The three-dimensional point-tracking (3DPT) measurement approach is used in conjunction with finite element (FE) method and modal expansion technique to predict full-field dynamic response on a rotating structure. A rotating three-bladed wind turbine rotor was subjected to different loading scenarios, and the displacement of optical targets located on the blades was measured using 3DPT. The out-of-plane measured displacement of the targets was expanded and applied to the FE model of the turbine to extract full-field strain on the turbine. The sensitivity of the proposed approach to the number of optical targets was also studied in this paper. The results show that the dynamic strain on a structure can be extracted with a very limited set of measurement points (optical targets) placed on appropriate locations on the blades. It was shown that the proposed technique is able to extract dynamic strain all over the entire structure, even inside the structure beyond the line of sight of the measurement system. Because the method is based on a noncontacting measurement approach, it can be readily applied to a variety of structures having different boundary conditions.
A Noncontacting Approach for Full-Field Strain Monitoring of Rotating Structures
Contributed by the Technical Committee on Vibration and Sound of ASME for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received April 12, 2015; final manuscript received October 31, 2015; published online April 7, 2016. Assoc. Editor: John Yu.
- Views Icon Views
- Share Icon Share
- Search Site
Baqersad, J., Poozesh, P., Niezrecki, C., and Avitabile, P. (April 7, 2016). "A Noncontacting Approach for Full-Field Strain Monitoring of Rotating Structures." ASME. J. Vib. Acoust. June 2016; 138(3): 031008. https://doi.org/10.1115/1.4032721
Download citation file: