An experimental study on the underwater buckling of composite and metallic tubes is conducted to evaluate and compare their collapse mechanics. Experiments are performed in a pressure vessel designed to provide constant hydrostatic pressure through the collapse. Filament-wound carbon-fiber/epoxy, glass/polyester (PE) tubes, and aluminum tubes are studied to explore the effect of material type on the structural failure. Three-dimensional digital image correlation (DIC) technique is used to capture the full-field deformation and velocities during the implosion event. Local pressure fields generated by the implosion event are measured using dynamic pressure transducers to evaluate the strength of the emitted pressure pulse. The results show that glass/PE tubes release the weakest pressure pulse and carbon/epoxy tubes release the strongest upon collapse. In each case, the dominating mechanisms of failure control the amount of flow energy released.
Skip Nav Destination
Article navigation
December 2016
Research-Article
Experimental Investigation on Underwater Buckling of Thin-Walled Composite and Metallic Structures
Michael Pinto,
Michael Pinto
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Search for other works by this author on:
Helio Matos,
Helio Matos
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Search for other works by this author on:
Sachin Gupta,
Sachin Gupta
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Search for other works by this author on:
Arun Shukla
Arun Shukla
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
e-mail: shuklaa@uri.edu
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
e-mail: shuklaa@uri.edu
Search for other works by this author on:
Michael Pinto
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Helio Matos
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Sachin Gupta
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
Arun Shukla
Dynamic Photomechanics Laboratory,
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
e-mail: shuklaa@uri.edu
Department of Mechanical,
Industrial and Systems Engineering,
University of Rhode Island,
Kingston, RI 02881
e-mail: shuklaa@uri.edu
1Corresponding author.
Contributed by the Pressure Vessel and Piping Division of ASME for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received August 26, 2015; final manuscript received January 26, 2016; published online July 18, 2016. Editor: Young W. Kwon.
J. Pressure Vessel Technol. Dec 2016, 138(6): 060905 (8 pages)
Published Online: July 18, 2016
Article history
Received:
August 26, 2015
Revised:
January 26, 2016
Citation
Pinto, M., Matos, H., Gupta, S., and Shukla, A. (July 18, 2016). "Experimental Investigation on Underwater Buckling of Thin-Walled Composite and Metallic Structures." ASME. J. Pressure Vessel Technol. December 2016; 138(6): 060905. https://doi.org/10.1115/1.4032703
Download citation file:
Get Email Alerts
Cited By
Investigation in the Natural Frequency of Wound Tube for Coil-Wound Heat Exchanger
J. Pressure Vessel Technol
Theoretical Study On Thermal Hydraulic Expansion Process of Stainless Steel Lined Clad Pipe
J. Pressure Vessel Technol
Related Articles
Intrinsic Mechanisms Limiting the Use of Carbon Fiber Composite Pressure Vessels
J. Pressure Vessel Technol (December,2016)
Impact Energy Absorption of Continuous Fiber Composite Tubes
J. Eng. Mater. Technol (January,1987)
Delamination During Drilling in Composite Laminates
J. Eng. Ind (August,1990)
Mechanical and Electrical Properties of Glass and Carbon Fiber-Reinforced Composites
J. Energy Resour. Technol (September,1991)
Related Proceedings Papers
Related Chapters
Diamond Is a GAL's Best Friend
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Introductory Survey
Introduction to Plastics Engineering
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition