Volume 129 Issue 1 | J. Pressure Vessel Technol.

Skip Nav Destination

Volume 129, Issue 1

February 2007

ISSN 0094-9930

EISSN 1528-8978

Research Papers

Fluid-Structure Interaction Effects Modeling for the Modal Analysis of a Nuclear Pressure Vessel

Jean-François Sigrist, Daniel Broc, Christian Lainé

J. Pressure Vessel Technol. February 2007, 129(1): 1–6. doi: https://doi.org/10.1115/1.2389025

Abstract

View articletitled, Fluid-Structure Interaction Effects Modeling for the Modal Analysis of a Nuclear Pressure Vessel

Open the PDF for in another window

Topics: Fluid structure interaction , Fluids , Modal analysis , Modeling , Reactor vessels , Stiffness , Nuclear reactors , Finite element analysis , Pressure

Vibration Excitation Forces Due to Two-Phase Flow in Piping Elements

J.-L. Riverin, M. J. Pettigrew

J. Pressure Vessel Technol. February 2007, 129(1): 7–13. doi: https://doi.org/10.1115/1.2388994

Abstract

View articletitled, Vibration Excitation Forces Due to Two-Phase Flow in Piping Elements

Open the PDF for in another window

Topics: Excitation , Flow (Dynamics) , Pipes , Two-phase flow , Vibration , Porosity , Momentum , Water

Acoustic Excitation by Flow in T-Junctions

S. Ziada, A. Scott, D. Arthurs

J. Pressure Vessel Technol. February 2007, 129(1): 14–20. doi: https://doi.org/10.1115/1.2388995

Abstract

View articletitled, Acoustic Excitation by Flow in T-Junctions

Open the PDF for in another window

Topics: Acoustics , Bubbles , Flow (Dynamics) , Junctions , Pipes , Pressure , Separation (Technology) , Resonance , Excitation

Vibration Excitation Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross Flow

C. Zhang, M. J. Pettigrew, N. W. Mureithi

J. Pressure Vessel Technol. February 2007, 129(1): 21–27. doi: https://doi.org/10.1115/1.2388996

Abstract

View articletitled, Vibration Excitation Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross Flow

Open the PDF for in another window

Topics: Cross-flow , Cylinders , Drag (Fluid dynamics) , Excitation , Flow (Dynamics) , Force measurement , Lift (Fluid dynamics) , Porosity , Vibration , Spectra (Spectroscopy)

Effects of Simulated Seismic Loading on LBB Assessment of High Energy Piping

Suneel K. Gupta, Vivek Bhasin, K. K. Vaze, A. K. Ghosh, H. S. Kushwaha

J. Pressure Vessel Technol. February 2007, 129(1): 28–37. doi: https://doi.org/10.1115/1.2388998

Abstract

View articletitled, Effects of Simulated Seismic Loading on LBB Assessment of High Energy Piping

Open the PDF for in another window

Topics: Cycles , Displacement , Fracture (Materials) , Pipes , Stress

Destruction of Cryogenic Pressure Vessel and Piping by Shock Wave

Toshiaki Watanabe, Kazuyuki Hokamoto, Shigeru Itoh

J. Pressure Vessel Technol. February 2007, 129(1): 38–42. doi: https://doi.org/10.1115/1.2388999

Abstract

View articletitled, Destruction of Cryogenic Pressure Vessel and Piping by Shock Wave

Open the PDF for in another window

Topics: Flashing , Nitrogen , Pipes , Pressure vessels , Shock waves , Temperature , Thermal insulation , Pressure , Coolants

Effect of Bolt Tightness on the Behavior of Composite Joints

Sayed A. Nassar, Vinayshankar L. Virupaksha, Saravanan Ganeshmurthy

J. Pressure Vessel Technol. February 2007, 129(1): 43–51. doi: https://doi.org/10.1115/1.2389000

Abstract

View articletitled, Effect of Bolt Tightness on the Behavior of Composite Joints

Open the PDF for in another window

Topics: Composite materials , Stress , Bearings , Damage , Displacement , Aluminum , Finite element analysis

Approximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock

A. E. Segall, R. Akarapu

J. Pressure Vessel Technol. February 2007, 129(1): 52–57. doi: https://doi.org/10.1115/1.2389002

Abstract

View articletitled, Approximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock

Open the PDF for in another window

Topics: Convection , Cylinders , Finite element analysis , Laplace transforms , Stress , Temperature , Thermal shock , Thermoelasticity , Transients (Dynamics) , Vessels

Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction

B. Scott Kessler, A. Sherif El-Gizawy, Douglas E. Smith

J. Pressure Vessel Technol. February 2007, 129(1): 58–65. doi: https://doi.org/10.1115/1.2389004

Abstract

View articletitled, Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction

Open the PDF for in another window

Topics: Artificial neural networks , Finite element analysis , Stress , Flow (Dynamics) , Rheology

Numerical Simulation of In-Service Welding of a Pressurized Pipeline

XiaoLong Xue, ZhiFu Sang, JiaGui Zhu, G. E. O. Widera

J. Pressure Vessel Technol. February 2007, 129(1): 66–72. doi: https://doi.org/10.1115/1.2389005

Abstract

View articletitled, Numerical Simulation of In-Service Welding of a Pressurized Pipeline

Open the PDF for in another window

Topics: Computer simulation , Stress , Temperature , Welding , Pipes , Flow (Dynamics) , Heat

Strength and Buoyancy Analyses of Floating Roof With Continuous Beams and Dome Frames Under Rainwater Loading

Xiushan Sun, Yinghua Liu, Zhangzhi Cen, Shutian Lin

J. Pressure Vessel Technol. February 2007, 129(1): 73–82. doi: https://doi.org/10.1115/1.2389007

Abstract

View articletitled, Strength and Buoyancy Analyses of Floating Roof With Continuous Beams and Dome Frames Under Rainwater Loading

Open the PDF for in another window

Topics: Roofs , Buoyancy , Deflection , Domes (Structural elements)

Autofrettage and Reautofrettage of a Spherical Pressure Vessel

A. P. Parker, X. Huang

J. Pressure Vessel Technol. February 2007, 129(1): 83–88. doi: https://doi.org/10.1115/1.2389020

Abstract

View articletitled, Autofrettage and Reautofrettage of a Spherical Pressure Vessel

Open the PDF for in another window

Topics: Autofrettage , Pressure vessels , Vessels , Stress , Steel , Stress analysis (Engineering) , Pressure

Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry

Sayed A. Nassar, Aidong Meng

J. Pressure Vessel Technol. February 2007, 129(1): 89–95. doi: https://doi.org/10.1115/1.2389024

Abstract

View articletitled, Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry

Open the PDF for in another window

Topics: Clamps (Tools) , Deformation , Electronic speckle pattern interferometry , Stress , Fasteners , Finite element analysis

Fatigue Crack Modeling and Simulation Based on Continuum Damage Mechanics

Masakazu Takagaki, Toshiya Nakamura

J. Pressure Vessel Technol. February 2007, 129(1): 96–102. doi: https://doi.org/10.1115/1.2388993

Abstract

View articletitled, Fatigue Crack Modeling and Simulation Based on Continuum Damage Mechanics

Open the PDF for in another window

Topics: Damage , Fracture (Materials) , Simulation , Fatigue cracks , Crack propagation , Stress , Anisotropy , Low cycle fatigue , Damage mechanics

Thermal Opening Technique for Nondestructive Evaluation of Closed Cracks

Hironori Tohmyoh, Masumi Saka, Yuichi Kondo

J. Pressure Vessel Technol. February 2007, 129(1): 103–108. doi: https://doi.org/10.1115/1.2389026

Abstract

View articletitled, Thermal Opening Technique for Nondestructive Evaluation of Closed Cracks

Open the PDF for in another window

Topics: Electromagnetic scattering , Fracture (Materials) , Radiation scattering , Scattering (Physics) , Thermal stresses , Waves , Nondestructive evaluation , Signals

Reliability of Sampling Inspection Schemes Applied to Replacement Steam Generators

Guy Roussel, Leon Cizelj

J. Pressure Vessel Technol. February 2007, 129(1): 109–117. doi: https://doi.org/10.1115/1.2389027

Abstract

View articletitled, Reliability of Sampling Inspection Schemes Applied to Replacement Steam Generators

Open the PDF for in another window

Topics: Boilers , Inspection , Probability

Post-Expansion Tube Response Under Mechanical and Hydraulic Expansion—A Comparative Study

A. C. Seibi, A. Karrech, T. Pervez

J. Pressure Vessel Technol. February 2007, 129(1): 118–124. doi: https://doi.org/10.1115/1.2389028

Abstract

View articletitled, Post-Expansion Tube Response Under Mechanical and Hydraulic Expansion—A Comparative Study

Open the PDF for in another window

Topics: Damping , Displacement , Equations of motion , Fluids , Pressure , Stress , Waves , Wave propagation

Thermal Shock Cracking: Design and Assessment Guidelines

John W. H. Price

J. Pressure Vessel Technol. February 2007, 129(1): 125–132. doi: https://doi.org/10.1115/1.2389029

Abstract

View articletitled, Thermal Shock Cracking: Design and Assessment Guidelines

Open the PDF for in another window

Topics: Design , Fracture (Materials) , Fracture (Process) , Stress , Thermal shock , Cracking (Materials)

Metallographic Examination and Validation of Thermal Effects in Hypervelocity Gouging

John D. Cinnamon, Anthony N. Palazotto

J. Pressure Vessel Technol. February 2007, 129(1): 133–141. doi: https://doi.org/10.1115/1.2389030

Abstract

View articletitled, Metallographic Examination and Validation of Thermal Effects in Hypervelocity Gouging

Open the PDF for in another window

Topics: Chisels , Cooling , Rails , Steel , Temperature , Heat , Heat conduction , Optical microscopy , Shear (Mechanics) , Scanning electron microscopes

Plastic Zone Coalescence and Edge Break Conditions of Internal Cracks in a Semi-infinite Sheet

Toshihiko Nishimura

J. Pressure Vessel Technol. February 2007, 129(1): 142–147. doi: https://doi.org/10.1115/1.2389031

Abstract

View articletitled, Plastic Zone Coalescence and Edge Break Conditions of Internal Cracks in a Semi-infinite Sheet

Open the PDF for in another window

Topics: Fracture (Materials) , Stress

Asset Management Evaluation: A Pilot Case Study

C. E. Bauby, B. Charbonnier, P. Haik, S. Lacombe, J. Lonchampt, E. Remy

J. Pressure Vessel Technol. February 2007, 129(1): 148–154. doi: https://doi.org/10.1115/1.2389032

Abstract

View articletitled, Asset Management Evaluation: A Pilot Case Study

Open the PDF for in another window

Topics: Algorithms , Computer software , Economics , Maintenance , Safety , Probability , Density , Turbines , Decision making , Industrial plants

Use of Duplex Stainless Steel in Economic Design of a Pressure Vessel

Milan Veljkovic, Jonas Gozzi

J. Pressure Vessel Technol. February 2007, 129(1): 155–161. doi: https://doi.org/10.1115/1.2389034

Abstract

View articletitled, Use of Duplex Stainless Steel in Economic Design of a Pressure Vessel

Open the PDF for in another window

Topics: Design , Finite element analysis , Hardening , Nozzles , Pressure vessels , Stainless steel , Stress , Membranes , Steel

A Study on Fluid Excitation Forces Acting on a Rotated Square Tube Bundle of $T ∕ D = 3.1$ in Cross-Flow

Fumio Inada, Kimitoshi Yoneda, Akira Yasuo, Takashi Nishihara

J. Pressure Vessel Technol. February 2007, 129(1): 162–168. doi: https://doi.org/10.1115/1.2409315

Abstract

View articletitled, A Study on Fluid Excitation Forces Acting on a Rotated Square Tube Bundle of <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>T</mi><mo>∕</mo><mi>D</mi><mo>=</mo><mn>3.1</mn></mrow></math></span> in Cross-Flow

Open the PDF for in another window

Topics: Excitation , Fluids , Drag (Fluid dynamics) , Vibration

Eddy Current Examination of Fatigue Cracks in Inconel Welds

Weiying Cheng, Ichiro Komura, Mitsuharu Shiwa, Shigeru Kanemoto

J. Pressure Vessel Technol. February 2007, 129(1): 169–174. doi: https://doi.org/10.1115/1.2435718

Abstract

View articletitled, Eddy Current Examination of Fatigue Cracks in Inconel Welds

Open the PDF for in another window

Topics: Eddies (Fluid dynamics) , Eddy currents (Electricity) , Electrical discharge machining , Fatigue cracks , Fracture (Materials) , Probes , Signals , Welded joints , Base metals , Eddy current testing

Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Massimiliano Pau, Antonio Baldi

J. Pressure Vessel Technol. February 2007, 129(1): 175–185. doi: https://doi.org/10.1115/1.2435719

Abstract

View articletitled, Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Open the PDF for in another window

Topics: Bolted joints , Pressure , Calibration , Finite element model , Reflection , Stress

Review and Consideration of Unsettled Problems on Evaluation of Fatigue Damage in LWR Water

Makoto Higuchi, Katsumi Sakaguchi

J. Pressure Vessel Technol. February 2007, 129(1): 186–194. doi: https://doi.org/10.1115/1.2409316

Abstract

View articletitled, Review and Consideration of Unsettled Problems on Evaluation of Fatigue Damage in LWR Water

Open the PDF for in another window

Topics: Fatigue , Fatigue life , Stainless steel , Water , Light water reactors , Fatigue damage , Carbon , Boiling water reactors , Steel , Flow (Dynamics)

Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded Wall

Denis D. Rickman, Donald W. Murrell

J. Pressure Vessel Technol. February 2007, 129(1): 195–204. doi: https://doi.org/10.1115/1.2409317

Abstract

View articletitled, Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded Wall

Open the PDF for in another window

Topics: Pressure , Waves , Impulse (Physics)

Selecting Suitable Probes Distances for Sizing Deep Surface Cracks Using the DCPD Technique

Fumio Takeo, Masumi Saka, S. Reaz Ahmed, Seiichi Hamada, Manabu Hayakawa

J. Pressure Vessel Technol. February 2007, 129(1): 205–210. doi: https://doi.org/10.1115/1.2409319

Abstract

View articletitled, Selecting Suitable Probes Distances for Sizing Deep Surface Cracks Using the DCPD Technique

Open the PDF for in another window

Topics: Fracture (Materials) , Probes , Surface cracks , Sensors

Design Innovation Papers

A Single Technically Consistent Design Formula for the Thickness of Cylindrical Sections Under Internal Pressure

John D. Fishburn

J. Pressure Vessel Technol. February 2007, 129(1): 211–215. doi: https://doi.org/10.1115/1.2389035

Abstract

View articletitled, A Single Technically Consistent Design Formula for the Thickness of Cylindrical Sections Under Internal Pressure

Open the PDF for in another window

Topics: Boilers , Design , Pipes , Pressure , Stress , Pressure vessels , Creep

High Pressure Hydrogen Storage Tank: A Parametric Design Study

I. Cumalioglu, Y. Ma, A. Ertas, T. Maxwell

J. Pressure Vessel Technol. February 2007, 129(1): 216–222. doi: https://doi.org/10.1115/1.2389036

Abstract

View articletitled, High Pressure Hydrogen Storage Tank: A Parametric Design Study

Open the PDF for in another window

Topics: Density , Exterior walls , High pressure (Physics) , Hydrogen , Hydrogen storage , Pressure , Pressure vessels , Finite element analysis

Research Papers

Fluid-Structure Interaction Effects Modeling for the Modal Analysis of a Nuclear Pressure Vessel

Vibration Excitation Forces Due to Two-Phase Flow in Piping Elements

Acoustic Excitation by Flow in T-Junctions

Vibration Excitation Force Measurements in a Rotated Triangular Tube Bundle Subjected to Two-Phase Cross Flow

Effects of Simulated Seismic Loading on LBB Assessment of High Energy Piping

Destruction of Cryogenic Pressure Vessel and Piping by Shock Wave

Effect of Bolt Tightness on the Behavior of Composite Joints

Approximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock

Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction

Numerical Simulation of In-Service Welding of a Pressurized Pipeline

Strength and Buoyancy Analyses of Floating Roof With Continuous Beams and Dome Frames Under Rainwater Loading

Autofrettage and Reautofrettage of a Spherical Pressure Vessel

Optical Monitoring of Bolt Tightening Using 3D Electronic Speckle Pattern Interferometry

Fatigue Crack Modeling and Simulation Based on Continuum Damage Mechanics

Thermal Opening Technique for Nondestructive Evaluation of Closed Cracks

Reliability of Sampling Inspection Schemes Applied to Replacement Steam Generators

Post-Expansion Tube Response Under Mechanical and Hydraulic Expansion—A Comparative Study

Thermal Shock Cracking: Design and Assessment Guidelines

Metallographic Examination and Validation of Thermal Effects in Hypervelocity Gouging

Plastic Zone Coalescence and Edge Break Conditions of Internal Cracks in a Semi-infinite Sheet

Asset Management Evaluation: A Pilot Case Study

Use of Duplex Stainless Steel in Economic Design of a Pressure Vessel

A Study on Fluid Excitation Forces Acting on a Rotated Square Tube Bundle of $T ∕ D = 3.1$ in Cross-Flow

Eddy Current Examination of Fatigue Cracks in Inconel Welds

Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Review and Consideration of Unsettled Problems on Evaluation of Fatigue Damage in LWR Water

Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded Wall

Selecting Suitable Probes Distances for Sizing Deep Surface Cracks Using the DCPD Technique

Design Innovation Papers

A Single Technically Consistent Design Formula for the Thickness of Cylindrical Sections Under Internal Pressure

High Pressure Hydrogen Storage Tank: A Parametric Design Study

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design Innovation Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only