V. J.
, and Welt
, F.
, 1987, “Riser Dynamics With Internal Flow and Nutation Damping
,” Proceedings of the Sixth International Offshore Mechanics and Arctic Engineering Symposium
, Houston, TX, Vol. 1
, pp. 119
–125
.399.
Moe
, G.
, and Chucheepsakul
, S.
, 1988, The Effect of Internal Flow on Marine Risers
, Proceedings of the Seventh International Offshore Mechanics and Arctic Engineering Symposium
, Houston, Texas, Vol. 1
, pp. 375
–382
.400.
Moe
, G.
, Stromsem
, K. C.
, and Fylling
, I.
, 1994, “Behavior of Risers With Internal Flow Under Various Boundary Conditions
,” Proceedings of the Fourth International Offshore and Polar Engineering Conference (ISOPE)
, Osaka, Japan, pp. 258
–262
.401.
Otsuka
, K.
, Bando
, A.
, and Ikeda
, Y.
, 1999, “Effects of Internal Flow on Dynamics of Deep Seawater Risers
,” Proceedings of the Third International Offshore and Polar Engineering Conference (ISOPE) on Ocean Mining Symposium
, Goa, India, pp. 30
–35
.402.
Morooka
, C. K.
, Coellho
, F. M.
, Kubota
, H. Y.
, Ferrari
, J. A.
, Jr., and Ribeiro
, E. J. B.
, 2004, “Investigations on the Behavior of Vertical Production Risers
,” Proceedings of the 23rd International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Vancouver, BC, Canada, Vol. 1
(A), pp. 393
–401
.403.
Otsuka
, K.
, Bando
, A.
, and Ikeda
, Y.
, 2000, “Memory Effects on Dynamics of Risers for Upwelling Deep Ocean Water
,” Proceedings of the Tenth International Offshore and Polar Engineering Conference (ISOPE)
, Seattle, WA, Vol. 2
, pp. 15
–22
.404.
Monprapussorn
, T.
, Chucheepsakul
, S.
, and Huang
, T.
, 2004, “The Coupled Radial-Axial Deformations Analysis of Flexible Pipes Conveying Fluid
,” Int. J. Numer. Methods Eng.
0029-5981, 59
(11
), pp. 1399
–1452
.405.
Seyed
, F. B.
, and Patel
, M. H.
, 1992, “Considerations in Design of Flexible Riser Systems
,” Proceedings of the Second International Offshore and Polar Engineering Conference (ISOPE)
, San Francisco, CA, pp. 300
–307
.406.
Hong
, N.
, and Huh
, T.
, 1999, “Effect of Internal Flow on Vortex-Induced Vibration Of Riser
,” Proceedings of the Ninth International Offshore and Polar Engineering Conference (ISOPE)
, Brest, France, Vol. 3
, pp. 688
–693
.407.
Guo
, H. Y.
, Wang
, S. Q.
, Wu
, J. N.
, and Liu
, D. F.
, 2000, “Dynamic Characteristics of Marine Risers Conveying Fluid
,” China Ocean Eng.
0890-5487, 14
, pp. 153
–160
.408.
Guo
, H. Y.
, Wang
, Y. B.
, and Fu
, Q.
, 2004, “Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers
,” China Ocean Eng.
0890-5487, 18
(1
), pp. 11
–20
.409.
Guo
, H. Y.
, Fu
, Q.
, and Lou
, M.
, 2005, “Vortex-Induced Vibrations and Fatigue Life of Marine Risers Conveying Flowing Fluid
,” Gongcheng Lixue/Eng. Mech.
, 22
(4
), pp. 220
–224
.410.
Lou
, M.
, Ding
, J.
, Guo
, H. Y.
, and Dong
, X. L.
, 2005, “Effect of Internal Flow on Vortex-Induced Vibration of Submarine Free Spanning Pipelines
,” China Ocean Eng.
0890-5487, 19
(1
), pp. 147
–154
.411.
Guo
, H. Y.
, Luo
, M.
, and Dong
, X. L.
, 2006, “Experimental Study on Vortex-Induced Vibration of Risers Transporting Fluid
,” Proceedings of the 16th International Offshore and Polar Engineering Conference (ISOPE)
, San Francisco, CA, pp. 820
–823
.412.
Guo
, H. Y.
, Li
, X. M.
, and Liu
, X. C.
, 2008, “Numerical Prediction of Vortex-Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow
,” China Ocean Eng.
0890-5487, 22
(4
), pp. 675
–682
.413.
Guo
, H. Y.
, and Lou
, M.
, 2008, “Experimental Study on Coupled Cross-Flow and In-Line Vortex-Induced Vibration of Flexible Risers
,” China Ocean Eng.
0890-5487, 22
(1
), pp. 123
–129
.414.
Aso
, K.
, and Kan
, K.
, 1986, “Behavior of a Pipe String in the Deep Sea
,” Proceedings of the Fifth Offshore Mechanics and Arctic Engineering (OMAE) Symposium
, Tokyo, Japan, Vol. II
, pp. 491
–498
.415.
Herfjord
, K.
, Drange
, S. O.
, and Kvamsdal
, T.
, 1998, “Assessment of Vortex-Induced Vibrations on Deep Water Risers by Considering Fluid-Structure Interaction
,” Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Lisbon, Portugal, Paper No. OMAE98-0506.416.
Mark Chang
, S. H.
, Stone
, B. A.
, and Vernotzy
, R.
, Fisher
, E.
, and Thompson
, H.
, 2001, “Dynamic Response and Vortex Induced Vibration of a Freestanding Drilling Riser in Deep Water
,” Proceedings of the 20th International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Rio de Janeiro, Brazil, Vol. 1
, pp. 353
–361
.417.
Tan
, Z. M.
, Sheldrake
, T.
, Ethridge
, A.
, and Clements
, R.
, 2004, “Analysis of Flow Induced Vibrations Effect on Service Life of Unbonded Flexible Pipe
,” Proceedings of the ASME 23rd International Conference on Offshore Mechanics and Arctic Engineering—OMAE
, Vancouver, BC, Vol. 3
, pp. 87
–94
.418.
Baarholm
, G. S.
, Larsen
, C. M.
, Lie
, H.
, Mrk
, K.
, and Meling
, T. S.
, 2004, “Simplified Model for Evaluation of Fatigue From Vortex Induced Vibrations of Marine Risers
,” Proceedings of the 23rd International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Vancouver, BC, Canada, Vol. 3
, pp. 799
–806
.419.
Sches
, C.
, Hill
, J. W.
, Massaglia
, J.
, Peter
, T.
, and Lepine
, F.
, 2007, “Fatigue Resistant Threaded and Coupled Connectors: The New Standard for Deep-Water Riser Applications
,” Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, San Diego, CA, Vol. 1
, pp. 285
–295
.420.
Constantinides
, Y.
, Holmes
, S.
, and Oakley
, O. H.
, Jr., 2006, “Analysis of Turbulent Flows and VIV of Truss Spar Risers
,” Proceedings of the 25th International Conference Mechanics and Arctic Engineering (OMAE)
, Hamburg, Germany.421.
Jung
, J. J.
, Korobkin
, A. A.
, Shin
, H. S.
, and Lee
, W. S.
, 2006, “Coupled Dynamic Analysis of Vessel/Risers System Including VIV
,” Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, Hamburg, Germany.422.
Rho
, J. B.
, Korobkin
, A. A.
, and Jung
, J. J.
, 2007, “Coupled Analysis of Deep-Water Floating System Including VIV in Time Domain
,” Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering (OMAE)
, San Diego, CA, Vol. 1
, pp. 639
–649
.423.
Monprapussorn
, T.
, Athisakul
, C.
, and Chucheepsakul
, S.
, 2007, “Nonlinear Vibrations of an Extensible Flexible Marine Riser Carrying a Pulsatile Flow
,” ASME J. Appl. Mech.
0021-8936, 74
(4
), pp. 754
–769
.424.
Chatjigeorgiou
, I. K.
, and Mavrakos
, S. A.
, 2005, “Nonlinear Resonances of Parametrically Excited Risers—Numerical and Analytic Investigation for Ω=2ω1
,” Comp. Struct.
, 83
(8–9
), pp. 560
–573
.425.
Perotin
, L.
, and Granger
, S.
, 1992, “Numerical Model for Fluid-Structure Coupling of a Confined Cylinder Submitted to an Axial Annular Flow
,” Proceedings of the ASME WAM Pressure Vessels and Piping Division: Axial and Annular Flow-Induced Vibration and Instabilities
, Anaheim, CA. Vol. 244
, pp. 1
–16
.426.
Zhang
, Q.
, Miska
, S.
, Kuru
, E.
, and Azar
, J. J.
, 2000, “Critical Flow Rate for the Buckling of Non-Rotating Drill-Pipe Conveying Fluid in Vertical Holes
,” Proceedings of the 2000 Society of Petroleum Engineers (SPE) Annual Technical Conference and Exhibition on Drilling and Completion
, Dallas, TX, pp. 687
–700
.427.
Païdoussis
, M. P.
, Luu
, T. P.
, and Prabhakar
, S.
, 2008, “Dynamics of a Long Tubular Cantilever Conveying Fluid Downwards, Which Then Flows Upwards Around the Cantilever as a Confined Annular Flow
,” J. Fluids Struct.
0889-9746, 24
(1
), pp. 111
–128
.428.
Leklong
, J.
, Chucheepsakul
, S.
, and Kaewunruen
, S.
, 2008, “Dynamic Responses of Marine Risers/Pipes Transporting Fluid Subject to Top End Excitations
,” Proceedings of the Eighth International Society of Offshore and Polar Engineers (ISOPE) Pacific/Asia Offshore Mechanics Symposium
, Bangkok, Thailand, pp. 105
–112
.429.
Païdoussis
, M. P.
, 2005, “Some Unresolved Issues in Fluid-Structure Interactions
,” J. Fluids Struct.
0889-9746, 20
, pp. 871
–890
.430.
Hongwu
, C.
and Junji
, T.
, 1996, “Effect of Boundary Conditions on the Stability of a Cantilever Pipe Discharging and Aspirating Fluid
,” JSME Int. J., Ser. C
1340-8062, 39
, pp. 20
–24
.431.
Païdoussis
, M. P.
, 1998, Fluid-Structure Interactions: Slender Structures and Axial Flow
, Academic
, London
, Vol. 1
.432.
Tikhonov
, V. S.
, 1991, “The Dynamic Stability of a Vertical Aspirating Pipe Conveying a Steady Slurry Flow
,” Fluid Mech.-Sov. Res.
0096-0764, 20
(3
), pp. 121
–127
.433.
Kangaspuoskari
, M.
, Laukkanen
, J.
, and Pramila
, A.
, 1993, “The Effect of Feedback Control on Critical Velocity of Cantilevered Pipes Aspirating Fluid
,” J. Fluids Struct.
0889-9746, 7
, pp. 707
–715
.434.
Païdoussis
, M. P.
, 1999, “Aspirating Pipes Do Not Flutter at Infinitesimally Small Flow
,” J. Fluids Struct.
0889-9746, 13
, pp. 419
–425
.435.
Kuiper
, G. L.
, and Metrikine
, A. V.
, 2005, “Effect of Hydrodynamic Drag on the Stability of a Cantilever Pipe Conveying Fluid
,” Fluid Structure Interaction and Moving Boundary Problems
, Vol. 84
, Witpress
, Southampton, UK
, pp. 175
–184
.436.
Kuiper
, G. L.
, and Metrikine
, A. V.
, 2005, “Dynamic Stability of a Submerged, Free Hanging Riser Conveying Fluid
,” J. Sound Vib.
0022-460X, 280
, pp. 1051
–1065
.437.
Païdoussis
, M. P.
, Semler
, C.
, and Wadham-Gagnon
, M.
, 2005, “A Reappraisal of Why Aspirating Pipes Do Not Flutter at Infinitesimal Flow
,” J. Fluids Struct.
0889-9746, 20
, pp. 147
–156
.438.
Kuiper
, G. L.
, Metrikine
, A. V.
, and Battjes
, J. A.
, 2007, “A New Time-Domain Drag Description and Its Influence on the Dynamic Behavior of a Cantilever Pipe Conveying Fluid
,” J. Fluids Struct.
0889-9746, 23
(3
), pp. 429
–445
.439.
Kuiper
, G.
, Metrikine
, A.
, and Efthymiou
, M.
, 2007, “Experimental Investigation of the Dynamic Behavior of a Water Intake Riser
,” Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering—OMAE
, San Diego, CA, Vol. 1
, pp. 479
–488
.440.
Kuiper
, G. L.
, and Metrikine
, A. V.
, 2008, “Experimental Investigation of Dynamic Stability of a Cantilever Pipe Aspirating Fluid
,” J. Fluids Struct.
0889-9746, 24
(4
), pp. 541
–558
.441.
Qian
, Q.
, Lin
, W.
, Ni
, Q.
, and Huang
, Y. Y.
, 2008, “Some Unresolved Issues in Ocean Pipes Aspirating Fluid
,” China Ocean Eng.
0890-5487, 22
(1
), pp. 171
–180
.442.
Jung
, D. H.
, Park
, H. L.
, and Koterayama
, W.
, 2003, “A Numerical and Experimental Study on Dynamics of a Highly Flexible Free Hanging Pipe in Water
,” Proceedings of the 13th International Offshore and Polar Engineering Conference (ISOPE)
, Honolulu, HI, pp. 645
–651
.443.
Iijima
, S.
, 1991, “Helical Microtubules of Graphite Carbon
,” Nature (London)
0028-0836, 354
, pp. 56
–58
.444.
Hanasaki
, I.
, and Nakatani
, A.
, 2006, “Water Flow Through Carbon Nanotube Junctions as Molecular Convergent Nozzles
,” Nanotechnology
0957-4484, 17
, pp. 2794
–2804
.445.
Gibson
, R. F.
, Ayorinde
, E. O.
, and Wen
, Y. F.
, 2007, “Vibrations of Carbon Nanotubes and Their Composites: A Review
,” Compos. Sci. Technol.
0266-3538, 67
, pp. 1
–28
.446.
Poncharal
, P.
, Wang
, Z. L.
, Ugarte
, D.
, and Heer
, W. A.
, 1999, “Electrostatic Deflections and Electromechanical Resonances of Carbon Nanotubes
,” Science
0036-8075, 283
, pp. 1513
–1516
.447.
Ru
, C. Q.
, 2004, “Elastic Models for Carbon Nanotubes
,” Encyclopedia of Nanoscience and Nanotechnology
, Vol. 2
, H. S.
Nalwa
, ed., American Scientific
, Stevenson Ranch, CA
, pp. 731
–744
.448.
Zhang
, L.
, Ni
, Q. Q.
, Natsuki
, T.
, and Fu
, Y.
, 2009, “Carbon Nanotubes/Magnetite Hybrids Prepared by a Facile Synthesis Process and Their Magnetic Properties
,” Appl. Surf. Sci.
0169-4332, 255
(20
), pp. 8676
–8681
.449.
Qiao
, N.
, Lin
, W.
, and Qian
, Q.
, 2005, “Chaotic Transients In A Curved Fluid Conveying Tube
,” Acta Mechanica Solida Sinica
, 18
(3
), pp. 207
–214
.450.
Wang
, L.
, Ni
, Q.
, Li
, M.
, and Qian
, Q.
, 2008, “The Thermal Effect on Vibration and Instability of Carbon Nanotubes Conveying Fluid
,” Physica E (Amsterdam)
1386-9477, 40
(10
), pp. 3179
–3182
.451.
Yoon
, J.
, Ru
, C. Q.
, and Mioduchowski
, A.
, 2003, “Vibration of an Embedded Multiwall Carbon Nanotube
,” Compos. Sci. Technol.
0266-3538, 63
, pp. 1533
–1542
.452.
Yoon
, J.
, Ru
, C. Q.
, and Mioduchowski
, A.
, 2005, “Vibration and Instability of Carbon Nanotubes Conveying Fluid
,” Compos. Sci. Technol.
0266-3538, 65
(9
), pp. 1326
–1336
.453.
Ru
, C. Q.
, Yoon
, J.
, and Mioduchowski
, A.
, 2006, “Flow-Induced Flutter Instability of Cantilever Carbon Nanotubes
,” Int. J. Solids Struct.
0020-7683, 43
(11–12
), pp. 3337
–3349
.454.
Reddy
, C. D.
, Lu
, C.
, Rajendran
, S.
, and Liew
, K. M.
, 2007, “Free Vibration Analysis of Fluid-Conveying Single-Walled Carbon Nanotubes
,” Appl. Phys. Lett.
0003-6951, 90
(13
), p. 133122
.455.
Zhang
, H. W.
, Zhang
, Z. Q.
, Wang
, L.
, Zheng
, Y. G.
, Wang
, J. B.
, and Wang
, Z. K.
, 2007, “Pressure Control Model for Transport of Liquid Mercury in Carbon Nanotubes
,” Appl. Phys. Lett.
0003-6951, 90
(14
), p. 144105
.456.
Natuski
, T.
, Ni
., Q. Q.
, and Endo
, M.
, 2007, “Wave Propagation in Single- and Double-Walled Carbon Nanotubes Filled With Fluids
,” J. Appl. Phys.
0021-8979, 101
(3
), p. 034317
.457.
Dong
, K.
, Liu
, B. Y.
, and Wang
, X.
, 2008, “Wave Propagation in Fluid-Filled Multi-Walled Carbon Nanotubes Embedded in Elastic Matrix
,” Comput. Mater. Sci.
0927-0256, 42
(1
), pp. 139
–148
.458.
Natsuki
, T.
, Ni
, Q. Q.
, and Endo
, M.
, 2009,”Analysis of the Vibration Characteristics of Fluid-Conveying Double-Walled Carbon Nanotubes
,” J. Appl. Phys.
0021-8979, 105
(9
), p. 094328
.459.
Wang
, L.
, 2009, “Dynamical Behaviors of Double-Walled Carbon Nanotubes Conveying Fluid Accounting for the Role of Small Length Scale
,” Comput. Mater. Sci.
0927-0256, 45
(2
), pp. 584
–588
.460.
Yakobson
, B. I.
, Barbec
, C. J.
, and Bernholc
, J.
, 1996, “Nanomechanics of Carbon Tubes: Instabilities Beyond Linear Response
,” Phys. Rev. Lett.
0031-9007, 76
, pp. 2511
–2514
.461.
He
, X. Q.
, Kitipornchai
, S.
, Wang
, C. M.
, and Liew
, K. M.
, 2005b, “Modeling of van der Waals Force Infinitesimal Deformation of Multi-Walled Carbon Nanotubes Treated as Cylindrical Shells
,” Int. J. Solids Struct.
0020-7683, 42
, pp. 6032
–6047
.462.
Liew
, K. M.
, Wong
, C. H.
, He
, X. Q.
, Tan
, M. J.
, and Meguid
, S. A.
, 2004, “Nanomechanics of Single and Multi-Walled Carbon Nanotubes
,” Phys. Rev. B
0163-1829, 69
, p. 115429
.463.
Mahan
, G. D.
, 2002, “Oscillations of a Thin Hollow Cylinder: Carbon Nanotubes
,” Phys. Rev. B
0163-1829, 65
, pp. 235402
.464.
Rao
, A. M.
, Chen
, J.
, Richter
, E.
, Schlecht
, U.
, Eklund
, P. C.
, Haddon
, R. C.
, Venkateswaran
, U. D.
, Kwon
, Y. K.
, and Tomanek
, D.
, 2001, “Effect of van der Waals Interaction on the Raman Modes in Single Walled Carbon Nanotubes
,” Phys. Rev. Lett.
0031-9007, 86
, pp. 3895
–3898
.465.
Garg
, A.
, Han
, J.
, and Sinnott
, S.
, 1998, “Interactions of Carbon-Nanotubule Proximal Probe Tips With Diamond and Grapheme
,” Phys. Rev. Lett.
0031-9007, 81
, pp. 2260
–2263
.466.
Treacy
, M. M. J.
, Ebbesen
, T. W.
, and Gibson
, J. M.
, 1996, “Exceptionally High Young’s Modulus Observed for Individual Carbon Nanotubes
,” Nature (London)
0028-0836, 381
, pp. 678
.467.
Yoon
, J.
, Ru
, C. Q.
, and Mioduchowski
, A.
, 2004, “Timoshenko-Beam Effects on Transverse Wave Propagation in Carbon Nanotube
,” Composites, Part B
1359-8368, 35
, pp. 87
–93
.468.
Gogotsi
, Y.
, 2001, “In Situ Multiphase Fluid Experiments in Hydrothermal CNTs
,” Appl. Phys. Lett.
0003-6951, 79
, pp. 1021
–1023
.469.
He
, X. Q.
, Kitipornchai
, S.
, and Liew
, K. M.
, 2005a, “Buckling Analysis of Multi-Walled Carbon Nanotubes: A Continuum Model Accounting for van der Waals Interaction
,” J. Mech. Phys. Solids
0022-5096, 53
, pp. 303
–326
.470.
He
, X. Q.
, Wang
, C. M.
, Yan
, Y.
, Zhang
, L. X.
, and Nie
, G. H.
, 2008, “Pressure Dependence of the Instability of Multiwalled Carbon Nanotubes Conveying Fluids
,” Arch. Appl. Mech.
0939-1533, 78
, pp. 637
–648
.471.
Ru
, C. Q.
, 2002, “Intrinsic Vibration of Multiwalled Carbon Nanotubes
,” Int. J. Nonlinear Science and Numerical Simulations
, 3
(3–4
), pp. 735
–746
.472.
Yoon
, J.
, Ru
, C. Q.
, and Mioduchowski
, A.
, 2002, “Noncoaxial Resonance of an Isolated Multiwall Carbon Nanotube
,” Phys. Rev. B
0163-1829, 66
, p. 233402
.473.
Wang
, L.
, Qiao
, N.
, and Li
, M.
, 2008, “Buckling Instability of Double-Wall Carbon Nanotubes Conveying Fluid
,” Comput. Mater. Sci.
0927-0256, 44
(2
), pp. 821
–825
.474.
Rasekh
, M.
, and Khadem
, S. E.
, 2009, “Nonlinear Vibration and Stability Analysis of Axially Loaded Embedded Carbon Nanotubes Conveying Fluid
,” J. Phys. D: Appl. Phys.
0022-3727, 42
(13
), p. 135112
.475.
Yan
, Y.
, He
, X. Q.
, Zhang
, L. X.
, and Wang
, C. M.
, 2009, “Dynamic Behavior of Triple-Walled Carbon Nanotubes Conveying Fluid
,” J. Sound Vib.
0022-460X, 319
(3–5
), pp. 1003
–1018
.476.
Lee
, H. L.
and Chang
, W. J.
, 2009, “Vibration Analysis of Fluid-Conveying Double-Walled Carbon Nanotubes Based on Nonlocal Elastic Theory
,” J. Phys.: Condens. Matter
0953-8984, 21
(11
), p. 115302
.477.
Chang
, W. J.
, and Lee
, H. L.
, 2009, “Free Vibration of a Single-Walled Carbon Nanotube Containing a Fluid Flow Using the Timoshenko Beam Model
,” Phys. Lett. A
0375-9601, 373
(10
), pp. 982
–985
.478.
Kuang
, Y. D.
, He
, X. Q.
, Chen
, C. Y.
, and Li
, G. Q.
, 2009, “Analysis of Nonlinear Vibrations of Double-Walled Carbon Nanotubes Conveying Fluid
,” Comput. Mater. Sci.
0927-0256, 45
(4
), pp. 875
–880
.Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.
