This paper describes a nonlinear model and analysis of the axial transient response of the sector-shaped hydrodynamic thrust bearing-rotor system in a turbo-expander under a suddenly applied step load. The model is comprised of a time-dependent Reynolds Equation for oil film forces, and a vibration equation for the axial shaft system. The time-dependent form of the Reynolds Equation is solved by a finite difference method with a successive over-relaxation scheme, and the vibration equation is solved by the fourth-order Runge-Kutta method and the Adams method. In addition, a linear analysis is attempted in order to evaluate its suitability for the situation under consideration. The result of the analysis has shown that the linear model is unsuited, while the nonlinear analysis appears reasonable. Two system parameters, the initial oil film thickness and the angle of the inclination of the tapered land in a thrust bearing, are shown to have significant impacts on the transient response under consideration, and to be possibly optimized to achieve a minimum axial transient response.

Issue Section:
Technical Papers
Keywords:
transient response, hydrodynamics, machine bearings, vibrations, finite difference methods, Runge-Kutta methods
Topics:
Bearings, Rotors, Thrust, Thrust bearings, Transients (Dynamics), Film thickness, Vibration
1.
Gregory
,
E. W.
, and
Maday
,
C. J.
,
1977
, “
A Class of Maximum Load Capacity Sector Thrust Bearings
,”
ASME J. Lubr. Technol.
,
99
, pp.
180
–
186
.
2.
Singh
,
A. P.
,
1987
, “
An Overall Optimum Design of a Sector-Shaped Thrust Bearing With Continuous Circumferential Surface
,”
Wear
,
117
, pp.
49
–
77
.
3.
Launder
,
B. E.
, and
Leschziner
,
M.
,
1978
, “
Flow in Finite-Width, Thrust Bearings Including Inertial Effects, 1. Laminar Flow
,”
ASME J. Lubr. Technol.
,
100
, pp.
330
–
336
.
4.
Safer
,
Z.
, and
Szeri
,
A. Z.
,
1974
, “
Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes
,”
ASME J. Lubr. Technol.
,
96
, pp.
48
–
55
.
5.
Suganami
,
T.
, and
Szeri
,
A. Z.
,
1979
, “
A Thermohydrodynamic Analysis of Journal Bearings
,”
ASME J. Lubr. Technol.
,
101
, pp.
21
–
28
.
6.
Chowdhury
,
S. J.
, and
Ahmadi
,
G.
,
1986
, “
Thermodynamic Analysis of Wide Thrust Bearings Operating in Laminar Inertial Flow Regimes
,”
Tribol. Int.
,
19
, pp.
281
–
288
.
7.
Mote
, Jr.,
C. D.
,
Schajer
,
G. S.
, and
Telle
,
L. I.
,
1983
, “
Hydrodynamic Sector Bearings as Circular Saw Guides
,”
ASME J. Lubr. Technol.
,
105
, pp.
67
–
76
.
8.
Tichy
,
J. A.
, and
Modest
,
M. F.
,
1978
, “
Squeeze Film Flow Between Arbitrary Two-Dimensional Surface Subject to Normal Oscillations
,”
ASME J. Lubr. Technol.
,
100
, pp.
316
–
322
.
9.
Modest
,
M. F.
, and
Tichy
,
J. A.
,
1978
, “
The Slider Bearing With Small Superimposed Normal Oscillations, Including the Effect of Fluid Inertia
,”
ASLE Trans.
,
22
, pp.
358
–
360
.
10.
Murray
,
Y. D.
, and
Mote
, Jr.,
C. D.
,
1983
, “
Analysis of a Plane Inclined Guide Bearing Under Transverse Vibration and Translation of a Plate
,”
ASME J. Lubr. Technol.
,
105
, pp.
335
–
341
.
11.
Tan
,
C. A.
, and
Mote
, Jr.,
C. D.
,
1990
, “
Analysis of a Hydrodynamic Bearing Under Transverse Vibration of an Axially Moving Band
,”
ASME J. Tribol.
,
112
, pp.
514
–
523
.
12.
Iordanoff
,
I.
,
Stefan
,
P.
,
Boudet
,
R.
, and
Poirier
,
D.
,
1995
, “
Dynamic Analysis of a Thrust Bearing—Effect of Misalignment and Load
,”
Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol.
,
209
, pp.
189
–
194
.
13.
Zelenka
,
R. E.
, and
Mote
, Jr.,
C. D.
,
1991
, “
Measurement of the Lift Force Developed in an Oscillating and Translating Hydrodynamic Sector Bearing
,”
Wear
,
142
, pp.
227
–
238
.
14.
Constantinescu
,
V. N.
,
Galetuse
,
S.
, and
Kennedy
,
F.
,
1975
, “
On the Comparison Between Lubrication Theory, Including Turbulence and Inertia Forces, and Some Existing Experimental Data
,”
ASME J. Lubr. Technol.
,
97
, pp.
439
–
449
.
15.
Tichy
,
J. A.
, and
Chen
,
S. H.
,
1985
, “
Plane Slider Bearing Load Due to Fluid Inertia-Experiment and Theory
,”
ASME J. Tribol.
,
107
, pp.
32
–
38
.
16.
Tichy
,
J. A.
, and
Winer
,
W. O.
,
1970
, “
Inertia Considerations in Parallel Circular Squeeze Film Bearing
,”
ASME J. Lubr. Technol.
,
92
, pp.
588
–
592
.
17.
Parkins
,
D. W.
, and
Stanley
,
W. T.
,
1982
, “
Characteristics of an Oil Squeeze Film
,”
ASME J. Lubr. Technol.
,
104
, pp.
497
–
503
.
18.
Parkins
,
D. W.
, and
Woollam
,
J. H.
,
1986
, “
Behavior of an Oscillating Oil Squeeze Film
,”
ASME J. Tribol.
,
108
, pp.
639
–
644
.
19.
Wang
,
Y. K.
, and
Mote
, Jr.,
C. D.
,
1994
, “
Experimental Evaluation of Sector-Shaped Hydrodynamic Thrust Bearing Under Translation and Transverse Vibration
,”
ASME J. Tribol.
,
116
, pp.
521
–
527
.
20.
Lund
,
J. W.
,
1976
, “
Linear Transient Response of a Flexible Rotor Supported in Gas-Lubricated Bearing
,”
ASME J. Lubr. Technol.
,
98
, pp.
57
–
65
.
21.
Allaire
,
P. R.
,
Li
,
D. F.
, and
Choy
,
K. C.
,
1980
, “
Transient Unbalance Response of Four Multilobe Journal Bearing
,”
ASME J. Lubr. Technol.
,
102
, pp.
300
–
307
.
22.
Li
,
D. F.
,
Choy
,
K. C.
, and
Allaire
,
P. R.
,
1980
, “
Stability and Transient Characteristics of Four Multilobe Journal Bearing Configurations
,”
ASME J. Lubr. Technol.
,
102
, pp.
291
–
299
.
23.
Akers
,
A.
,
Michaelson
,
S.
, and
Cameron
,
A.
,
1971
, “
Stability Contours for a Whirling Finite Journal Bearing
,”
ASME J. Lubr. Technol.
,
92
, pp.
170
–
190
.
24.
Pai
,
R.
, and
Majumdar
,
B. C.
,
1992
, “
Stability of Submerged Four-Lobe Oil Journal Bearings Under Dynamic Load
,”
Wear
,
154
, pp.
95
–
108
.
25.
Pai
,
R.
, and
Majumdar
,
B. C.
,
1992
, “
Theoretical Analysis on Conical Whirl Instability of Unloaded Submerged Oil Journal Bearings
,”
Wear
,
154
, pp.
309
–
316
.
Copyright © 2003
 by ASME
You do not currently have access to this content.